[PATCH v2 7/7] iommu/riscv: Paging domain support
Baolu Lu
baolu.lu at linux.intel.com
Sun Apr 21 22:21:05 PDT 2024
On 4/19/24 12:32 AM, Tomasz Jeznach wrote:
> Introduce first-stage address translation support.
>
> Page table configured by the IOMMU driver will use the same format
> as the CPU’s MMU, and will fallback to identity translation if the
> page table format configured for the MMU is not supported by the
> IOMMU hardware.
>
> This change introduces IOTINVAL.VMA command, required to invalidate
> any cached IOATC entries after mapping is updated and/or removed from
> the paging domain. Invalidations for the non-leaf page entries will
> be added to the driver code in separate patch series, following spec
> update to clarify non-leaf cache invalidation command. With this patch,
> allowing only 4K mappings and keeping non-leaf page entries in memory
> this should be a reasonable simplification.
>
> Signed-off-by: Tomasz Jeznach <tjeznach at rivosinc.com>
> ---
> drivers/iommu/riscv/Kconfig | 1 +
> drivers/iommu/riscv/iommu.c | 467 +++++++++++++++++++++++++++++++++++-
> 2 files changed, 466 insertions(+), 2 deletions(-)
>
[...]
> +
> static int riscv_iommu_attach_domain(struct riscv_iommu_device *iommu,
> struct device *dev,
> struct iommu_domain *iommu_domain)
> {
> struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> + struct riscv_iommu_domain *domain;
> struct riscv_iommu_dc *dc;
> + struct riscv_iommu_bond *bond = NULL, *b;
> + struct riscv_iommu_command cmd;
> u64 fsc, ta, tc;
> int i;
>
> @@ -769,6 +838,20 @@ static int riscv_iommu_attach_domain(struct riscv_iommu_device *iommu,
> ta = 0;
> tc = RISCV_IOMMU_DC_TC_V;
> fsc = FIELD_PREP(RISCV_IOMMU_DC_FSC_MODE, RISCV_IOMMU_DC_FSC_MODE_BARE);
> + } else if (iommu_domain->type & __IOMMU_DOMAIN_PAGING) {
> + domain = iommu_domain_to_riscv(iommu_domain);
> +
> + ta = FIELD_PREP(RISCV_IOMMU_PC_TA_PSCID, domain->pscid);
> + tc = RISCV_IOMMU_DC_TC_V;
> + if (domain->amo_enabled)
> + tc |= RISCV_IOMMU_DC_TC_SADE;
> + fsc = FIELD_PREP(RISCV_IOMMU_PC_FSC_MODE, domain->pgd_mode) |
> + FIELD_PREP(RISCV_IOMMU_PC_FSC_PPN, virt_to_pfn(domain->pgd_root));
> +
> + bond = kzalloc(sizeof(*bond), GFP_KERNEL);
> + if (!bond)
> + return -ENOMEM;
> + bond->dev = dev;
> } else {
> /* This should never happen. */
> return -ENODEV;
> @@ -787,12 +870,390 @@ static int riscv_iommu_attach_domain(struct riscv_iommu_device *iommu,
> xchg64(&dc->ta, ta);
> xchg64(&dc->tc, tc);
>
> - /* Device context invalidation will be required. Ignoring for now. */
> + if (!(tc & RISCV_IOMMU_DC_TC_V))
> + continue;
> +
> + /* Invalidate device context cache */
> + riscv_iommu_cmd_iodir_inval_ddt(&cmd);
> + riscv_iommu_cmd_iodir_set_did(&cmd, fwspec->ids[i]);
> + riscv_iommu_cmd_send(iommu, &cmd, 0);
> +
> + if (FIELD_GET(RISCV_IOMMU_PC_FSC_MODE, fsc) == RISCV_IOMMU_DC_FSC_MODE_BARE)
> + continue;
> +
> + /* Invalidate last valid PSCID */
> + riscv_iommu_cmd_inval_vma(&cmd);
> + riscv_iommu_cmd_inval_set_pscid(&cmd, FIELD_GET(RISCV_IOMMU_DC_TA_PSCID, ta));
> + riscv_iommu_cmd_send(iommu, &cmd, 0);
> + }
> +
> + /* Synchronize directory update */
> + riscv_iommu_cmd_iofence(&cmd);
> + riscv_iommu_cmd_send(iommu, &cmd, RISCV_IOMMU_IOTINVAL_TIMEOUT);
> +
> + /* Track domain to devices mapping. */
> + if (bond)
> + list_add_rcu(&bond->list, &domain->bonds);
> +
> + /* Remove tracking from previous domain, if needed. */
> + iommu_domain = iommu_get_domain_for_dev(dev);
Calling iommu_get_domain_for_dev() in the domain attaching path is very
fragile because it heavily depends on the order of calling the attach
callback and setting the domain pointer in the core.
Perhaps the driver can use dev_iommu_priv_set/get() to keep the active
domain in the per-device private data?
> + if (iommu_domain && !!(iommu_domain->type & __IOMMU_DOMAIN_PAGING)) {
> + domain = iommu_domain_to_riscv(iommu_domain);
> + bond = NULL;
> + rcu_read_lock();
> + list_for_each_entry_rcu(b, &domain->bonds, list) {
> + if (b->dev == dev) {
> + bond = b;
> + break;
> + }
> + }
> + rcu_read_unlock();
> +
> + if (bond) {
> + list_del_rcu(&bond->list);
> + kfree_rcu(bond, rcu);
> + }
> + }
> +
> + return 0;
> +}
Best regards,
baolu
More information about the linux-riscv
mailing list