[PATCH v3 0/2] riscv: improve nommu and timer-clint

[Jisheng Zhang]

On Wed, Apr 10, 2024 at 10:23:45PM +0800, Jisheng Zhang wrote:
> As is known, the sophgo CV1800B contains so called little core, which
> is C906 w/o MMU, so I want to run nommu linux on it. This series is
> the result of the bring up. After this series, w/ proper dts, we can
> run nommu linux on milkv duo's little core.
> 
> First of all, patch1 removes the PAGE_OFFSET hardcoding by introducing
> DRAM_BASE Kconfig option.
> 
> Secondly, to use the T-HEAD C9xx clint in RISCV-M NOMMU env, we need
> to take care two points:
> 
> 1.The mtimecmp in T-Head C9xx clint only supports 32bit read/write,
> implement such support.
> 
> 2. As pointed out by commit ca7810aecdba ("lib: utils/timer: mtimer:
> add a quirk for lacking mtime register") of opensbi:
> 
> "T-Head developers surely have a different understanding of time CSR and
> CLINT's mtime register with SiFive ones, that they did not implement
> the mtime register at all -- as shown in openC906 source code, their
> time CSR value is just exposed at the top of their processor IP block
> and expects an external continous counter, which makes it not
> overrideable, and thus mtime register is not implemented, even not for
> reading. However, if CLINTEE is not enabled in T-Head's MXSTATUS
> extended CSR, these systems still rely on the mtimecmp registers to
> generate timer interrupts. This makes it necessary to implement T-Head
> C9xx CLINT support in OpenSBI MTIMER driver, which skips implementing
> reading mtime register and falls back to default code that reads time
> CSR."
> 
> So, we need to fall back to read time CSR instead of mtime register.
> Add riscv_csr_time_available static key for this purpose.
> 
> The second patch adds T-Head C9xxx clint support to timer-clint driver
> by taking care of above two points.
> 
> Since v2:
>   - drop CONFIG_CLINT_USE_CSR_INSTEADOF_MTIME, instead we use runtime
>     code patch to dynamically enable CSR TIME code path or MTIME code
>     path.
> 
> Since v1:
>   - fix c900_clint_timer_init_dt() defined but not used build warning
>   - add option CONFIG_CLINT_USE_CSR_INSTEADOF_MTIME instead of removing
>     mtime usage for all platforms, since not all platforms implement the
>     time CSR in HW in M mode.
>   - rebase on the timer-clint improvement series
> https://lore.kernel.org/linux-riscv/20240406111757.1597-1-jszhang@kernel.org/T/#t

Hi Palmer, Daniel,

This series itself relies on the timer-clint improvement series
https://lore.kernel.org/linux-riscv/20240406111757.1597-1-jszhang@kernel.org/T/#t

But as suggested by Clément, it's better to rebase the patch1 on
the Samuel's work which has been merged into riscv for-next,
So I have two dependencies now, how do I handle this series then?

Could I leave patch1 alone and move patch2 into the timer-clint
improvement series? Any suggestion?

Thanks in advance
> 
> 
> Jisheng Zhang (2):
>   riscv: nommu: remove PAGE_OFFSET hardcoding
>   clocksource/drivers/timer-clint: Add T-Head C9xx clint
> 
>  arch/riscv/Kconfig                |  8 +++++-
>  arch/riscv/include/asm/clint.h    |  2 ++
>  arch/riscv/include/asm/timex.h    | 18 +++++++++---
>  drivers/clocksource/timer-clint.c | 48 +++++++++++++++++++++++++++----
>  4 files changed, 66 insertions(+), 10 deletions(-)
> 
> -- 
> 2.43.0
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv