[PATCH v2 1/7] dt-bindings: iommu: riscv: Add bindings for RISC-V IOMMU
Tomasz Jeznach
tjeznach at rivosinc.com
Thu Apr 18 09:32:19 PDT 2024
Add bindings for the RISC-V IOMMU device drivers.
Co-developed-by: Anup Patel <apatel at ventanamicro.com>
Signed-off-by: Anup Patel <apatel at ventanamicro.com>
Signed-off-by: Tomasz Jeznach <tjeznach at rivosinc.com>
---
.../bindings/iommu/riscv,iommu.yaml | 149 ++++++++++++++++++
MAINTAINERS | 7 +
2 files changed, 156 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iommu/riscv,iommu.yaml
diff --git a/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml
new file mode 100644
index 000000000000..d6522ddd43fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/riscv,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V IOMMU Architecture Implementation
+
+maintainers:
+ - Tomasz Jeznach <tjeznach at rivosinc.com>
+
+description: |+
+ The RISC-V IOMMU provides memory address translation and isolation for
+ input and output devices, supporting per-device translation context,
+ shared process address spaces including the ATS and PRI components of
+ the PCIe specification, two stage address translation and MSI remapping.
+ It supports identical translation table format to the RISC-V address
+ translation tables with page level access and protection attributes.
+ Hardware uses in-memory command and fault reporting queues with wired
+ interrupt or MSI notifications.
+
+ Visit https://github.com/riscv-non-isa/riscv-iommu for more details.
+
+ For information on assigning RISC-V IOMMU to its peripheral devices,
+ see generic IOMMU bindings.
+
+properties:
+ # For PCIe IOMMU hardware compatible property should contain the vendor
+ # and device ID according to the PCI Bus Binding specification.
+ # Since PCI provides built-in identification methods, compatible is not
+ # actually required. For non-PCIe hardware implementations 'riscv,iommu'
+ # should be specified along with 'reg' property providing MMIO location.
+ compatible:
+ oneOf:
+ - items:
+ - const: riscv,pci-iommu
+ - const: pci1efd,edf1
+ - items:
+ - const: pci1efd,edf1
+ - items:
+ - const: riscv,iommu
+
+ reg:
+ maxItems: 1
+ description:
+ For non-PCI devices this represents base address and size of for the
+ IOMMU memory mapped registers interface.
+ For PCI IOMMU hardware implementation this should represent an address
+ of the IOMMU, as defined in the PCI Bus Binding reference. The reg
+ property is a five-cell address encoded as (phys.hi phys.mid phys.lo
+ size.hi size.lo), where phys.hi should contain the device's BDF as
+ 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be zero.
+
+ '#iommu-cells':
+ const: 1
+ description:
+ Has to be one. The single cell describes the requester id emitted
+ by a master to the IOMMU.
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+ description:
+ Wired interrupt vectors available for RISC-V IOMMU to notify the
+ RISC-V HARTS. The cause to interrupt vector is software defined
+ using IVEC IOMMU register.
+
+ msi-parent: true
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+ - |+
+ /* Example 1 (IOMMU device with wired interrupts) */
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ iommu1: iommu at 1bccd000 {
+ compatible = "riscv,iommu";
+ reg = <0x1bccd000 0x1000>;
+ interrupt-parent = <&aplic_smode>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH>,
+ <34 IRQ_TYPE_LEVEL_HIGH>,
+ <35 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ };
+
+ /* Device with two IOMMU device IDs, 0 and 7 */
+ master1 {
+ iommus = <&iommu1 0>, <&iommu1 7>;
+ };
+
+ - |+
+ /* Example 2 (IOMMU device with shared wired interrupt) */
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ iommu2: iommu at 1bccd000 {
+ compatible = "riscv,iommu";
+ reg = <0x1bccd000 0x1000>;
+ interrupt-parent = <&aplic_smode>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ };
+
+ - |+
+ /* Example 3 (IOMMU device with MSIs) */
+ iommu3: iommu at 1bcdd000 {
+ compatible = "riscv,iommu";
+ reg = <0x1bccd000 0x1000>;
+ msi-parent = <&imsics_smode>;
+ #iommu-cells = <1>;
+ };
+
+ - |+
+ /* Example 4 (IOMMU PCIe device with MSIs) */
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie at 30000000 {
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x0 0x30000000 0x0 0x1000000>;
+ ranges = <0x02000000 0x0 0x41000000 0x0 0x41000000 0x0 0x0f000000>;
+
+ /*
+ * The IOMMU manages all functions in this PCI domain except
+ * itself. Omit BDF 00:01.0.
+ */
+ iommu-map = <0x0 &iommu0 0x0 0x8
+ 0x9 &iommu0 0x9 0xfff7>;
+
+ /* The IOMMU programming interface uses slot 00:01.0 */
+ iommu0: iommu at 1,0 {
+ compatible = "pci1efd,edf1";
+ reg = <0x800 0 0 0 0>;
+ #iommu-cells = <1>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index c23fda1aa1f0..2657f9eae84c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18966,6 +18966,13 @@ F: arch/riscv/
N: riscv
K: riscv
+RISC-V IOMMU
+M: Tomasz Jeznach <tjeznach at rivosinc.com>
+L: iommu at lists.linux.dev
+L: linux-riscv at lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/iommu/riscv,iommu.yaml
+
RISC-V MICROCHIP FPGA SUPPORT
M: Conor Dooley <conor.dooley at microchip.com>
M: Daire McNamara <daire.mcnamara at microchip.com>
--
2.34.1
More information about the linux-riscv
mailing list