[PATCH v5 2/2] riscv: dts: sophgo: add initial Milk-V Duo S board support

Inochi Amaoto inochiama at outlook.com
Wed Apr 17 02:34:44 PDT 2024


On Wed, Apr 17, 2024 at 08:53:11AM GMT, michael.opdenacker at bootlin.com wrote:
> From: Michael Opdenacker <michael.opdenacker at bootlin.com>
> 
> This adds initial support for the Milk-V Duo S board
> (https://milkv.io/duo-s), enabling the serial port,
> making it possible to boot Linux to the command line.
> 
> Link: https://lore.kernel.org/linux-riscv/171266958507.1032617.9460749136730849811.robh@kernel.org/T/#t
> 
> Signed-off-by: Michael Opdenacker <michael.opdenacker at bootlin.com>
> ---
>  arch/riscv/boot/dts/sophgo/Makefile           |  1 +
>  .../boot/dts/sophgo/sg2000-milkv-duos.dts     | 34 +++++++++++++++++++
>  2 files changed, 35 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
> 
> diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile
> index 57ad82a61ea6..e008acb5240f 100644
> --- a/arch/riscv/boot/dts/sophgo/Makefile
> +++ b/arch/riscv/boot/dts/sophgo/Makefile
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
>  dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
> +dtb-$(CONFIG_ARCH_SOPHGO) += sg2000-milkv-duos.dtb
>  dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
> diff --git a/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
> new file mode 100644
> index 000000000000..c1ecf97d5e93
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2024 Michael Opdenacker <michael.opdenacker at bootlin.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "cv1812h.dtsi"
> +
> +/ {
> +	model = "Milk-V Duo S";
> +	compatible = "milkv,duos", "sophgo,cv1812h";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory at 80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>;
> +	};

Add a cpu specific file, and move this to it.

> +};
> +
> +&osc {
> +	clock-frequency = <25000000>;
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> -- 
> 2.34.1
> 

Add necessary DT node in the cpu specific file. (clint, 
plic and clk). You also need to rebase your patch based
on sophgo/for-next.




More information about the linux-riscv mailing list