[PATCH v7 00/24] RISC-V SBI v2.0 PMU improvements and Perf sampling in KVM guest
Atish Patra
atishp at rivosinc.com
Tue Apr 16 11:43:57 PDT 2024
This series implements SBI PMU improvements done in SBI v2.0[1] i.e. PMU snapshot
and fw_read_hi() functions.
SBI v2.0 introduced PMU snapshot feature which allows the SBI implementation
to provide counter information (i.e. values/overflow status) via a shared
memory between the SBI implementation and supervisor OS. This allows to minimize
the number of traps in when perf being used inside a kvm guest as it relies on
SBI PMU + trap/emulation of the counters.
The current set of ratified RISC-V specification also doesn't allow scountovf
to be trap/emulated by the hypervisor. The SBI PMU snapshot bridges the gap
in ISA as well and enables perf sampling in the guest. However, LCOFI in the
guest only works via IRQ filtering in AIA specification. That's why, AIA
has to be enabled in the hardware (at least the Ssaia extension) in order to
use the sampling support in the perf.
Here are the patch wise implementation details.
PATCH 1,4,7,8,9,10,11,15 : Generic cleanups/improvements.
PATCH 2,3,14 : FW_READ_HI function implementation
PATCH 5-6: Add PMU snapshot feature in sbi pmu driver
PATCH 12-13: KVM implementation for snapshot and sampling in kvm guests
PATCH 16-17: Generic improvements for kvm selftests
PATCH 18-22: KVM selftests for SBI PMU extension
The series is based on v6.9-rc4 and is available at:
https://github.com/atishp04/linux/tree/kvm_pmu_snapshot_v7
The kvmtool patch is also available at:
https://github.com/atishp04/kvmtool/tree/sscofpmf
It also requires Ssaia ISA extension to be present in the hardware in order to
get perf sampling support in the guest. In Qemu virt machine, it can be done
by the following config.
```
-cpu rv64,sscofpmf=true,x-ssaia=true
```
There is no other dependencies on AIA apart from that. Thus, Ssaia must be disabled
for the guest if AIA patches are not available. Here is the example command.
```
./lkvm-static run -m 256 -c2 --console serial -p "console=ttyS0 earlycon" --disable-ssaia -k ./Image --debug
```
The series has been tested only in Qemu.
Here is the snippet of the perf running inside a kvm guest.
===================================================
$ perf record -e cycles -e instructions perf bench sched messaging -g 5
...
$ Running 'sched/messaging' benchmark:
...
[ 45.928723] perf_duration_warn: 2 callbacks suppressed
[ 45.929000] perf: interrupt took too long (484426 > 483186), lowering kernel.perf_event_max_sample_rate to 250
$ 20 sender and receiver processes per group
$ 5 groups == 200 processes run
Total time: 14.220 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.117 MB perf.data (1942 samples) ]
$ perf report --stdio
$ To display the perf.data header info, please use --header/--header-only optio>
$
$
$ Total Lost Samples: 0
$
$ Samples: 943 of event 'cycles'
$ Event count (approx.): 5128976844
$
$ Overhead Command Shared Object Symbol >
$ ........ ............... ........................... .....................>
$
7.59% sched-messaging [kernel.kallsyms] [k] memcpy
5.48% sched-messaging [kernel.kallsyms] [k] percpu_counter_ad>
5.24% sched-messaging [kernel.kallsyms] [k] __sbi_rfence_v02_>
4.00% sched-messaging [kernel.kallsyms] [k] _raw_spin_unlock_>
3.79% sched-messaging [kernel.kallsyms] [k] set_pte_range
3.72% sched-messaging [kernel.kallsyms] [k] next_uptodate_fol>
3.46% sched-messaging [kernel.kallsyms] [k] filemap_map_pages
3.31% sched-messaging [kernel.kallsyms] [k] handle_mm_fault
3.20% sched-messaging [kernel.kallsyms] [k] finish_task_switc>
3.16% sched-messaging [kernel.kallsyms] [k] clear_page
3.03% sched-messaging [kernel.kallsyms] [k] mtree_range_walk
2.42% sched-messaging [kernel.kallsyms] [k] flush_icache_pte
===================================================
[1] https://github.com/riscv-non-isa/riscv-sbi-doc
Changes from v6->v7:
1. Used SBI_SHMEM_DISABLE in the driver.
2. Added RB Tags.
3. Improved the sbi_pmu_test commandline to allow disabling multiple
tests.
Changes from v5->v6:
1. Added a patch for command line option for the sbi pmu tests.
2. Removed redundant prints and restructure the code little bit.
3. Added a patch for computing the sbi minor version correctly.
4. Addressed all other comments on v5.
Changes from v4->v5:
1. Moved sbi related definitions to its own header file from processor.h
2. Added few helper functions for selftests.
3. Improved firmware counter read and RV32 start/stop functions.
4. Converted all the shifting operations to use BIT macro
5. Addressed all other comments on v4.
Changes from v3->v4:
1. Added selftests.
2. Fixed an issue to clear the interrupt pending bits.
3. Fixed the counter index in snapshot memory start function.
Changes from v2->v3:
1. Fixed a patchwork warning on patch6.
2. Fixed a comment formatting & nit fix in PATCH 3 & 5.
3. Moved the hvien update and sscofpmf enabling to PATCH 9 from PATCH 8.
Changes from v1->v2:
1. Fixed warning/errors from patchwork CI.
2. Rebased on top of kvm-next.
3. Added Acked-by tags.
Changes from RFC->v1:
1. Addressed all the comments on RFC series.
2. Removed PATCH2 and merged into later patches.
3. Added 2 more patches for minor fixes.
4. Fixed KVM boot issue without Ssaia and made sscofpmf in guest dependent on
Ssaia in the host.
Atish Patra (24):
RISC-V: Fix the typo in Scountovf CSR name
RISC-V: Add FIRMWARE_READ_HI definition
drivers/perf: riscv: Read upper bits of a firmware counter
drivers/perf: riscv: Use BIT macro for shifting operations
RISC-V: Add SBI PMU snapshot definitions
RISC-V: KVM: Rename the SBI_STA_SHMEM_DISABLE to a generic name
RISC-V: Use the minor version mask while computing sbi version
drivers/perf: riscv: Implement SBI PMU snapshot function
drivers/perf: riscv: Fix counter mask iteration for RV32
RISC-V: KVM: Fix the initial sample period value
RISC-V: KVM: No need to update the counter value during reset
RISC-V: KVM: No need to exit to the user space if perf event failed
RISC-V: KVM: Implement SBI PMU Snapshot feature
RISC-V: KVM: Add perf sampling support for guests
RISC-V: KVM: Support 64 bit firmware counters on RV32
RISC-V: KVM: Improve firmware counter read function
KVM: riscv: selftests: Move sbi definitions to its own header file
KVM: riscv: selftests: Add helper functions for extension checks
KVM: riscv: selftests: Add Sscofpmf to get-reg-list test
KVM: riscv: selftests: Add SBI PMU extension definitions
KVM: riscv: selftests: Add SBI PMU selftest
KVM: riscv: selftests: Add a test for PMU snapshot functionality
KVM: riscv: selftests: Add a test for counter overflow
KVM: riscv: selftests: Add commandline option for SBI PMU test
arch/riscv/include/asm/csr.h | 5 +-
arch/riscv/include/asm/kvm_vcpu_pmu.h | 16 +-
arch/riscv/include/asm/sbi.h | 38 +-
arch/riscv/include/uapi/asm/kvm.h | 1 +
arch/riscv/kernel/paravirt.c | 6 +-
arch/riscv/kvm/aia.c | 5 +
arch/riscv/kvm/vcpu.c | 15 +-
arch/riscv/kvm/vcpu_onereg.c | 6 +
arch/riscv/kvm/vcpu_pmu.c | 260 ++++++-
arch/riscv/kvm/vcpu_sbi_pmu.c | 17 +-
arch/riscv/kvm/vcpu_sbi_sta.c | 4 +-
drivers/perf/riscv_pmu.c | 1 +
drivers/perf/riscv_pmu_sbi.c | 272 ++++++-
include/linux/perf/riscv_pmu.h | 6 +
tools/testing/selftests/kvm/Makefile | 1 +
.../selftests/kvm/include/riscv/processor.h | 49 +-
.../testing/selftests/kvm/include/riscv/sbi.h | 141 ++++
.../selftests/kvm/include/riscv/ucall.h | 1 +
.../selftests/kvm/lib/riscv/processor.c | 12 +
.../testing/selftests/kvm/riscv/arch_timer.c | 2 +-
.../selftests/kvm/riscv/get-reg-list.c | 4 +
.../selftests/kvm/riscv/sbi_pmu_test.c | 681 ++++++++++++++++++
tools/testing/selftests/kvm/steal_time.c | 4 +-
23 files changed, 1433 insertions(+), 114 deletions(-)
create mode 100644 tools/testing/selftests/kvm/include/riscv/sbi.h
create mode 100644 tools/testing/selftests/kvm/riscv/sbi_pmu_test.c
--
2.34.1
More information about the linux-riscv
mailing list