[PATCH] of: property: Add fw_devlink support for interrupt-map property
Anup Patel
apatel at ventanamicro.com
Fri Apr 12 04:29:31 PDT 2024
Some of the PCI controllers (such as generic PCI host controller)
use "interrupt-map" DT property to describe the mapping between
PCI endpoints and PCI interrupt pins.
Currently, there is no fw_devlink created based on "interrupt-map"
DT property so interrupt controller is not guaranteed to be probed
before PCI host controller. This mainly affects RISC-V platforms
where both PCI host controller and interrupt controllers are probed
as regular platform devices.
This creates fw_devlink between consumers (PCI host controller) and
supplier (interrupt controller) based on "interrupt-map" DT property.
Signed-off-by: Anup Patel <apatel at ventanamicro.com>
---
drivers/of/property.c | 53 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/of/property.c b/drivers/of/property.c
index a6358ee99b74..ccbbb651a89a 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1311,6 +1311,58 @@ static struct device_node *parse_interrupts(struct device_node *np,
return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
}
+static struct device_node *parse_interrupt_map(struct device_node *np,
+ const char *prop_name, int index)
+{
+ struct device_node *tn, *ipar, *supnp = NULL;
+ u32 addrcells, intcells, cells;
+ const __be32 *imap, *imap_end;
+ int i, imaplen;
+
+ if (!IS_ENABLED(CONFIG_OF_IRQ))
+ return NULL;
+
+ if (strcmp(prop_name, "interrupt-map"))
+ return NULL;
+
+ ipar = of_node_get(np);
+ do {
+ if (!of_property_read_u32(ipar, "#interrupt-cells", &intcells))
+ break;
+ tn = ipar;
+ ipar = of_irq_find_parent(ipar);
+ of_node_put(tn);
+ } while (ipar);
+ if (!ipar)
+ return NULL;
+ addrcells = of_bus_n_addr_cells(ipar);
+ of_node_put(ipar);
+
+ imap = of_get_property(np, "interrupt-map", &imaplen);
+ if (!imap || imaplen <= (addrcells + intcells))
+ return NULL;
+ imap_end = imap + imaplen;
+
+ for (i = 0; i <= index && imap < imap_end; i++) {
+ if (supnp)
+ of_node_put(supnp);
+
+ imap += addrcells;
+ imap += intcells;
+
+ supnp = of_find_node_by_phandle(be32_to_cpu(imap[0]));
+ if (!supnp)
+ return NULL;
+ imap += 1;
+
+ if (of_property_read_u32(supnp, "#interrupt-cells", &cells))
+ return NULL;
+ imap += cells;
+ }
+
+ return supnp;
+}
+
static struct device_node *parse_remote_endpoint(struct device_node *np,
const char *prop_name,
int index)
@@ -1359,6 +1411,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
{ .parse_prop = parse_msi_parent, },
{ .parse_prop = parse_gpio_compat, },
{ .parse_prop = parse_interrupts, },
+ { .parse_prop = parse_interrupt_map, },
{ .parse_prop = parse_regulators, },
{ .parse_prop = parse_gpio, },
{ .parse_prop = parse_gpios, },
--
2.34.1
More information about the linux-riscv
mailing list