[PATCH v1 3/5] firmware: microchip: clarify that sizes and addresses are in hex
Conor Dooley
conor at kernel.org
Wed Apr 10 04:58:06 PDT 2024
From: Conor Dooley <conor.dooley at microchip.com>
As it says on the tin. It can be kinda confusing when "22830" is in hex,
so prefix the hex numbers with a "0x".
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
drivers/firmware/microchip/mpfs-auto-update.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c
index 298ad21e139b..078ff328f261 100644
--- a/drivers/firmware/microchip/mpfs-auto-update.c
+++ b/drivers/firmware/microchip/mpfs-auto-update.c
@@ -279,7 +279,7 @@ static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv
AUTO_UPDATE_DIRECTORY_WIDTH);
memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH);
- dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n",
+ dev_info(priv->dev, "Writing the image address (0x%x) to the flash directory (0x%llx)\n",
image_address, directory_address);
ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer);
@@ -342,7 +342,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
erase.len = round_up(size, (size_t)priv->flash->erasesize);
erase.addr = image_address;
- dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address);
+ dev_info(priv->dev, "Erasing the flash at address (0x%x)\n", image_address);
ret = mtd_erase(priv->flash, &erase);
if (ret)
goto out;
@@ -352,7 +352,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
* will do all of that itself - including verifying that the bitstream
* is valid.
*/
- dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address);
+ dev_info(priv->dev, "Writing the image to the flash at address (0x%x)\n", image_address);
ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data);
if (ret)
goto out;
--
2.43.0
More information about the linux-riscv
mailing list