[PATCH v4 2/2] riscv: dts: starfive: visionfive-2: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz

[Xingyu Wu]

CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz.
But now PLL0 rate is 1GHz and the cpu frequency loads become
333/500/500/1000MHz in fact.

So PLL0 rate should be default set to 1.5GHz and set the
cpu_core rate to 500MHz in safe.

Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC")
Signed-off-by: Xingyu Wu <xingyu.wu at starfivetech.com>
---
 .../boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi     | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 45b58b6f3df8..28981b267de4 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -390,6 +390,12 @@ spi_dev0: spi at 0 {
 	};
 };
 
+&syscrg {
+	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
+			  <&pllclk JH7110_PLLCLK_PLL0_OUT>;
+	assigned-clock-rates = <500000000>, <1500000000>;
+};
+
 &sysgpio {
 	i2c0_pins: i2c0-0 {
 		i2c-pins {
-- 
2.25.1