[PATCH v2 2/6] ACPI: RISCV: Add NUMA support based on SRAT and SLIT
Sunil V L
sunilvl at ventanamicro.com
Mon Apr 1 00:06:38 PDT 2024
On Thu, Mar 07, 2024 at 04:47:54PM +0800, Haibo Xu wrote:
> Add acpi_numa.c file to enable parse NUMA information from
> ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and
> memory nodes to proximity domain mapping, while SLIT table
> provide the distance metrics between proximity domains.
>
> Signed-off-by: Haibo Xu <haibo1.xu at intel.com>
> ---
> arch/riscv/include/asm/acpi.h | 15 +++-
> arch/riscv/kernel/Makefile | 1 +
> arch/riscv/kernel/acpi.c | 5 --
> arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++
> arch/riscv/kernel/setup.c | 4 +-
> arch/riscv/kernel/smpboot.c | 2 -
> include/linux/acpi.h | 6 ++
> 7 files changed, 154 insertions(+), 10 deletions(-)
> create mode 100644 arch/riscv/kernel/acpi_numa.c
>
> diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
> index 7dad0cf9d701..e0a1f84404f3 100644
> --- a/arch/riscv/include/asm/acpi.h
> +++ b/arch/riscv/include/asm/acpi.h
> @@ -61,11 +61,14 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) { }
>
> void acpi_init_rintc_map(void);
> struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu);
> -u32 get_acpi_id_for_cpu(int cpu);
> +static inline u32 get_acpi_id_for_cpu(int cpu)
> +{
> + return acpi_cpu_get_madt_rintc(cpu)->uid;
> +}
> +
> int acpi_get_riscv_isa(struct acpi_table_header *table,
> unsigned int cpu, const char **isa);
>
> -static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
> void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size,
> u32 *cboz_size, u32 *cbop_size);
> #else
> @@ -87,4 +90,12 @@ static inline void acpi_get_cbo_block_size(struct acpi_table_header *table,
>
> #endif /* CONFIG_ACPI */
>
> +#ifdef CONFIG_ACPI_NUMA
> +int acpi_numa_get_nid(unsigned int cpu);
> +void acpi_map_cpus_to_nodes(void);
> +#else
> +static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
> +static inline void acpi_map_cpus_to_nodes(void) { }
> +#endif /* CONFIG_ACPI_NUMA */
> +
> #endif /*_ASM_ACPI_H*/
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index f71910718053..5d3e9cf89b76 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -105,3 +105,4 @@ obj-$(CONFIG_COMPAT) += compat_vdso/
>
> obj-$(CONFIG_64BIT) += pi/
> obj-$(CONFIG_ACPI) += acpi.o
> +obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o
> diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
> index e619edc8b0cc..040bdbfea2b4 100644
> --- a/arch/riscv/kernel/acpi.c
> +++ b/arch/riscv/kernel/acpi.c
> @@ -191,11 +191,6 @@ struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu)
> return &cpu_madt_rintc[cpu];
> }
>
> -u32 get_acpi_id_for_cpu(int cpu)
> -{
> - return acpi_cpu_get_madt_rintc(cpu)->uid;
> -}
> -
> /*
> * __acpi_map_table() will be called before paging_init(), so early_ioremap()
> * or early_memremap() should be called here to for ACPI table mapping.
> diff --git a/arch/riscv/kernel/acpi_numa.c b/arch/riscv/kernel/acpi_numa.c
> new file mode 100644
> index 000000000000..0231482d6946
> --- /dev/null
> +++ b/arch/riscv/kernel/acpi_numa.c
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ACPI 6.6 based NUMA setup for RISCV
> + * Lots of code was borrowed from arch/arm64/kernel/acpi_numa.c
> + *
> + * Copyright 2004 Andi Kleen, SuSE Labs.
> + * Copyright (C) 2013-2016, Linaro Ltd.
> + * Author: Hanjun Guo <hanjun.guo at linaro.org>
> + * Copyright (C) 2024 Intel Corporation.
> + *
> + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
> + *
> + * Called from acpi_numa_init while reading the SRAT and SLIT tables.
> + * Assumes all memory regions belonging to a single proximity domain
> + * are in one chunk. Holes between them will be included in the node.
> + */
> +
> +#define pr_fmt(fmt) "ACPI: NUMA: " fmt
> +
> +#include <linux/acpi.h>
> +#include <linux/bitmap.h>
> +#include <linux/kernel.h>
> +#include <linux/mm.h>
> +#include <linux/memblock.h>
> +#include <linux/mmzone.h>
> +#include <linux/module.h>
> +#include <linux/topology.h>
> +
> +#include <asm/numa.h>
> +
> +static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE };
> +
> +int __init acpi_numa_get_nid(unsigned int cpu)
> +{
> + return acpi_early_node_map[cpu];
> +}
> +
> +static inline int get_cpu_for_acpi_id(u32 uid)
> +{
> + int cpu;
> +
> + for (cpu = 0; cpu < nr_cpu_ids; cpu++)
> + if (uid == get_acpi_id_for_cpu(cpu))
> + return cpu;
> +
> + return -EINVAL;
> +}
> +
> +static int __init acpi_parse_rintc_pxm(union acpi_subtable_headers *header,
> + const unsigned long end)
> +{
> + struct acpi_srat_rintc_affinity *pa;
> + int cpu, pxm, node;
> +
> + if (srat_disabled())
> + return -EINVAL;
> +
> + pa = (struct acpi_srat_rintc_affinity *)header;
> + if (!pa)
> + return -EINVAL;
> +
> + if (!(pa->flags & ACPI_SRAT_RINTC_ENABLED))
> + return 0;
> +
> + pxm = pa->proximity_domain;
> + node = pxm_to_node(pxm);
> +
> + /*
> + * If we can't map the UID to a logical cpu this
> + * means that the UID is not part of possible cpus
> + * so we do not need a NUMA mapping for it, skip
> + * the SRAT entry and keep parsing.
> + */
> + cpu = get_cpu_for_acpi_id(pa->acpi_processor_uid);
> + if (cpu < 0)
> + return 0;
> +
> + acpi_early_node_map[cpu] = node;
> + pr_info("SRAT: PXM %d -> HARTID 0x%lx -> Node %d\n", pxm,
> + cpuid_to_hartid_map(cpu), node);
> +
> + return 0;
> +}
> +
> +void __init acpi_map_cpus_to_nodes(void)
> +{
> + int i;
> +
> + /*
> + * In ACPI, SMP and CPU NUMA information is provided in separate
> + * static tables, namely the MADT and the SRAT.
> + *
> + * Thus, it is simpler to first create the cpu logical map through
> + * an MADT walk and then map the logical cpus to their node ids
> + * as separate steps.
> + */
> + acpi_table_parse_entries(ACPI_SIG_SRAT, sizeof(struct acpi_table_srat),
> + ACPI_SRAT_TYPE_RINTC_AFFINITY, acpi_parse_rintc_pxm, 0);
> +
> + for (i = 0; i < nr_cpu_ids; i++)
> + early_map_cpu_to_node(i, acpi_numa_get_nid(i));
> +}
> +
> +/* Callback for Proximity Domain -> logical node ID mapping */
> +void __init acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa)
> +{
> + int pxm, node;
> +
> + if (srat_disabled())
> + return;
> +
> + if (pa->header.length < sizeof(struct acpi_srat_rintc_affinity)) {
> + pr_err("SRAT: Invalid SRAT header length: %d\n", pa->header.length);
> + bad_srat();
> + return;
> + }
> +
> + if (!(pa->flags & ACPI_SRAT_RINTC_ENABLED))
> + return;
> +
> + pxm = pa->proximity_domain;
> + node = acpi_map_pxm_to_node(pxm);
> +
> + if (node == NUMA_NO_NODE) {
> + pr_err("SRAT: Too many proximity domains %d\n", pxm);
> + bad_srat();
> + return;
> + }
> +
> + node_set(node, numa_nodes_parsed);
> +}
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index 4f73c0ae44b2..a2cde65b69e9 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -281,8 +281,10 @@ void __init setup_arch(char **cmdline_p)
> setup_smp();
> #endif
>
> - if (!acpi_disabled)
> + if (!acpi_disabled) {
> acpi_init_rintc_map();
> + acpi_map_cpus_to_nodes();
> + }
>
> riscv_init_cbo_blocksizes();
> riscv_fill_hwcap();
> diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
> index cfbe4b840d42..81a2aa77680c 100644
> --- a/arch/riscv/kernel/smpboot.c
> +++ b/arch/riscv/kernel/smpboot.c
> @@ -100,7 +100,6 @@ static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const un
> if (hart == cpuid_to_hartid_map(0)) {
> BUG_ON(found_boot_cpu);
> found_boot_cpu = true;
> - early_map_cpu_to_node(0, acpi_numa_get_nid(cpu_count));
> return 0;
> }
>
> @@ -110,7 +109,6 @@ static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const un
> }
>
> cpuid_to_hartid_map(cpu_count) = hart;
> - early_map_cpu_to_node(cpu_count, acpi_numa_get_nid(cpu_count));
> cpu_count++;
>
> return 0;
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index b7165e52b3c6..f74c62956e07 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -269,6 +269,12 @@ acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
>
> int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
>
> +#ifdef CONFIG_RISCV
> +void acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa);
> +#else
> +static inline void acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa) { }
> +#endif
> +
> #ifndef PHYS_CPUID_INVALID
> typedef u32 phys_cpuid_t;
> #define PHYS_CPUID_INVALID (phys_cpuid_t)(-1)
> --
This is a large patch spanning across multiple files. Can we split this
into multiple smaller patches? Changes look fine to me though.
Reviewed-by: Sunil V L <sunilvl at ventanamicro.com>
More information about the linux-riscv
mailing list