[PATCH 4/5] riscv: dts: sophgo: add initial CV1800B SoC device tree

[Inochi Amaoto]

Hi, Jisheng

You add the clint dt-bindings of CV1800B clint, but I don't see the clint
node in this dt. The SBI needs this clint node to provide timer for linux.
AFAIK, the dt of SBI comes from the linux or the bootloader, and bootloader
may load the linux dt and pass it to the SBI. I think it is better to add
the clint node.

In addition, please separate the peripheral node to a different file, which
can be reused by both the CV1800 series and CV1810 series.

Thanks,
Inochi

>
>Add initial device tree for the CV1800B RISC-V SoC by SOPHGO.
>
>Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
>---
> arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 117 ++++++++++++++++++++++++
> 1 file changed, 117 insertions(+)
> create mode 100644 arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>
>diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>new file mode 100644
>index 000000000000..8829bebaa017
>--- /dev/null
>+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>@@ -0,0 +1,117 @@
>+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>+/*
>+ * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
>+ */
>+
>+#include <dt-bindings/interrupt-controller/irq.h>
>+
>+/ {
>+	compatible = "sophgo,cv1800b";
>+	#address-cells = <1>;
>+	#size-cells = <1>;
>+
>+	cpus: cpus {
>+		#address-cells = <1>;
>+		#size-cells = <0>;
>+		timebase-frequency = <25000000>;
>+
>+		cpu0: cpu at 0 {
>+			compatible = "thead,c906", "riscv";
>+			device_type = "cpu";
>+			reg = <0>;
>+			d-cache-block-size = <64>;
>+			d-cache-sets = <512>;
>+			d-cache-size = <65536>;
>+			i-cache-block-size = <64>;
>+			i-cache-sets = <128>;
>+			i-cache-size = <32768>;
>+			mmu-type = "riscv,sv39";
>+			riscv,isa = "rv64imafdc";
>+			riscv,isa-base = "rv64i";
>+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
>+					       "zifencei", "zihpm";
>+
>+			cpu0_intc: interrupt-controller {
>+				compatible = "riscv,cpu-intc";
>+				interrupt-controller;
>+				#address-cells = <0>;
>+				#interrupt-cells = <1>;
>+			};
>+		};
>+	};
>+
>+	osc: oscillator {
>+		compatible = "fixed-clock";
>+		clock-output-names = "osc_25m";
>+		#clock-cells = <0>;
>+	};
>+
>+	soc {
>+		compatible = "simple-bus";
>+		interrupt-parent = <&plic>;
>+		#address-cells = <1>;
>+		#size-cells = <1>;
>+		dma-noncoherent;
>+		ranges;
>+
>+		uart0: serial at 04140000 {
>+			compatible = "snps,dw-apb-uart";
>+			reg = <0x04140000 0x100>;
>+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
>+			clocks = <&osc>;
>+			reg-shift = <2>;
>+			reg-io-width = <4>;
>+			status = "disabled";
>+		};
>+
>+		uart1: serial at 04150000 {
>+			compatible = "snps,dw-apb-uart";
>+			reg = <0x04150000 0x100>;
>+			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
>+			clocks = <&osc>;
>+			reg-shift = <2>;
>+			reg-io-width = <4>;
>+			status = "disabled";
>+		};
>+
>+		uart2: serial at 04160000 {
>+			compatible = "snps,dw-apb-uart";
>+			reg = <0x04160000 0x100>;
>+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
>+			clocks = <&osc>;
>+			reg-shift = <2>;
>+			reg-io-width = <4>;
>+			status = "disabled";
>+		};
>+
>+		uart3: serial at 04170000 {
>+			compatible = "snps,dw-apb-uart";
>+			reg = <0x04170000 0x100>;
>+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
>+			clocks = <&osc>;
>+			reg-shift = <2>;
>+			reg-io-width = <4>;
>+			status = "disabled";
>+		};
>+
>+		uart4: serial at 041c0000 {
>+			compatible = "snps,dw-apb-uart";
>+			reg = <0x041c0000 0x100>;
>+			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
>+			clocks = <&osc>;
>+			reg-shift = <2>;
>+			reg-io-width = <4>;
>+			status = "disabled";
>+		};
>+
>+		plic: interrupt-controller at 70000000 {
>+			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
>+			reg = <0x70000000 0x4000000>;
>+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
>+			interrupt-controller;
>+			#address-cells = <0>;
>+			#interrupt-cells = <2>;
>+			riscv,ndev = <101>;
>+		};
>+	};
>+};
>--
>2.40.1
>
>