[RFC PATCH v12 07/33] KVM: Add KVM_EXIT_MEMORY_FAULT exit to report faults to userspace
Xiaoyao Li
xiaoyao.li at intel.com
Thu Sep 21 23:03:23 PDT 2023
On 9/14/2023 9:55 AM, Sean Christopherson wrote:
> From: Chao Peng <chao.p.peng at linux.intel.com>
>
> Add a new KVM exit type to allow userspace to handle memory faults that
> KVM cannot resolve, but that userspace *may* be able to handle (without
> terminating the guest).
>
> KVM will initially use KVM_EXIT_MEMORY_FAULT to report implicit
> conversions between private and shared memory. With guest private memory,
> there will be two kind of memory conversions:
>
> - explicit conversion: happens when the guest explicitly calls into KVM
> to map a range (as private or shared)
>
> - implicit conversion: happens when the guest attempts to access a gfn
> that is configured in the "wrong" state (private vs. shared)
>
> On x86 (first architecture to support guest private memory), explicit
> conversions will be reported via KVM_EXIT_HYPERCALL+KVM_HC_MAP_GPA_RANGE,
side topic.
Do we expect to integrate TDVMCALL(MAPGPA) of TDX into KVM_HC_MAP_GPA_RANGE?
> but reporting KVM_EXIT_HYPERCALL for implicit conversions is undesriable
> as there is (obviously) no hypercall, and there is no guarantee that the
> guest actually intends to convert between private and shared, i.e. what
> KVM thinks is an implicit conversion "request" could actually be the
> result of a guest code bug.
>
> KVM_EXIT_MEMORY_FAULT will be used to report memory faults that appear to
> be implicit conversions.
>
> Place "struct memory_fault" in a second anonymous union so that filling
> memory_fault doesn't clobber state from other yet-to-be-fulfilled exits,
> and to provide additional information if KVM does NOT ultimately exit to
> userspace with KVM_EXIT_MEMORY_FAULT, e.g. if KVM suppresses (or worse,
> loses) the exit, as KVM often suppresses exits for memory failures that
> occur when accessing paravirt data structures. The initial usage for
> private memory will be all-or-nothing, but other features such as the
> proposed "userfault on missing mappings" support will use
> KVM_EXIT_MEMORY_FAULT for potentially _all_ guest memory accesses, i.e.
> will run afoul of KVM's various quirks.
So when exit reason is KVM_EXIT_MEMORY_FAULT, how can we tell which
field in the first union is valid?
When exit reason is not KVM_EXIT_MEMORY_FAULT, how can we know the info
in the second union run.memory is valid without a run.memory.valid field?
> Use bit 3 for flagging private memory so that KVM can use bits 0-2 for
> capturing RWX behavior if/when userspace needs such information.
>
> Note! To allow for future possibilities where KVM reports
> KVM_EXIT_MEMORY_FAULT and fills run->memory_fault on _any_ unresolved
> fault, KVM returns "-EFAULT" (-1 with errno == EFAULT from userspace's
> perspective), not '0'! Due to historical baggage within KVM, exiting to
> userspace with '0' from deep callstacks, e.g. in emulation paths, is
> infeasible as doing so would require a near-complete overhaul of KVM,
> whereas KVM already propagates -errno return codes to userspace even when
> the -errno originated in a low level helper.
>
> Link: https://lore.kernel.org/all/20230908222905.1321305-5-amoorthy@google.com
> Cc: Anish Moorthy <amoorthy at google.com>
> Suggested-by: Sean Christopherson <seanjc at google.com>
> Co-developed-by: Yu Zhang <yu.c.zhang at linux.intel.com>
> Signed-off-by: Yu Zhang <yu.c.zhang at linux.intel.com>
> Signed-off-by: Chao Peng <chao.p.peng at linux.intel.com>
> Co-developed-by: Sean Christopherson <seanjc at google.com>
> Signed-off-by: Sean Christopherson <seanjc at google.com>
> ---
> Documentation/virt/kvm/api.rst | 24 ++++++++++++++++++++++++
> include/linux/kvm_host.h | 15 +++++++++++++++
> include/uapi/linux/kvm.h | 24 ++++++++++++++++++++++++
> 3 files changed, 63 insertions(+)
>
> diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> index 21a7578142a1..e28a13439a95 100644
> --- a/Documentation/virt/kvm/api.rst
> +++ b/Documentation/virt/kvm/api.rst
> @@ -6702,6 +6702,30 @@ array field represents return values. The userspace should update the return
> values of SBI call before resuming the VCPU. For more details on RISC-V SBI
> spec refer, https://github.com/riscv/riscv-sbi-doc.
>
> +::
> +
> + /* KVM_EXIT_MEMORY_FAULT */
> + struct {
> + #define KVM_MEMORY_EXIT_FLAG_PRIVATE (1ULL << 3)
> + __u64 flags;
> + __u64 gpa;
> + __u64 size;
> + } memory;
> +
> +KVM_EXIT_MEMORY_FAULT indicates the vCPU has encountered a memory fault that
> +could not be resolved by KVM. The 'gpa' and 'size' (in bytes) describe the
> +guest physical address range [gpa, gpa + size) of the fault. The 'flags' field
> +describes properties of the faulting access that are likely pertinent:
> +
> + - KVM_MEMORY_EXIT_FLAG_PRIVATE - When set, indicates the memory fault occurred
> + on a private memory access. When clear, indicates the fault occurred on a
> + shared access.
> +
> +Note! KVM_EXIT_MEMORY_FAULT is unique among all KVM exit reasons in that it
> +accompanies a return code of '-1', not '0'! errno will always be set to EFAULT
> +or EHWPOISON when KVM exits with KVM_EXIT_MEMORY_FAULT, userspace should assume
> +kvm_run.exit_reason is stale/undefined for all other error numbers.
> +
Initially, this section is the copy of struct kvm_run and had comments
for each field accordingly. Unfortunately, the consistence has not been
well maintained during the new filed being added.
Do we expect to fix it?
> ::
>
> /* KVM_EXIT_NOTIFY */
> diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> index 4e741ff27af3..d8c6ce6c8211 100644
> --- a/include/linux/kvm_host.h
> +++ b/include/linux/kvm_host.h
> @@ -2327,4 +2327,19 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr)
> /* Max number of entries allowed for each kvm dirty ring */
> #define KVM_DIRTY_RING_MAX_ENTRIES 65536
>
> +static inline void kvm_prepare_memory_fault_exit(struct kvm_vcpu *vcpu,
> + gpa_t gpa, gpa_t size,
> + bool is_write, bool is_exec,
> + bool is_private)
> +{
> + vcpu->run->exit_reason = KVM_EXIT_MEMORY_FAULT;
> + vcpu->run->memory_fault.gpa = gpa;
> + vcpu->run->memory_fault.size = size;
> +
> + /* RWX flags are not (yet) defined or communicated to userspace. */
> + vcpu->run->memory_fault.flags = 0;
> + if (is_private)
> + vcpu->run->memory_fault.flags |= KVM_MEMORY_EXIT_FLAG_PRIVATE;
> +}
> +
> #endif
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index bd1abe067f28..d2d913acf0df 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -274,6 +274,7 @@ struct kvm_xen_exit {
> #define KVM_EXIT_RISCV_SBI 35
> #define KVM_EXIT_RISCV_CSR 36
> #define KVM_EXIT_NOTIFY 37
> +#define KVM_EXIT_MEMORY_FAULT 38
>
> /* For KVM_EXIT_INTERNAL_ERROR */
> /* Emulate instruction failed. */
> @@ -541,6 +542,29 @@ struct kvm_run {
> struct kvm_sync_regs regs;
> char padding[SYNC_REGS_SIZE_BYTES];
> } s;
> +
> + /*
> + * This second exit union holds structs for exit types which may be
> + * triggered after KVM has already initiated a different exit, or which
> + * may be ultimately dropped by KVM.
> + *
> + * For example, because of limitations in KVM's uAPI, KVM x86 can
> + * generate a memory fault exit an MMIO exit is initiated (exit_reason
> + * and kvm_run.mmio are filled). And conversely, KVM often disables
> + * paravirt features if a memory fault occurs when accessing paravirt
> + * data instead of reporting the error to userspace.
> + */
> + union {
> + /* KVM_EXIT_MEMORY_FAULT */
> + struct {
> +#define KVM_MEMORY_EXIT_FLAG_PRIVATE (1ULL << 3)
> + __u64 flags;
> + __u64 gpa;
> + __u64 size;
> + } memory_fault;
> + /* Fix the size of the union. */
> + char padding2[256];
> + };
> };
>
> /* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
More information about the linux-riscv
mailing list