[PATCH v2 06/11] dt-bindings: timer: Add Sophgo sg2042 clint

[Conor Dooley]

On Thu, Sep 21, 2023 at 08:43:47AM +0800, Inochi Amaoto wrote:

> >>>> but not one. In another word, there is no need to defined mtimer and ipi
> >>>> device on the same base address.
> >>>
> >>> There's also no need to have two compatibles for the same interrupt
> >>> controller, so I do not get this reasoning. What actually _requires_
> >>> them to be split?
> >>>
> >>
> >> Yes, it is one, but can be mapped into different address. So I think we
> >> need two.
> >
> >Not two compatibles though, just two memory addresses that you need to
> >locate (or maybe even 3, for SSWI?)
> >
> 
> We may need four (mtime, mtimecmp, mswi, sswi) if use register range.

Why would you need 4? The first two certainly could be individual
reg entries, no?

> Anyway, I will use a vendor spec implementation as a temporary solution.
> I hope this will be corrected in a predictable future, and we can use a
> standard way to resolve this at that time. :)

If the spec doesn't get frozen, there'll not be a standard way merged.
Hopefully not too many others go off an implement non-frozen specs, and
we will not really need to worry all that much about it.

Cheers,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230921/132a4e4f/attachment.sig>