[RFC PATCH v2 32/35] ACPI: add support to register CPUs based on the _STA enabled bit

[Gavin Shan]

On 9/14/23 02:38, James Morse wrote:
> acpi_processor_get_info() registers all present CPUs. Registering a
> CPU is what creates the sysfs entries and triggers the udev
> notifications.
> 
> arm64 virtual machines that support 'virtual cpu hotplug' use the
> enabled bit to indicate whether the CPU can be brought online, as
> the existing ACPI tables require all hardware to be described and
> present.
> 
> If firmware describes a CPU as present, but disabled, skip the
> registration. Such CPUs are present, but can't be brought online for
> whatever reason. (e.g. firmware/hypervisor policy).
> 
> Once firmware sets the enabled bit, the CPU can be registered and
> brought online by user-space. Online CPUs, or CPUs that are missing
> an _STA method must always be registered.
> 
> Signed-off-by: James Morse <james.morse at arm.com>
> ---
>   drivers/acpi/acpi_processor.c | 31 ++++++++++++++++++++++++++++++-
>   1 file changed, 30 insertions(+), 1 deletion(-)
> 

With below nits addressed:

Reviewed-by: Gavin Shan <gshan at redhat.com>

> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index b67616079751..b49859eab01a 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -227,6 +227,32 @@ static int acpi_processor_make_present(struct acpi_processor *pr)
>   	return ret;
>   }
>   
> +static int acpi_processor_make_enabled(struct acpi_processor *pr)
> +{
> +	unsigned long long sta;
> +	acpi_status status;
> +	bool present, enabled;
> +
> +	if (!acpi_has_method(pr->handle, "_STA"))
> +		return arch_register_cpu(pr->id);
> +
> +	status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta);
> +	if (ACPI_FAILURE(status))
> +		return -ENODEV;
> +
> +	present = sta & ACPI_STA_DEVICE_PRESENT;
> +	enabled = sta & ACPI_STA_DEVICE_ENABLED;
> +
> +	if (cpu_online(pr->id) && (!present || !enabled)) {
> +		pr_err_once(FW_BUG "CPU %u is online, but described as not present or disabled!\n", pr->id);
> +		add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> +	} else if (!present || !enabled) {
> +		return -ENODEV;
> +	}
> +
> +	return arch_register_cpu(pr->id);
> +}
> +

The message needs to be split up into multiple lines to make ./scripts/checkpatch.pl
happy:

	pr_err_once(FW_BUG "CPU %u is online, but described "
			   "as not present or disabled!\n", pr->id);

>   static int acpi_processor_get_info(struct acpi_device *device)
>   {
>   	union acpi_object object = { 0 };
> @@ -318,7 +344,7 @@ static int acpi_processor_get_info(struct acpi_device *device)
>   	 */
>   	if (!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) &&
>   	    !get_cpu_device(pr->id)) {
> -		int ret = arch_register_cpu(pr->id);
> +		int ret = acpi_processor_make_enabled(pr);
>   
>   		if (ret)
>   			return ret;
> @@ -526,6 +552,9 @@ static void acpi_processor_post_eject(struct acpi_device *device)
>   		acpi_processor_make_not_present(device);
>   		return;
>   	}
> +
> +	if (cpu_present(pr->id) && !(sta & ACPI_STA_DEVICE_ENABLED))
> +		arch_unregister_cpu(pr->id);
>   }
>   
>   #ifdef CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC

Thanks,
Gavin