[RFC PATCH v2 16/35] ACPI: processor: Register CPUs that are online, but not described in the DSDT
Gavin Shan
gshan at redhat.com
Sun Sep 17 22:12:06 PDT 2023
On 9/14/23 02:38, James Morse wrote:
> ACPI has two descriptions of CPUs, one in the MADT/APIC table, the other
> in the DSDT. Both are required. (ACPI 6.5's 8.4 "Declaring Processors"
> says "Each processor in the system must be declared in the ACPI
> namespace"). Having two descriptions allows firmware authors to get
> this wrong.
>
> If CPUs are described in the MADT/APIC, they will be brought online
> early during boot. Once the register_cpu() calls are moved to ACPI,
> they will be based on the DSDT description of the CPUs. When CPUs are
> missing from the DSDT description, they will end up online, but not
> registered.
>
> Add a helper that runs after acpi_init() has completed to register
> CPUs that are online, but weren't found in the DSDT. Any CPU that
> is registered by this code triggers a firmware-bug warning and kernel
> taint.
>
> Qemu TCG only describes the first CPU in the DSDT, unless cpu-hotplug
> is configured.
>
> Signed-off-by: James Morse <james.morse at arm.com>
> ---
> drivers/acpi/acpi_processor.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
Reviewed-by: Gavin Shan <gshan at redhat.com>
> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index b4bde78121bb..a01e315aa16a 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -790,6 +790,25 @@ void __init acpi_processor_init(void)
> acpi_pcc_cpufreq_init();
> }
>
> +static int __init acpi_processor_register_missing_cpus(void)
> +{
> + int cpu;
> +
> + if (acpi_disabled)
> + return 0;
> +
> + for_each_online_cpu(cpu) {
> + if (!get_cpu_device(cpu)) {
> + pr_err_once(FW_BUG "CPU %u has no ACPI namespace description!\n", cpu);
> + add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> + arch_register_cpu(cpu);
> + }
> + }
> +
> + return 0;
> +}
> +subsys_initcall_sync(acpi_processor_register_missing_cpus);
> +
> #ifdef CONFIG_ACPI_PROCESSOR_CSTATE
> /**
> * acpi_processor_claim_cst_control - Request _CST control from the platform.
More information about the linux-riscv
mailing list