[PATCH 10/12] serial: 8250_dw: Add Sophgo SG2042 support

Emil Renner Berthing emil.renner.berthing at canonical.com
Fri Sep 15 03:02:45 PDT 2023


Krzysztof Kozlowski wrote:
> On 15/09/2023 09:25, Wang Chen wrote:
> > From: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> >
> > Add quirk to skip setting the input clock rate for the uarts on the
> > Sophgo SG2042 SoC similar to the StarFive JH7100.
> >
> > Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
>
> Missing SoB.
>
> > ---
> >  drivers/tty/serial/8250/8250_dw.c | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> > index f4cafca1a7da..6c344877a07f 100644
> > --- a/drivers/tty/serial/8250/8250_dw.c
> > +++ b/drivers/tty/serial/8250/8250_dw.c
> > @@ -770,7 +770,7 @@ static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
> >  	.quirks = DW_UART_QUIRK_IS_DMA_FC,
> >  };
> >
> > -static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
> > +static const struct dw8250_platform_data dw8250_skip_set_rate_data = {
>
> Why? What is wrong with old name?
>
> >  	.usr_reg = DW_UART_USR,
> >  	.quirks = DW_UART_QUIRK_SKIP_SET_RATE,
> >  };
> > @@ -780,7 +780,8 @@ static const struct of_device_id dw8250_of_match[] = {
> >  	{ .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data },
> >  	{ .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data },
> >  	{ .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data },
> > -	{ .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data },
> > +	{ .compatible = "sophgo,sg2042-uart", .data = &dw8250_skip_set_rate_data },
> > +	{ .compatible = "starfive,jh7100-uart", .data = &dw8250_skip_set_rate_data },
>
> So devices are fully compatible? Then use compatibility and drop this
> patch entirely.

I'm fine with this, but these are two different companies and SoCs that just
happens to have both implemented the Designware UART with an inflexible input
clock. So if fx. a real quirk is found on the JH7110 then we'd need to either
change the compatible on an unrelated SoC or change compatible on the JH7110 to
something like "starfive,jh7100-uart-with-quirk" and "starfive,jh7100-uart" will
forever be a quirky way to spell "dw8250 with inflexible input clock".
Is that how device trees are supposed to work?

/Emil
>
> Best regards,
> Krzysztof
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv



More information about the linux-riscv mailing list