[RFC PATCH v2 02/35] drivers: base: Use present CPUs in GENERIC_CPU_DEVICES
James Morse
james.morse at arm.com
Wed Sep 13 09:37:50 PDT 2023
Three of the five ACPI architectures create sysfs entries using
register_cpu() for present CPUs, whereas arm64, riscv and all
GENERIC_CPU_DEVICES do this for possible CPUs.
Registering a CPU is what causes them to show up in sysfs.
It makes very little sense to register all possible CPUs. Registering
a CPU is what triggers the udev notifications allowing user-space to
react to newly added CPUs.
To allow all five ACPI architectures to use GENERIC_CPU_DEVICES, change
it to use for_each_present_cpu(). Making the ACPI architectures use
GENERIC_CPU_DEVICES is a pre-requisite step to centralise their
cpu_register() logic, before moving it into the ACPI processor driver.
When ACPI is disabled this work would be done by
cpu_dev_register_generic().
Of the ACPI architectures that register possible CPUs, arm64 and riscv
do not support making possible CPUs present as they use the weak 'always
fails' version of arch_register_cpu().
Only two of the eight architectures that use GENERIC_CPU_DEVICES have a
distinction between present and possible CPUs.
The following architectures use GENERIC_CPU_DEVICES but are not SMP,
so possible == present:
* m68k
* microblaze
* nios2
The following architectures use GENERIC_CPU_DEVICES and consider
possible == present:
* csky: setup_smp()
* parisc: smp_prepare_boot_cpu() marks the boot cpu as present,
processor_probe() sets possible for all CPUs and present for all CPUs
except the boot cpu.
um appears to be a subarchitecture of x86.
The remaining architecture using GENERIC_CPU_DEVICES are:
* openrisc and hexagon:
where smp_init_cpus() makes all CPUs < NR_CPUS possible,
whereas smp_prepare_cpus() only makes CPUs < setup_max_cpus present.
After this change, openrisc and hexagon systems that use the max_cpus
command line argument would not see the other CPUs present in sysfs.
This should not be a problem as these CPUs can't bre brought online as
_cpu_up() checks cpu_present().
After this change, only CPUs which are present appear in sysfs.
Signed-off-by: James Morse <james.morse at arm.com>
---
drivers/base/cpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 9ea22e165acd..34b48f660b6b 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -533,7 +533,7 @@ static void __init cpu_dev_register_generic(void)
#ifdef CONFIG_GENERIC_CPU_DEVICES
int i;
- for_each_possible_cpu(i) {
+ for_each_present_cpu(i) {
if (register_cpu(&per_cpu(cpu_devices, i), i))
panic("Failed to register CPU device");
}
--
2.39.2
More information about the linux-riscv
mailing list