(subset) [PATCH v2 0/5] Add I2S support for the StarFive JH7110 SoC

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

On Mon, 21 Aug 2023 22:41:46 +0800, Xingyu Wu wrote:
> This patch series adds I2S support for the StarFive JH7110 RISC-V
> SoC based on Designware I2S controller. There has three I2S channels
> (RX/TX0/TX1) on the JH7110 SoC, one of which is for record(RX) and
> two for playback(TX).
> 
> The first patch adds support for the StarFive JH7110 SoC in the
> Designware I2S bindings.
> The second patch adds the ops to get data from platform bus in the
> I2S driver.
> The third patch adds support for the StarFive JH7110 SoC in
> the Designware I2S driver.
> The fourth patch fixes the name of I2STX1 pinmux.
> The last patch adds device node of I2S RX/TX0/TX1 in JH7110 dts.
> 
> [...]

Applied to riscv-dt-for-next, thanks!

[4/5] riscv: dts: starfive: pinfunc: Fix the pins name of I2STX1
      https://git.kernel.org/conor/c/4e1abae5688a
[5/5] riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1
      https://git.kernel.org/conor/c/92cfc35838b2

Thanks,
Conor.