[PATCH 1/3] dt-bindings: mmc: Remove properties from required

[Emil Renner Berthing]

William Qiu wrote:
> Due to the change of tuning implementation, it's no longer necessary to
> use the "starfive,sysreg" property in dts, so remove it from required.

nit: again the device tree should be a description of the hardware, so the
justification here shouldn't be that the Linux driver doesn't use the field,
but that it turns out the registers aren't required for the peripheral to work
properly. Don't respin the series just for this though.

Reviewed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>

> Signed-off-by: William Qiu <william.qiu at starfivetech.com>
> ---
>  Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml | 2 --
>  1 file changed, 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
> index 51e1b04e799f..553a75195c2e 100644
> --- a/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
> @@ -55,7 +55,6 @@ required:
>    - clocks
>    - clock-names
>    - interrupts
> -  - starfive,sysreg
>
>  unevaluatedProperties: false
>
> @@ -73,5 +72,4 @@ examples:
>          fifo-depth = <32>;
>          fifo-watermark-aligned;
>          data-addr = <0>;
> -        starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>;
>      };
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv