[PATCH net-next v2 0/3] add the dwmac driver for T-HEAD TH1520 SoC

Jiexun Wang wangjiexun at tinylab.org
Sun Sep 3 22:41:00 PDT 2023


On Sun, Aug 27, 2023 at 05:17:09PM +0800, Jisheng Zhang wrote:
>Add the dwmac driver support for T-HEAD TH1520 SoC.
>
>Since the clk part isn't mainlined, so SoC dts(i) changes are not
>included in this series. However, it can be tested by using fixed-clock.
>
>Since v1:
>  - rebase on the lastest net-next
>  - collect Reviewed-by tag
>  - address Krzysztof's comment of the dt binding
>  - fix "div is not initialised" issue pointed out by Simon
>
>Jisheng Zhang (3):
>  dt-bindings: net: snps,dwmac: allow dwmac-3.70a to set pbl properties
>  dt-bindings: net: add T-HEAD dwmac support
>  net: stmmac: add glue layer for T-HEAD TH1520 SoC
>
> .../devicetree/bindings/net/snps,dwmac.yaml   |   2 +
> .../devicetree/bindings/net/thead,dwmac.yaml  |  77 +++++
> drivers/net/ethernet/stmicro/stmmac/Kconfig   |  11 +
> drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
> .../net/ethernet/stmicro/stmmac/dwmac-thead.c | 302 ++++++++++++++++++
> 5 files changed, 393 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/thead,dwmac.yaml

I would like to try this patch on my LicheePi 4A board, 
but I don't know how to modify the dts file.
Could you please share your modifications to the dts file?
Thank you very much.

Best regards,
Jiexun Wang



More information about the linux-riscv mailing list