[PATCH v2 08/12] riscv: dts: starfive: Add pool for coherent DMA memory on JH7100 boards
Cristian Ciocaltea
cristian.ciocaltea at collabora.com
Tue Oct 31 12:16:24 PDT 2023
On 10/31/23 16:40, Emil Renner Berthing wrote:
> Cristian Ciocaltea wrote:
>> From: Emil Renner Berthing <emil.renner.berthing at canonical.com>
>>
>> The StarFive JH7100 SoC has non-coherent device DMAs, but most drivers
>> expect to be able to allocate coherent memory for DMA descriptors and
>> such. However on the JH7100 DDR memory appears twice in the physical
>> memory map, once cached and once uncached:
>>
>> 0x00_8000_0000 - 0x08_7fff_ffff : Off chip DDR memory, cached
>> 0x10_0000_0000 - 0x17_ffff_ffff : Off chip DDR memory, uncached
>>
>> To use this uncached region we create a global DMA memory pool there and
>> reserve the corresponding area in the cached region.
>>
>> However the uncached region is fully above the 32bit address limit, so add
>> a dma-ranges map so the DMA address used for peripherals is still in the
>> regular cached region below the limit.
>
> Adding these nodes to the device tree won't actually do anything without
> enabling CONFIG_DMA_GLOBAL_POOL as is done here:
>
> https://github.com/esmil/linux/commit/e14ad9ff67fd51dcc76415d4cc7f3a30ffcba379
Should I pick this up for v3 or maybe it would be better to be handled
as part of your ccache series?
Thanks,
Cristian
>>
>> Link: https://github.com/starfive-tech/JH7100_Docs/blob/main/JH7100%20Data%20Sheet%20V01.01.04-EN%20(4-21-2021).pdf
>> Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
>> ---
>> .../boot/dts/starfive/jh7100-common.dtsi | 24 +++++++++++++++++++
>> 1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
>> index b93ce351a90f..504c73f01f14 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
>> @@ -39,6 +39,30 @@ led-ack {
>> label = "ack";
>> };
>> };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + dma-reserved {
>> + reg = <0x0 0xfa000000 0x0 0x1000000>;
>> + no-map;
>> + };
>> +
>> + linux,dma {
>> + compatible = "shared-dma-pool";
>> + reg = <0x10 0x7a000000 0x0 0x1000000>;
>> + no-map;
>> + linux,dma-default;
>> + };
>> + };
>> +
>> + soc {
>> + dma-ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x7a000000>,
>> + <0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>,
>> + <0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>;
>> + };
>> };
>>
>> &gpio {
>> --
>> 2.42.0
>>
More information about the linux-riscv
mailing list