[PATCH v11 08/14] irqchip/riscv-imsic: Add support for platform MSI irqdomain
Anup Patel
apatel at ventanamicro.com
Mon Oct 23 10:27:54 PDT 2023
The Linux platform MSI support requires a platform MSI irqdomain so
let us add a platform irqchip driver for RISC-V IMSIC which provides
a base IRQ domain and platform MSI domain. This driver assumes that
the IMSIC state is already initialized by the IMSIC early driver.
Signed-off-by: Anup Patel <apatel at ventanamicro.com>
---
drivers/irqchip/Makefile | 2 +-
drivers/irqchip/irq-riscv-imsic-platform.c | 309 +++++++++++++++++++++
2 files changed, 310 insertions(+), 1 deletion(-)
create mode 100644 drivers/irqchip/irq-riscv-imsic-platform.c
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index d714724387ce..abca445a3229 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -95,7 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o
obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
-obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o
+obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
new file mode 100644
index 000000000000..23d286cb017e
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "riscv-imsic: " fmt
+#include <linux/bitmap.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+
+#include "irq-riscv-imsic-state.h"
+
+static int imsic_cpu_page_phys(unsigned int cpu,
+ unsigned int guest_index,
+ phys_addr_t *out_msi_pa)
+{
+ struct imsic_global_config *global;
+ struct imsic_local_config *local;
+
+ global = &imsic->global;
+ local = per_cpu_ptr(global->local, cpu);
+
+ if (BIT(global->guest_index_bits) <= guest_index)
+ return -EINVAL;
+
+ if (out_msi_pa)
+ *out_msi_pa = local->msi_pa +
+ (guest_index * IMSIC_MMIO_PAGE_SZ);
+
+ return 0;
+}
+
+static void imsic_irq_mask(struct irq_data *d)
+{
+ imsic_vector_mask(irq_data_get_irq_chip_data(d));
+}
+
+static void imsic_irq_unmask(struct irq_data *d)
+{
+ imsic_vector_unmask(irq_data_get_irq_chip_data(d));
+}
+
+static void imsic_irq_compose_vector_msg(struct imsic_vector *vec,
+ struct msi_msg *msg)
+{
+ phys_addr_t msi_addr;
+ int err;
+
+ if (WARN_ON(vec == NULL))
+ return;
+
+ err = imsic_cpu_page_phys(vec->cpu, 0, &msi_addr);
+ if (WARN_ON(err))
+ return;
+
+ msg->address_hi = upper_32_bits(msi_addr);
+ msg->address_lo = lower_32_bits(msi_addr);
+ msg->data = IMSIC_VECTOR_BASE_LOCAL_ID(vec);
+}
+
+static void imsic_irq_compose_msg(struct irq_data *d, struct msi_msg *msg)
+{
+ imsic_irq_compose_vector_msg(irq_data_get_irq_chip_data(d), msg);
+}
+
+#ifdef CONFIG_SMP
+static void imsic_msi_update_msg(struct irq_data *d, struct imsic_vector *vec)
+{
+ struct msi_msg msg[2] = { [1] = { }, };
+
+ imsic_irq_compose_vector_msg(vec, msg);
+ irq_data_get_irq_chip(d)->irq_write_msi_msg(d, msg);
+}
+
+static int imsic_irq_set_affinity(struct irq_data *d,
+ const struct cpumask *mask_val,
+ bool force)
+{
+ struct imsic_vector *old_vec, *new_vec;
+ struct irq_data *pd = d->parent_data;
+ unsigned int i, virq, hwirq;
+
+ old_vec = irq_data_get_irq_chip_data(pd);
+ if (WARN_ON(old_vec == NULL))
+ return -ENOENT;
+
+ /* Find-out base virq, hwirq and order of the old vector */
+ hwirq = IMSIC_VECTOR_BASE_HWIRQ(old_vec);
+ virq = pd->irq - (old_vec->hwirq - hwirq);
+
+ /* Ensure old vector points to the first entry */
+ if (old_vec->hwirq != hwirq) {
+ pd = irq_domain_get_irq_data(imsic->base_domain, virq);
+ old_vec = irq_data_get_irq_chip_data(pd);
+ }
+
+ /* Get a new vector on the desired set of CPUs */
+ new_vec = imsic_vector_alloc(hwirq, mask_val, old_vec->order);
+ if (!new_vec)
+ return -ENOSPC;
+
+ /* If old vector belongs to the desired CPU then do nothing */
+ if (old_vec->cpu == new_vec->cpu) {
+ imsic_vector_free(new_vec);
+ return IRQ_SET_MASK_OK_DONE;
+ }
+
+ /* Point device to the new vector */
+ imsic_msi_update_msg(d, new_vec);
+
+ /* Update irq descriptors */
+ for (i = 0; i < BIT(old_vec->order); i++) {
+ pd = irq_domain_get_irq_data(imsic->base_domain, virq + i);
+
+ /* Save the new vector entry in irq descriptor*/
+ pd->chip_data = new_vec + i;
+
+ /* Update effective affinity of parent irq data */
+ irq_data_update_effective_affinity(pd,
+ cpumask_of(new_vec->cpu));
+ }
+
+ /* Move state of the old vector to the new vector */
+ imsic_vector_move(old_vec, new_vec);
+
+ return IRQ_SET_MASK_OK_DONE;
+}
+#endif
+
+static struct irq_chip imsic_irq_base_chip = {
+ .name = "IMSIC-BASE",
+ .irq_mask = imsic_irq_mask,
+ .irq_unmask = imsic_irq_unmask,
+ .irq_compose_msi_msg = imsic_irq_compose_msg,
+ .flags = IRQCHIP_SKIP_SET_WAKE |
+ IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static int imsic_irq_domain_alloc(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs,
+ void *args)
+{
+ struct imsic_vector *vec;
+ int i, hwirq;
+
+ hwirq = imsic_hwirqs_alloc(get_count_order(nr_irqs));
+ if (hwirq < 0)
+ return hwirq;
+
+ vec = imsic_vector_alloc(hwirq, cpu_online_mask,
+ get_count_order(nr_irqs));
+ if (!vec) {
+ imsic_hwirqs_free(hwirq, get_count_order(nr_irqs));
+ return -ENOSPC;
+ }
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_domain_set_info(domain, virq + i, hwirq + i,
+ &imsic_irq_base_chip, vec + i,
+ handle_simple_irq, NULL, NULL);
+ irq_set_noprobe(virq + i);
+ irq_set_affinity(virq + i, cpu_online_mask);
+ /*
+ * IMSIC does not implement irq_disable() so Linux interrupt
+ * subsystem will take a lazy approach for disabling an IMSIC
+ * interrupt. This means IMSIC interrupts are left unmasked
+ * upon system suspend and interrupts are not processed
+ * immediately upon system wake up. To tackle this, we disable
+ * the lazy approach for all IMSIC interrupts.
+ */
+ irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY);
+ }
+
+ return 0;
+}
+
+static void imsic_irq_domain_free(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+
+ imsic_vector_free(irq_data_get_irq_chip_data(d));
+ imsic_hwirqs_free(d->hwirq, get_count_order(nr_irqs));
+ irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
+static void imsic_irq_debug_show(struct seq_file *m, struct irq_domain *d,
+ struct irq_data *irqd, int ind)
+{
+ if (!irqd) {
+ imsic_vector_debug_show_summary(m, ind);
+ return;
+ }
+
+ imsic_vector_debug_show(m, irq_data_get_irq_chip_data(irqd), ind);
+}
+#endif
+
+static const struct irq_domain_ops imsic_base_domain_ops = {
+ .alloc = imsic_irq_domain_alloc,
+ .free = imsic_irq_domain_free,
+#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
+ .debug_show = imsic_irq_debug_show,
+#endif
+};
+
+static struct irq_chip imsic_plat_irq_chip = {
+ .name = "IMSIC-PLAT",
+#ifdef CONFIG_SMP
+ .irq_set_affinity = imsic_irq_set_affinity,
+#endif
+};
+
+static struct msi_domain_ops imsic_plat_domain_ops = {
+};
+
+static struct msi_domain_info imsic_plat_domain_info = {
+ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
+ .ops = &imsic_plat_domain_ops,
+ .chip = &imsic_plat_irq_chip,
+};
+
+static int imsic_irq_domains_init(struct fwnode_handle *fwnode)
+{
+ /* Create Base IRQ domain */
+ imsic->base_domain = irq_domain_create_tree(fwnode,
+ &imsic_base_domain_ops, imsic);
+ if (!imsic->base_domain) {
+ pr_err("%pfwP: failed to create IMSIC base domain\n",
+ fwnode);
+ return -ENOMEM;
+ }
+ irq_domain_update_bus_token(imsic->base_domain, DOMAIN_BUS_NEXUS);
+
+ /* Create Platform MSI domain */
+ imsic->plat_domain = platform_msi_create_irq_domain(fwnode,
+ &imsic_plat_domain_info,
+ imsic->base_domain);
+ if (!imsic->plat_domain) {
+ pr_err("%pfwP: failed to create IMSIC platform domain\n",
+ fwnode);
+ irq_domain_remove(imsic->base_domain);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int imsic_platform_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct imsic_global_config *global;
+ int rc;
+
+ if (!imsic) {
+ dev_err(dev, "early driver not probed\n");
+ return -ENODEV;
+ }
+
+ if (imsic->base_domain) {
+ dev_err(dev, "irq domain already created\n");
+ return -ENODEV;
+ }
+
+ global = &imsic->global;
+
+ /* Initialize IRQ and MSI domains */
+ rc = imsic_irq_domains_init(dev->fwnode);
+ if (rc) {
+ dev_err(dev, "failed to initialize IRQ and MSI domains\n");
+ return rc;
+ }
+
+ dev_info(dev, " hart-index-bits: %d, guest-index-bits: %d\n",
+ global->hart_index_bits, global->guest_index_bits);
+ dev_info(dev, " group-index-bits: %d, group-index-shift: %d\n",
+ global->group_index_bits, global->group_index_shift);
+ dev_info(dev, " per-CPU IDs %d at base PPN %pa\n",
+ global->nr_ids, &global->base_addr);
+ dev_info(dev, " total %d interrupts available\n",
+ imsic->nr_hwirqs);
+
+ return 0;
+}
+
+static const struct of_device_id imsic_platform_match[] = {
+ { .compatible = "riscv,imsics" },
+ {}
+};
+
+static struct platform_driver imsic_platform_driver = {
+ .driver = {
+ .name = "riscv-imsic",
+ .of_match_table = imsic_platform_match,
+ },
+ .probe = imsic_platform_probe,
+};
+builtin_platform_driver(imsic_platform_driver);
--
2.34.1
More information about the linux-riscv
mailing list