[PATCH v2 6/7] riscv: dts: thead: Enable BeagleV Ahead eMMC controller
Drew Fustini
dfustini at baylibre.com
Wed Oct 18 10:59:43 PDT 2023
On Wed, Oct 18, 2023 at 02:57:50PM +0100, Conor Dooley wrote:
> On Tue, Oct 17, 2023 at 01:43:52PM -0700, Drew Fustini wrote:
> > Add properties to the emmc node and enable it and set the frequency for
> > the sdhci clock.
> >
> > Signed-off-by: Drew Fustini <dfustini at baylibre.com>
> > ---
> > arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> > index 70e8042c8304..bf55319ba950 100644
> > --- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> > +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> > @@ -52,6 +52,10 @@ &uart_sclk {
> > clock-frequency = <100000000>;
> > };
> >
> > +&sdhci_clk {
> > + clock-frequency = <198000000>;
> > +};
> > +
> > &dmac0 {
> > status = "okay";
> > };
> > @@ -59,3 +63,13 @@ &dmac0 {
> > &uart0 {
> > status = "okay";
> > };
> > +
> > +&mmc0 {
> > + bus-width = <8>;
> > + max-frequency = <198000000>;
> > + mmc-hs400-1_8v;
> > + non-removable;
> > + no-sdio;
> > + no-sd;
> > + status = "okay";
> > +};
>
> Is this file meant to be in alphanumerical order?
>
Good point, I should add the new nodes in alphabetical order.
Thanks,
Drew
More information about the linux-riscv
mailing list