[PATCH v4 -next 3/4] RISC-V: ACPI: RHCT: Add function to get CBO block sizes
Sunil V L
sunilvl at ventanamicro.com
Wed Oct 18 05:40:06 PDT 2023
Cache Block Operation (CBO) related block size in ACPI is provided by RHCT.
Add support to read the CMO node in RHCT to get this information.
Signed-off-by: Sunil V L <sunilvl at ventanamicro.com>
Reviewed-by: Andrew Jones <ajones at ventanamicro.com>
---
arch/riscv/include/asm/acpi.h | 6 +++
drivers/acpi/riscv/rhct.c | 87 +++++++++++++++++++++++++++++++++++
2 files changed, 93 insertions(+)
diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
index d5604d2073bc..7dad0cf9d701 100644
--- a/arch/riscv/include/asm/acpi.h
+++ b/arch/riscv/include/asm/acpi.h
@@ -66,6 +66,8 @@ int acpi_get_riscv_isa(struct acpi_table_header *table,
unsigned int cpu, const char **isa);
static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
+void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size,
+ u32 *cboz_size, u32 *cbop_size);
#else
static inline void acpi_init_rintc_map(void) { }
static inline struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu)
@@ -79,6 +81,10 @@ static inline int acpi_get_riscv_isa(struct acpi_table_header *table,
return -EINVAL;
}
+static inline void acpi_get_cbo_block_size(struct acpi_table_header *table,
+ u32 *cbom_size, u32 *cboz_size,
+ u32 *cbop_size) { }
+
#endif /* CONFIG_ACPI */
#endif /*_ASM_ACPI_H*/
diff --git a/drivers/acpi/riscv/rhct.c b/drivers/acpi/riscv/rhct.c
index 489b0e93b1e5..caa2c16e1697 100644
--- a/drivers/acpi/riscv/rhct.c
+++ b/drivers/acpi/riscv/rhct.c
@@ -8,6 +8,7 @@
#define pr_fmt(fmt) "ACPI: RHCT: " fmt
#include <linux/acpi.h>
+#include <linux/bits.h>
static struct acpi_table_rhct *acpi_get_rhct(void)
{
@@ -81,3 +82,89 @@ int acpi_get_riscv_isa(struct acpi_table_header *table, unsigned int cpu, const
return -1;
}
+
+static void acpi_parse_hart_info_cmo_node(struct acpi_table_rhct *rhct,
+ struct acpi_rhct_hart_info *hart_info,
+ u32 *cbom_size, u32 *cboz_size, u32 *cbop_size)
+{
+ u32 size_hartinfo = sizeof(struct acpi_rhct_hart_info);
+ u32 size_hdr = sizeof(struct acpi_rhct_node_header);
+ struct acpi_rhct_node_header *ref_node;
+ struct acpi_rhct_cmo_node *cmo_node;
+ u32 *hart_info_node_offset;
+
+ hart_info_node_offset = ACPI_ADD_PTR(u32, hart_info, size_hartinfo);
+ for (int i = 0; i < hart_info->num_offsets; i++) {
+ ref_node = ACPI_ADD_PTR(struct acpi_rhct_node_header,
+ rhct, hart_info_node_offset[i]);
+ if (ref_node->type == ACPI_RHCT_NODE_TYPE_CMO) {
+ cmo_node = ACPI_ADD_PTR(struct acpi_rhct_cmo_node,
+ ref_node, size_hdr);
+ if (cbom_size && cmo_node->cbom_size <= 30) {
+ if (!*cbom_size)
+ *cbom_size = BIT(cmo_node->cbom_size);
+ else if (*cbom_size != BIT(cmo_node->cbom_size))
+ pr_warn("CBOM size is not the same across harts\n");
+ }
+
+ if (cboz_size && cmo_node->cboz_size <= 30) {
+ if (!*cboz_size)
+ *cboz_size = BIT(cmo_node->cboz_size);
+ else if (*cboz_size != BIT(cmo_node->cboz_size))
+ pr_warn("CBOZ size is not the same across harts\n");
+ }
+
+ if (cbop_size && cmo_node->cbop_size <= 30) {
+ if (!*cbop_size)
+ *cbop_size = BIT(cmo_node->cbop_size);
+ else if (*cbop_size != BIT(cmo_node->cbop_size))
+ pr_warn("CBOP size is not the same across harts\n");
+ }
+ }
+ }
+}
+
+/*
+ * During early boot, the caller should call acpi_get_table() and pass its pointer to
+ * these functions (and free up later). At run time, since this table can be used
+ * multiple times, pass NULL so that the table remains in memory.
+ */
+void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size,
+ u32 *cboz_size, u32 *cbop_size)
+{
+ u32 size_hdr = sizeof(struct acpi_rhct_node_header);
+ struct acpi_rhct_node_header *node, *end;
+ struct acpi_rhct_hart_info *hart_info;
+ struct acpi_table_rhct *rhct;
+
+ if (acpi_disabled)
+ return;
+
+ if (table) {
+ rhct = (struct acpi_table_rhct *)table;
+ } else {
+ rhct = acpi_get_rhct();
+ if (!rhct)
+ return;
+ }
+
+ if (cbom_size)
+ *cbom_size = 0;
+
+ if (cboz_size)
+ *cboz_size = 0;
+
+ if (cbop_size)
+ *cbop_size = 0;
+
+ end = ACPI_ADD_PTR(struct acpi_rhct_node_header, rhct, rhct->header.length);
+ for (node = ACPI_ADD_PTR(struct acpi_rhct_node_header, rhct, rhct->node_offset);
+ node < end;
+ node = ACPI_ADD_PTR(struct acpi_rhct_node_header, node, node->length)) {
+ if (node->type == ACPI_RHCT_NODE_TYPE_HART_INFO) {
+ hart_info = ACPI_ADD_PTR(struct acpi_rhct_hart_info, node, size_hdr);
+ acpi_parse_hart_info_cmo_node(rhct, hart_info, cbom_size,
+ cboz_size, cbop_size);
+ }
+ }
+}
--
2.39.2
More information about the linux-riscv
mailing list