[PATCH v6 2/3] clocksource: Add JH7110 timer driver
Xingyu Wu
xingyu.wu at starfivetech.com
Fri Oct 13 02:34:51 PDT 2023
On 2023/10/13 1:53, Christophe JAILLET wrote:
> Le 12/10/2023 à 10:10, Xingyu Wu a écrit :
>> Add timer driver for the StarFive JH7110 SoC.
>>
>> Signed-off-by: Xingyu Wu <xingyu.wu-bONrM45KWFOXmMXjJBpWqg at public.gmane.org>
>
> ...
It looks normal in my email and the web. Is this due to some settings?
>
>> +static int jh7110_timer_probe(struct platform_device *pdev)
>> +{
>> + struct jh7110_clkevt *clkevt[JH7110_TIMER_CH_MAX];
>> + char name[4];
>> + struct clk *pclk;
>> + struct reset_control *rst;
>> + int ch;
>> + int ret;
>> + void __iomem *base;
>> +
>> + base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(base))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(base),
>> + "failed to map registers\n");
>> +
>> + rst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
>> + if (IS_ERR(rst))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get apb reset\n");
>> +
>> + pclk = devm_clk_get_enabled(&pdev->dev, "apb");
>> + if (IS_ERR(pclk))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
>> + "failed to get & enable apb clock\n");
>> +
>> + ret = reset_control_deassert(rst);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "failed to deassert apb reset\n");
>
> Hi,
>
> I'm not very familiar with the reset_control_[de]assert() functions, but shouldn't this be undone by a reset_control_assert() call if an error occurs later?
In this case, the reset controller is set from 'assert' state to 'deassert' state. If it is failed and still 'assert' state, I don't think it need to call reset_control_assert().
>
>> +
>> + for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
>> + clkevt[ch] = devm_kzalloc(&pdev->dev, sizeof(*clkevt[ch]), GFP_KERNEL);
>> + if (!clkevt[ch])
>> + return -ENOMEM;
>> +
>> + snprintf(name, sizeof(name), "ch%d", ch);
>> +
>> + clkevt[ch]->base = base + JH7110_TIMER_CH_BASE(ch);
>> + /* Ensure timer is disabled */
>> + jh7110_timer_disable(clkevt[ch]);
>> +
>> + rst = devm_reset_control_get_exclusive(&pdev->dev, name);
>> + if (IS_ERR(rst))
>> + return PTR_ERR(rst);
>> +
>> + clkevt[ch]->clk = devm_clk_get_enabled(&pdev->dev, name);
>> + if (IS_ERR(clkevt[ch]->clk))
>> + return PTR_ERR(clkevt[ch]->clk);
>> +
>> + ret = reset_control_deassert(rst);
>> + if (ret)
>> + return ret;
>
> Same here.
>
>> +
>> + clkevt[ch]->evt.irq = platform_get_irq(pdev, ch);
>> + if (clkevt[ch]->evt.irq < 0)
>> + return clkevt[ch]->evt.irq;
>> +
>> + snprintf(clkevt[ch]->name, sizeof(clkevt[ch]->name), "%s.ch%d", pdev->name, ch);
>> + jh7110_clockevents_register(clkevt[ch]);
>> +
>> + ret = devm_request_irq(&pdev->dev, clkevt[ch]->evt.irq, jh7110_timer_interrupt,
>> + IRQF_TIMER | IRQF_IRQPOLL,
>> + clkevt[ch]->name, &clkevt[ch]->evt);
>> + if (ret)
>> + return ret;
>> +
>> + ret = jh7110_clocksource_init(clkevt[ch]);
>
> Does something should be done if this fails?
>
> CJ
Yes, it should be call reset_control_assert() here and I will add it in next version.
>
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id jh7110_timer_match[] = {
>> + { .compatible = "starfive,jh7110-timer", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, jh7110_timer_match);
>> +
>> +static struct platform_driver jh7110_timer_driver = {
>> + .probe = jh7110_timer_probe,
>> + .driver = {
>> + .name = "jh7110-timer",
>> + .of_match_table = jh7110_timer_match,
>> + },
>> +};
>> +module_platform_driver(jh7110_timer_driver);
>> +
>> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu-bONrM45KWFOXmMXjJBpWqg at public.gmane.org>");
>> +MODULE_DESCRIPTION("StarFive JH7110 timer driver");
>> +MODULE_LICENSE("GPL");
>
Thanks,
Xingyu Wu
More information about the linux-riscv
mailing list