[PATCH 4/5] kbuild: unify vdso_install rules
Guo Ren
guoren at kernel.org
Tue Oct 10 19:23:57 PDT 2023
On Mon, Oct 9, 2023 at 8:42 PM Masahiro Yamada <masahiroy at kernel.org> wrote:
>
> Currently, there is no standard implementation for vdso_install,
> leading to various issues:
>
> 1. Code duplication
>
> Many architectures duplicate similar code just for copying files
> to the install destination.
>
> Some architectures (arm, sparc, x86) create build-id symlinks,
> introducing more code duplication.
>
> 2. Accidental updates of in-tree build artifacts
>
> The vdso_install rule depends on the vdso files to install.
> It may update in-tree build artifacts. This can be problematic,
> as explained in commit 19514fc665ff ("arm, kbuild: make
> "make install" not depend on vmlinux").
>
> 3. Broken code in some architectures
>
> Makefile code is often copied from one architecture to another
> without proper adaptation or testing.
>
> The previous commits removed broken code from csky, UML, and parisc.
>
> Another issue is that 'make vdso_install' for ARCH=s390 installs
> vdso64, but not vdso32.
>
> To address these problems, this commit introduces the generic vdso_install.
>
> Architectures that support vdso_install need to define vdso-install-y
> in arch/*/Makefile.
>
> vdso-install-y lists the files to install. For example, arch/x86/Makefile
> looks like this:
>
> vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
> vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
> vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
> vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
>
> These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
> if exists, stripped away.
>
> vdso-install-y can optionally take the second field after the colon
> separator. This is needed because some architectures install vdso
> files as a different base name.
>
> The following is a snippet from arch/arm64/Makefile.
>
> vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
>
> This will rename vdso.so.dbg to vdso32.so during installation. If such
> architectures change their implementation so that the file names match,
> this workaround will go away.
>
> Signed-off-by: Masahiro Yamada <masahiroy at kernel.org>
> ---
>
> Makefile | 9 ++++++
> arch/arm/Makefile | 7 +---
> arch/arm/vdso/Makefile | 25 --------------
> arch/arm64/Makefile | 9 ++----
> arch/arm64/kernel/vdso/Makefile | 10 ------
> arch/arm64/kernel/vdso32/Makefile | 10 ------
> arch/loongarch/Makefile | 4 +--
> arch/loongarch/vdso/Makefile | 10 ------
> arch/riscv/Makefile | 9 ++----
> arch/riscv/kernel/compat_vdso/Makefile | 10 ------
> arch/riscv/kernel/vdso/Makefile | 10 ------
> arch/s390/Makefile | 6 ++--
> arch/s390/kernel/vdso32/Makefile | 10 ------
> arch/s390/kernel/vdso64/Makefile | 10 ------
> arch/sparc/Makefile | 5 ++-
> arch/sparc/vdso/Makefile | 27 ----------------
> arch/x86/Makefile | 7 ++--
> arch/x86/entry/vdso/Makefile | 27 ----------------
> scripts/Makefile.vdsoinst | 45 ++++++++++++++++++++++++++
> 19 files changed, 71 insertions(+), 179 deletions(-)
> create mode 100644 scripts/Makefile.vdsoinst
>
> diff --git a/Makefile b/Makefile
> index 373649c7374e..2170d56630e8 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1317,6 +1317,14 @@ scripts_unifdef: scripts_basic
> quiet_cmd_install = INSTALL $(INSTALL_PATH)
> cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh
>
> +# ---------------------------------------------------------------------------
> +# vDSO install
> +
> +PHONY += vdso_install
> +vdso_install: export INSTALL_FILES = $(vdso-install-y)
> +vdso_install:
> + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst
> +
> # ---------------------------------------------------------------------------
> # Tools
>
> @@ -1560,6 +1568,7 @@ help:
> @echo '* vmlinux - Build the bare kernel'
> @echo '* modules - Build all modules'
> @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
> + @echo ' vdso_install - Install unstripped vdso to INSTALL_MOD_PATH (default: /)'
> @echo ' dir/ - Build all files in dir and below'
> @echo ' dir/file.[ois] - Build specified target only'
> @echo ' dir/file.ll - Build the LLVM assembly file'
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 547e5856eaa0..5ba42f69f8ce 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -304,11 +304,7 @@ $(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
> $(INSTALL_TARGETS):
> $(call cmd,install)
>
> -PHONY += vdso_install
> -vdso_install:
> -ifeq ($(CONFIG_VDSO),y)
> - $(Q)$(MAKE) $(build)=arch/arm/vdso $@
> -endif
> +vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg
>
> # My testing targets (bypasses dependencies)
> bp:; $(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
> @@ -331,7 +327,6 @@ define archhelp
> echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or'
> echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
> echo ' install to $$(INSTALL_PATH) and run lilo'
> - echo ' vdso_install - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
> echo
> echo ' multi_v7_lpae_defconfig - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
> endef
> diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile
> index 515ca33b854c..d761bd2e2f40 100644
> --- a/arch/arm/vdso/Makefile
> +++ b/arch/arm/vdso/Makefile
> @@ -63,28 +63,3 @@ quiet_cmd_vdsold_and_vdso_check = LD $@
>
> quiet_cmd_vdsomunge = MUNGE $@
> cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@
> -
> -#
> -# Install the unstripped copy of vdso.so.dbg. If our toolchain
> -# supports build-id, install .build-id links as well.
> -#
> -# Cribbed from arch/x86/vdso/Makefile.
> -#
> -quiet_cmd_vdso_install = INSTALL $<
> -define cmd_vdso_install
> - cp $< "$(MODLIB)/vdso/vdso.so"; \
> - if readelf -n $< | grep -q 'Build ID'; then \
> - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \
> - first=`echo $$buildid | cut -b-2`; \
> - last=`echo $$buildid | cut -b3-`; \
> - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \
> - ln -sf "../../vdso.so" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \
> - fi
> -endef
> -
> -$(MODLIB)/vdso: FORCE
> - @mkdir -p $(MODLIB)/vdso
> -
> -PHONY += vdso_install
> -vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso
> - $(call cmd,vdso_install)
> diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
> index 2d49aea0ff67..4bd85cc0d32b 100644
> --- a/arch/arm64/Makefile
> +++ b/arch/arm64/Makefile
> @@ -169,12 +169,6 @@ install: KBUILD_IMAGE := $(boot)/Image
> install zinstall:
> $(call cmd,install)
>
> -PHONY += vdso_install
> -vdso_install:
> - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
> - $(if $(CONFIG_COMPAT_VDSO), \
> - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
> -
> archprepare:
> $(Q)$(MAKE) $(build)=arch/arm64/tools kapi
> ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
> @@ -205,6 +199,9 @@ ifdef CONFIG_COMPAT_VDSO
> endif
> endif
>
> +vdso-install-y += arch/arm64/kernel/vdso/vdso.so.dbg
> +vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
> +
> include $(srctree)/scripts/Makefile.defconf
>
> PHONY += virtconfig
> diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
> index fe7a53c6781f..8818287f1095 100644
> --- a/arch/arm64/kernel/vdso/Makefile
> +++ b/arch/arm64/kernel/vdso/Makefile
> @@ -78,13 +78,3 @@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
> # Actual build commands
> quiet_cmd_vdsold_and_vdso_check = LD $@
> cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check)
> -
> -# Install commands for the unstripped file
> -quiet_cmd_vdso_install = INSTALL $@
> - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
> -
> -vdso.so: $(obj)/vdso.so.dbg
> - @mkdir -p $(MODLIB)/vdso
> - $(call cmd,vdso_install)
> -
> -vdso_install: vdso.so
> diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
> index 2f73e5bca213..1f911a76c5af 100644
> --- a/arch/arm64/kernel/vdso32/Makefile
> +++ b/arch/arm64/kernel/vdso32/Makefile
> @@ -172,13 +172,3 @@ gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh
> quiet_cmd_vdsosym = VDSOSYM $@
> # The AArch64 nm should be able to read an AArch32 binary
> cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
> -
> -# Install commands for the unstripped file
> -quiet_cmd_vdso_install = INSTALL32 $@
> - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so
> -
> -vdso.so: $(obj)/vdso.so.dbg
> - @mkdir -p $(MODLIB)/vdso
> - $(call cmd,vdso_install)
> -
> -vdso_install: vdso.so
> diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> index fb0fada43197..b86f2ff31659 100644
> --- a/arch/loongarch/Makefile
> +++ b/arch/loongarch/Makefile
> @@ -136,9 +136,7 @@ vdso_prepare: prepare0
> $(Q)$(MAKE) $(build)=arch/loongarch/vdso include/generated/vdso-offsets.h
> endif
>
> -PHONY += vdso_install
> -vdso_install:
> - $(Q)$(MAKE) $(build)=arch/loongarch/vdso $@
> +vdso-install-y += arch/loongarch/vdso/vdso.so.dbg
>
> all: $(notdir $(KBUILD_IMAGE))
>
> diff --git a/arch/loongarch/vdso/Makefile b/arch/loongarch/vdso/Makefile
> index 5c97d1463328..c74c9921304f 100644
> --- a/arch/loongarch/vdso/Makefile
> +++ b/arch/loongarch/vdso/Makefile
> @@ -83,13 +83,3 @@ $(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE
> obj-y += vdso.o
>
> $(obj)/vdso.o : $(obj)/vdso.so
> -
> -# install commands for the unstripped file
> -quiet_cmd_vdso_install = INSTALL $@
> - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
> -
> -vdso.so: $(obj)/vdso.so.dbg
> - @mkdir -p $(MODLIB)/vdso
> - $(call cmd,vdso_install)
> -
> -vdso_install: vdso.so
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index 1329e060c548..18a47b4d6795 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -131,12 +131,6 @@ endif
> libs-y += arch/riscv/lib/
> libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
>
> -PHONY += vdso_install
> -vdso_install:
> - $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> - $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \
> - $(build)=arch/riscv/kernel/compat_vdso compat_$@)
> -
> ifeq ($(KBUILD_EXTMOD),)
> ifeq ($(CONFIG_MMU),y)
> prepare: vdso_prepare
> @@ -148,6 +142,9 @@ vdso_prepare: prepare0
> endif
> endif
>
> +vdso-install-y += arch/riscv/kernel/vdso/vdso.so.dbg
> +vdso-install-$(CONFIG_COMPAT) += arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg:../compat_vdso/compat_vdso.so
Why do we need ":../compat_vdso/compat_vdso.so" here?
> +
> ifneq ($(CONFIG_XIP_KERNEL),y)
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_ARCH_CANAAN),yy)
> KBUILD_IMAGE := $(boot)/loader.bin
> diff --git a/arch/riscv/kernel/compat_vdso/Makefile b/arch/riscv/kernel/compat_vdso/Makefile
> index b86e5e2c3aea..62fa393b2eb2 100644
> --- a/arch/riscv/kernel/compat_vdso/Makefile
> +++ b/arch/riscv/kernel/compat_vdso/Makefile
> @@ -76,13 +76,3 @@ quiet_cmd_compat_vdsold = VDSOLD $@
> # actual build commands
> quiet_cmd_compat_vdsoas = VDSOAS $@
> cmd_compat_vdsoas = $(COMPAT_CC) $(a_flags) $(COMPAT_CC_FLAGS) -c -o $@ $<
> -
> -# install commands for the unstripped file
> -quiet_cmd_compat_vdso_install = INSTALL $@
> - cmd_compat_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/compat_vdso/$@
> -
> -compat_vdso.so: $(obj)/compat_vdso.so.dbg
> - @mkdir -p $(MODLIB)/compat_vdso
> - $(call cmd,compat_vdso_install)
> -
> -compat_vdso_install: compat_vdso.so
> diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
> index 6b1dba11bf6d..e8aa7c380007 100644
> --- a/arch/riscv/kernel/vdso/Makefile
> +++ b/arch/riscv/kernel/vdso/Makefile
> @@ -73,13 +73,3 @@ quiet_cmd_vdsold = VDSOLD $@
> cmd_vdsold = $(LD) $(ld_flags) -T $(filter-out FORCE,$^) -o $@.tmp && \
> $(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \
> rm $@.tmp
> -
> -# install commands for the unstripped file
> -quiet_cmd_vdso_install = INSTALL $@
> - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
> -
> -vdso.so: $(obj)/vdso.so.dbg
> - @mkdir -p $(MODLIB)/vdso
> - $(call cmd,vdso_install)
> -
> -vdso_install: vdso.so
> diff --git a/arch/s390/Makefile b/arch/s390/Makefile
> index a53a36ee0731..73873e451686 100644
> --- a/arch/s390/Makefile
> +++ b/arch/s390/Makefile
> @@ -138,9 +138,6 @@ bzImage: vmlinux
> zfcpdump:
> $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
>
> -vdso_install:
> - $(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
> -
> archheaders:
> $(Q)$(MAKE) $(build)=$(syscalls) uapi
>
> @@ -160,6 +157,9 @@ vdso_prepare: prepare0
> $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \
> $(build)=arch/s390/kernel/vdso32 include/generated/vdso32-offsets.h)
>
> +vdso-install-y += arch/s390/kernel/vdso64/vdso64.so.dbg
> +vdso-install-$(CONFIG_COMPAT) += arch/s390/kernel/vdso32/vdso32.so.dbg
> +
> ifdef CONFIG_EXPOLINE_EXTERN
> modules_prepare: expoline_prepare
> expoline_prepare: scripts
> diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
> index 23e868b79a6c..caec7db6f966 100644
> --- a/arch/s390/kernel/vdso32/Makefile
> +++ b/arch/s390/kernel/vdso32/Makefile
> @@ -61,16 +61,6 @@ quiet_cmd_vdso32as = VDSO32A $@
> quiet_cmd_vdso32cc = VDSO32C $@
> cmd_vdso32cc = $(CC) $(c_flags) -c -o $@ $<
>
> -# install commands for the unstripped file
> -quiet_cmd_vdso_install = INSTALL $@
> - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
> -
> -vdso32.so: $(obj)/vdso32.so.dbg
> - @mkdir -p $(MODLIB)/vdso
> - $(call cmd,vdso_install)
> -
> -vdso_install: vdso32.so
> -
> # Generate VDSO offsets using helper script
> gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
> quiet_cmd_vdsosym = VDSOSYM $@
> diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
> index fc1c6ff8178f..e3c9085f8fa7 100644
> --- a/arch/s390/kernel/vdso64/Makefile
> +++ b/arch/s390/kernel/vdso64/Makefile
> @@ -70,16 +70,6 @@ quiet_cmd_vdso64as = VDSO64A $@
> quiet_cmd_vdso64cc = VDSO64C $@
> cmd_vdso64cc = $(CC) $(c_flags) -c -o $@ $<
>
> -# install commands for the unstripped file
> -quiet_cmd_vdso_install = INSTALL $@
> - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
> -
> -vdso64.so: $(obj)/vdso64.so.dbg
> - @mkdir -p $(MODLIB)/vdso
> - $(call cmd,vdso_install)
> -
> -vdso_install: vdso64.so
> -
> # Generate VDSO offsets using helper script
> gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
> quiet_cmd_vdsosym = VDSOSYM $@
> diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
> index 7417345c6639..5f6035936131 100644
> --- a/arch/sparc/Makefile
> +++ b/arch/sparc/Makefile
> @@ -76,9 +76,8 @@ install:
> archheaders:
> $(Q)$(MAKE) $(build)=arch/sparc/kernel/syscalls all
>
> -PHONY += vdso_install
> -vdso_install:
> - $(Q)$(MAKE) $(build)=arch/sparc/vdso $@
> +vdso-install-$(CONFIG_SPARC64) += arch/sparc/vdso/vdso64.so.dbg
> +vdso-install-$(CONFIG_COMPAT) += arch/sparc/vdso/vdso32.so.dbg
>
> # This is the image used for packaging
> KBUILD_IMAGE := $(boot)/zImage
> diff --git a/arch/sparc/vdso/Makefile b/arch/sparc/vdso/Makefile
> index 77d7b9032158..d08c3a0443f3 100644
> --- a/arch/sparc/vdso/Makefile
> +++ b/arch/sparc/vdso/Makefile
> @@ -116,30 +116,3 @@ quiet_cmd_vdso = VDSO $@
>
> VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 -Bsymbolic
> GCOV_PROFILE := n
> -
> -#
> -# Install the unstripped copies of vdso*.so. If our toolchain supports
> -# build-id, install .build-id links as well.
> -#
> -quiet_cmd_vdso_install = INSTALL $(@:install_%=%)
> -define cmd_vdso_install
> - cp $< "$(MODLIB)/vdso/$(@:install_%=%)"; \
> - if readelf -n $< |grep -q 'Build ID'; then \
> - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \
> - first=`echo $$buildid | cut -b-2`; \
> - last=`echo $$buildid | cut -b3-`; \
> - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \
> - ln -sf "../../$(@:install_%=%)" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \
> - fi
> -endef
> -
> -vdso_img_insttargets := $(vdso_img_sodbg:%.dbg=install_%)
> -
> -$(MODLIB)/vdso: FORCE
> - @mkdir -p $(MODLIB)/vdso
> -
> -$(vdso_img_insttargets): install_%: $(obj)/%.dbg $(MODLIB)/vdso FORCE
> - $(call cmd,vdso_install)
> -
> -PHONY += vdso_install $(vdso_img_insttargets)
> -vdso_install: $(vdso_img_insttargets) FORCE
> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> index 5bfe5caaa444..3ff53a2d4ff0 100644
> --- a/arch/x86/Makefile
> +++ b/arch/x86/Makefile
> @@ -291,9 +291,10 @@ PHONY += install
> install:
> $(call cmd,install)
>
> -PHONY += vdso_install
> -vdso_install:
> - $(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@
> +vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
> +vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
> +vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
> +vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
>
> archprepare: checkbin
> checkbin:
> diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
> index 6a1821bd7d5e..c197efd82922 100644
> --- a/arch/x86/entry/vdso/Makefile
> +++ b/arch/x86/entry/vdso/Makefile
> @@ -190,31 +190,4 @@ GCOV_PROFILE := n
> quiet_cmd_vdso_and_check = VDSO $@
> cmd_vdso_and_check = $(cmd_vdso); $(cmd_vdso_check)
>
> -#
> -# Install the unstripped copies of vdso*.so. If our toolchain supports
> -# build-id, install .build-id links as well.
> -#
> -quiet_cmd_vdso_install = INSTALL $(@:install_%=%)
> -define cmd_vdso_install
> - cp $< "$(MODLIB)/vdso/$(@:install_%=%)"; \
> - if readelf -n $< |grep -q 'Build ID'; then \
> - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \
> - first=`echo $$buildid | cut -b-2`; \
> - last=`echo $$buildid | cut -b3-`; \
> - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \
> - ln -sf "../../$(@:install_%=%)" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \
> - fi
> -endef
> -
> -vdso_img_insttargets := $(vdso_img_sodbg:%.dbg=install_%)
> -
> -$(MODLIB)/vdso: FORCE
> - @mkdir -p $(MODLIB)/vdso
> -
> -$(vdso_img_insttargets): install_%: $(obj)/%.dbg $(MODLIB)/vdso
> - $(call cmd,vdso_install)
> -
> -PHONY += vdso_install $(vdso_img_insttargets)
> -vdso_install: $(vdso_img_insttargets)
> -
> clean-files := vdso32.so vdso32.so.dbg vdso64* vdso-image-*.c vdsox32.so*
> diff --git a/scripts/Makefile.vdsoinst b/scripts/Makefile.vdsoinst
> new file mode 100644
> index 000000000000..1022d9fdd976
> --- /dev/null
> +++ b/scripts/Makefile.vdsoinst
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# ==========================================================================
> +# Install unstripped copies of vDSO
> +# ==========================================================================
> +
> +PHONY := __default
> +__default:
> + @:
> +
> +include $(srctree)/scripts/Kbuild.include
> +
> +install-dir := $(MODLIB)/vdso
> +
> +define gen_install_rules
> +
> +src := $$(firstword $$(subst :,$(space),$(1)))
> +dest := $(install-dir)/$$(or $$(word 2,$$(subst :,$(space),$(1))),$$(patsubst %.dbg,%,$$(notdir $(1))))
> +
> +__default: $$(dest)
> +$$(dest): $$(src) FORCE
> + $$(call cmd,install)
> +
> +# Some architectures create .build-id symlinks
> +ifneq ($(filter arm sparc x86, $(SRCARCH)),)
> +link := $(install-dir)/.build-id/$$(shell $(READELF) -n $$(src) | sed -n 's@^.*Build ID: \(..\)\(.*\)@\1/\2 at p')
> +
> +__default: $$(link)
> +$$(link): $$(dest) FORCE
> + $$(call cmd,symlink)
> +endif
> +
> +endef
> +
> +$(foreach x, $(sort $(INSTALL_FILES)), $(eval $(call gen_install_rules,$(x))))
> +
> +quiet_cmd_install = INSTALL $@
> + cmd_install = mkdir -p $(dir $@); cp $< $@
> +
> +quiet_cmd_symlink = SYMLINK $@
> + cmd_symlink = mkdir -p $(dir $@); ln -sf --relative $< $@
> +
> +PHONY += FORCE
> +FORCE:
> +
> +.PHONY: $(PHONY)
> --
> 2.39.2
>
--
Best Regards
Guo Ren
More information about the linux-riscv
mailing list