[PATCH 0/5] Add Huashan Pi board support

[Inochi Amaoto]

Huashan Pi board is an embedded development platform based on the
CV1812H chip. Add minimal device tree files for this board.
Currently, it can boot to a basic shell.

NOTE: this series is based on the Jisheng's Milk-V Duo patch.

Link: https://en.sophgo.com/product/introduce/huashan.html
Link: https://en.sophgo.com/product/introduce/cv181xH.html

Inochi Amaoto (5):
  dt-bindings: interrupt-controller: Add SOPHGO CV1812H plic
  dt-bindings: timer: Add SOPHGO CV1812H clint
  dt-bindings: riscv: Add SOPHGO Huashan Pi board compatibles
  riscv: dts: sophgo: add initial CV1812H SoC device tree
  riscv: dts: sophgo: add Huashan Pi board device tree

 .../sifive,plic-1.0.0.yaml                    |   1 +
 .../devicetree/bindings/riscv/sophgo.yaml     |   4 +
 .../bindings/timer/sifive,clint.yaml          |   1 +
 arch/riscv/boot/dts/sophgo/Makefile           |   1 +
 arch/riscv/boot/dts/sophgo/cv1800b.dtsi       |  95 +---------
 arch/riscv/boot/dts/sophgo/cv180x.dtsi        | 178 ++++++++++++++++++
 .../boot/dts/sophgo/cv1812h-huashan-pi.dts    |  48 +++++
 arch/riscv/boot/dts/sophgo/cv1812h.dtsi       |  36 ++++
 8 files changed, 270 insertions(+), 94 deletions(-)
 create mode 100644 arch/riscv/boot/dts/sophgo/cv180x.dtsi
 create mode 100644 arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts
 create mode 100644 arch/riscv/boot/dts/sophgo/cv1812h.dtsi

--
2.42.0