[PATCH v2 2/2] riscv: errata: thead: use pa based instructions for CMO

Guo Ren guoren at kernel.org
Sun Oct 8 03:11:29 PDT 2023


On Sun, Oct 1, 2023 at 6:46 PM Jisheng Zhang <jszhang at kernel.org> wrote:
>
> T-HEAD CPUs such as C906/C910/C920 support phy address based CMO, use
> them so that we don't need to convert to virt address.
>
> Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
> ---
>  arch/riscv/errata/thead/errata.c | 18 ++++++------------
>  1 file changed, 6 insertions(+), 12 deletions(-)
>
> diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c
> index 3fefeb1b456e..632557f36b19 100644
> --- a/arch/riscv/errata/thead/errata.c
> +++ b/arch/riscv/errata/thead/errata.c
> @@ -58,9 +58,9 @@ static bool errata_probe_pbmt(unsigned int stage,
>   * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
>   *   0000000    11001     00000      000      00000  0001011
>   */
> -#define THEAD_inval_A0 ".long 0x0265000b"
> -#define THEAD_clean_A0 ".long 0x0255000b"
> -#define THEAD_flush_A0 ".long 0x0275000b"
> +#define THEAD_inval_A0 ".long 0x02a5000b"
> +#define THEAD_clean_A0 ".long 0x0295000b"
> +#define THEAD_flush_A0 ".long 0x02b5000b"
>  #define THEAD_SYNC_S   ".long 0x0190000b"
>
>  #define THEAD_CMO_OP(_op, _start, _size, _cachesize)                   \
> @@ -79,23 +79,17 @@ asm volatile("mv a0, %1\n\t"                                                \
>
>  static void thead_errata_cache_inv(phys_addr_t paddr, size_t size)
>  {
> -       void *vaddr = phys_to_virt(paddr);
> -
> -       THEAD_CMO_OP(inval, vaddr, size, riscv_cbom_block_size);
> +       THEAD_CMO_OP(inval, paddr, size, riscv_cbom_block_size);
>  }
>
>  static void thead_errata_cache_wback(phys_addr_t paddr, size_t size)
>  {
> -       void *vaddr = phys_to_virt(paddr);
> -
> -       THEAD_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
> +       THEAD_CMO_OP(clean, paddr, size, riscv_cbom_block_size);
>  }
>
>  static void thead_errata_cache_wback_inv(phys_addr_t paddr, size_t size)
>  {
> -       void *vaddr = phys_to_virt(paddr);
> -
> -       THEAD_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> +       THEAD_CMO_OP(flush, paddr, size, riscv_cbom_block_size);
>  }
>
>  static const struct riscv_nonstd_cache_ops thead_errata_cmo_ops = {
> --
> 2.40.1
>
Thx, Reviewed-by: Guo Ren <guoren at kernel.org>

-- 
Best Regards
 Guo Ren



More information about the linux-riscv mailing list