[PATCH v2 4/5] riscv: dts: sophgo: add initial CV1800B SoC device tree

Chen Wang unicorn_wang at outlook.com
Sat Oct 7 05:42:42 PDT 2023


On 2023/10/6 20:14, Jisheng Zhang wrote:
> Add initial device tree for the CV1800B RISC-V SoC by SOPHGO.
>
> Signed-off-by: Jisheng Zhang <jszhang at kernel.org>

Acked-by: Chen Wang <unicorn_wang at outlook.com>

Thanks, Chen
> ---
>   arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 123 ++++++++++++++++++++++++
>   1 file changed, 123 insertions(+)
>   create mode 100644 arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>
> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> new file mode 100644
> index 000000000000..df40e87ee063
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> @@ -0,0 +1,123 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> +	compatible = "sophgo,cv1800b";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	cpus: cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		timebase-frequency = <25000000>;
> +
> +		cpu0: cpu at 0 {
> +			compatible = "thead,c906", "riscv";
> +			device_type = "cpu";
> +			reg = <0>;
> +			d-cache-block-size = <64>;
> +			d-cache-sets = <512>;
> +			d-cache-size = <65536>;
> +			i-cache-block-size = <64>;
> +			i-cache-sets = <128>;
> +			i-cache-size = <32768>;
> +			mmu-type = "riscv,sv39";
> +			riscv,isa = "rv64imafdc";
> +			riscv,isa-base = "rv64i";
> +			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
> +					       "zifencei", "zihpm";
> +
> +			cpu0_intc: interrupt-controller {
> +				compatible = "riscv,cpu-intc";
> +				interrupt-controller;
> +				#address-cells = <0>;
> +				#interrupt-cells = <1>;
> +			};
> +		};
> +	};
> +
> +	osc: oscillator {
> +		compatible = "fixed-clock";
> +		clock-output-names = "osc_25m";
> +		#clock-cells = <0>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		interrupt-parent = <&plic>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		dma-noncoherent;
> +		ranges;
> +
> +		uart0: serial at 4140000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x04140000 0x100>;
> +			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&osc>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		uart1: serial at 4150000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x04150000 0x100>;
> +			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&osc>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		uart2: serial at 4160000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x04160000 0x100>;
> +			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&osc>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		uart3: serial at 4170000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x04170000 0x100>;
> +			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&osc>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		uart4: serial at 41c0000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x041c0000 0x100>;
> +			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&osc>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		plic: interrupt-controller at 70000000 {
> +			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
> +			reg = <0x70000000 0x4000000>;
> +			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
> +			interrupt-controller;
> +			#address-cells = <0>;
> +			#interrupt-cells = <2>;
> +			riscv,ndev = <101>;
> +		};
> +
> +		clint: timer at 74000000 {
> +			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
> +			reg = <0x74000000 0x10000>;
> +			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
> +		};
> +	};
> +};



More information about the linux-riscv mailing list