[PATCH 4/5] riscv: dts: sophgo: add initial CV1800B SoC device tree

[Conor Dooley]

On Sun, Oct 01, 2023 at 06:34:21AM +0800, Inochi Amaoto wrote:
> Hi, Jisheng

> >Add initial device tree for the CV1800B RISC-V SoC by SOPHGO.

> 
> You add the clint dt-bindings of CV1800B clint, but I don't see the clint
> node in this dt. The SBI needs this clint node to provide timer for linux.
> AFAIK, the dt of SBI comes from the linux or the bootloader, and bootloader
> may load the linux dt and pass it to the SBI. I think it is better to add
> the clint node.

> In addition, please separate the peripheral node to a different file, which
> can be reused by both the CV1800 series and CV1810 series.

How do these SoCs differ?
Documentation seems rather lacking, but I was able to find something on
github that suggests there is also a cv180zb. The difference between the
three seems to, from a quick look, be their video encoding capabilities.
Is that correct?

Cheers,
Conor.

> >
> >Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
> >---
> > arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 117 ++++++++++++++++++++++++
> > 1 file changed, 117 insertions(+)
> > create mode 100644 arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> >
> >diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> >new file mode 100644
> >index 000000000000..8829bebaa017
> >--- /dev/null
> >+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> >@@ -0,0 +1,117 @@
> >+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >+/*
> >+ * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
> >+ */
> >+
> >+#include <dt-bindings/interrupt-controller/irq.h>
> >+
> >+/ {
> >+	compatible = "sophgo,cv1800b";
> >+	#address-cells = <1>;
> >+	#size-cells = <1>;
> >+
> >+	cpus: cpus {
> >+		#address-cells = <1>;
> >+		#size-cells = <0>;
> >+		timebase-frequency = <25000000>;
> >+
> >+		cpu0: cpu at 0 {
> >+			compatible = "thead,c906", "riscv";
> >+			device_type = "cpu";
> >+			reg = <0>;
> >+			d-cache-block-size = <64>;
> >+			d-cache-sets = <512>;
> >+			d-cache-size = <65536>;
> >+			i-cache-block-size = <64>;
> >+			i-cache-sets = <128>;
> >+			i-cache-size = <32768>;
> >+			mmu-type = "riscv,sv39";
> >+			riscv,isa = "rv64imafdc";
> >+			riscv,isa-base = "rv64i";
> >+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
> >+					       "zifencei", "zihpm";
> >+
> >+			cpu0_intc: interrupt-controller {
> >+				compatible = "riscv,cpu-intc";
> >+				interrupt-controller;
> >+				#address-cells = <0>;
> >+				#interrupt-cells = <1>;
> >+			};
> >+		};
> >+	};
> >+
> >+	osc: oscillator {
> >+		compatible = "fixed-clock";
> >+		clock-output-names = "osc_25m";
> >+		#clock-cells = <0>;
> >+	};
> >+
> >+	soc {
> >+		compatible = "simple-bus";
> >+		interrupt-parent = <&plic>;
> >+		#address-cells = <1>;
> >+		#size-cells = <1>;
> >+		dma-noncoherent;
> >+		ranges;
> >+
> >+		uart0: serial at 04140000 {
> >+			compatible = "snps,dw-apb-uart";
> >+			reg = <0x04140000 0x100>;
> >+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
> >+			clocks = <&osc>;
> >+			reg-shift = <2>;
> >+			reg-io-width = <4>;
> >+			status = "disabled";
> >+		};
> >+
> >+		uart1: serial at 04150000 {
> >+			compatible = "snps,dw-apb-uart";
> >+			reg = <0x04150000 0x100>;
> >+			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
> >+			clocks = <&osc>;
> >+			reg-shift = <2>;
> >+			reg-io-width = <4>;
> >+			status = "disabled";
> >+		};
> >+
> >+		uart2: serial at 04160000 {
> >+			compatible = "snps,dw-apb-uart";
> >+			reg = <0x04160000 0x100>;
> >+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
> >+			clocks = <&osc>;
> >+			reg-shift = <2>;
> >+			reg-io-width = <4>;
> >+			status = "disabled";
> >+		};
> >+
> >+		uart3: serial at 04170000 {
> >+			compatible = "snps,dw-apb-uart";
> >+			reg = <0x04170000 0x100>;
> >+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
> >+			clocks = <&osc>;
> >+			reg-shift = <2>;
> >+			reg-io-width = <4>;
> >+			status = "disabled";
> >+		};
> >+
> >+		uart4: serial at 041c0000 {
> >+			compatible = "snps,dw-apb-uart";
> >+			reg = <0x041c0000 0x100>;
> >+			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
> >+			clocks = <&osc>;
> >+			reg-shift = <2>;
> >+			reg-io-width = <4>;
> >+			status = "disabled";
> >+		};
> >+
> >+		plic: interrupt-controller at 70000000 {
> >+			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
> >+			reg = <0x70000000 0x4000000>;
> >+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
> >+			interrupt-controller;
> >+			#address-cells = <0>;
> >+			#interrupt-cells = <2>;
> >+			riscv,ndev = <101>;
> >+		};
> >+	};
> >+};
> >--
> >2.40.1
> >
> >
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20231001/ec2dd40c/attachment.sig>