Bug report: kernel paniced when system hibernates

Conor Dooley conor at kernel.org
Wed May 24 06:49:31 PDT 2023


Alex, Anup,

On Thu, May 18, 2023 at 07:34:16PM +0530, Anup Patel wrote:
> On Thu, May 18, 2023 at 5:39 PM Alexandre Ghiti <alex at ghiti.fr> wrote:
> > On 5/18/23 08:53, Anup Patel wrote:
> > > On Wed, May 17, 2023 at 8:26 PM Alexandre Ghiti <alexghiti at rivosinc.com> wrote:
> > >> On Wed, May 17, 2023 at 1:28 PM Conor Dooley <conor.dooley at microchip.com> wrote:
> > >>> On Wed, May 17, 2023 at 10:58:02AM +0200, Alexandre Ghiti wrote:
> > >>>> On Tue, May 16, 2023 at 1:12 PM Alexandre Ghiti <alexghiti at rivosinc.com> wrote:
> > >>>>> On Tue, May 16, 2023 at 11:24 AM Song Shuai <suagrfillet at gmail.com> wrote:
> > >>>>> I actually removed this flag a few years ago, and I have to admit that
> > >>>>> I need to check if that's necessary: the goal of commit 3335068f8721
> > >>>>> ("riscv: Use PUD/P4D/PGD pages for the linear mapping") is to expose
> > >>>>> the "right" start of DRAM so that we can align virtual and physical
> > >>>>> addresses on a 1GB boundary.
> > >>>>>
> > >>>>> So I have to check if a nomap region is actually added as a
> > >>>>> memblock.memory.regions[] or not: if yes, that's perfect, let's add
> > >>>>> the nomap attributes to the PMP regions, otherwise, I don't think that
> > >>>>> is a good solution.
> > >>>> So here is the current linear mapping without nomap in openSBI:
> > >>>>
> > >>>> ---[ Linear mapping ]---
> > >>>> 0xff60000000000000-0xff60000000200000    0x0000000080000000         2M
> > >>>> PMD     D A G . . W R V
> > >>>> 0xff60000000200000-0xff60000000e00000    0x0000000080200000        12M
> > >>>> PMD     D A G . . . R V
> > >>>>
> > >>>> And below the linear mapping with nomap in openSBI:
> > >>>>
> > >>>> ---[ Linear mapping ]---
> > >>>> 0xff60000000080000-0xff60000000200000    0x0000000080080000      1536K
> > >>>> PTE     D A G . . W R V
> > >>>> 0xff60000000200000-0xff60000000e00000    0x0000000080200000        12M
> > >>>> PMD     D A G . . . R V
> > >>>>
> > >>>> So adding nomap does not misalign virtual and physical addresses, it
> > >>>> prevents the usage of 1GB page for this area though, so that's a
> > >>>> solution, we just lose this 1GB page here.
> > >>>>
> > >>>> But even though that may be the fix, I think we also need to fix that
> > >>>> in the kernel as it would break compatibility with certain versions of
> > >>>> openSBI *if* we fix openSBI...So here are a few solutions:
> > >>>>
> > >>>> 1. we can mark all "mmode_resv" nodes in the device tree as nomap,
> > >>>> before the linear mapping is established (IIUC, those nodes are added
> > >>>> by openSBI to advertise PMP regions)
> > >>>>      -> This amounts to the same fix as opensbi and we lose the 1GB hugepage.
> > >>> AFAIU, losing the 1 GB hugepage is a regression, which would make this
> > >>> not an option, right?
> > >> Not sure this is a real regression, I'd rather avoid it, but as
> > >> mentioned in my first answer, Mike Rapoport showed that it was making
> > >> no difference performance-wise...
> > >>
> > >>>> 2. we can tweak pfn_is_nosave function to *not* save pfn corresponding
> > >>>> to PMP regions
> > >>>>      -> We don't lose the 1GB hugepage \o/
> > >>>> 3. we can use register_nosave_region() to not save the "mmode_resv"
> > >>>> regions (x86 does that
> > >>>> https://elixir.bootlin.com/linux/v6.4-rc1/source/arch/x86/kernel/e820.c#L753)
> > >>>>      -> We don't lose the 1GB hugepage \o/
> > >>>> 4. Given JeeHeng pointer to
> > >>>> https://elixir.bootlin.com/linux/v6.4-rc1/source/kernel/power/snapshot.c#L1340,
> > >>>> we can mark those pages as non-readable and make the hibernation
> > >>>> process not save those pages
> > >>>>      -> Very late-in-the-day idea, not sure what it's worth, we also
> > >>>> lose the 1GB hugepage...
> > >>> Ditto here re: introducing another regression.
> > >>>
> > >>>> To me, the best solution is 3 as it would prepare for other similar
> > >>>> issues later, it is similar to x86 and it allows us to keep 1GB
> > >>>> hugepages.
> > >>>>
> > >>>> I have been thinking, and to me nomap does not provide anything since
> > >>>> the kernel should not address this memory range, so if it does, we
> > >>>> must fix the kernel.
> > >>>>
> > >>>> Let me know what you all think, I'll be preparing a PoC of 3 in the meantime!
> > >>> #3 would probably get my vote too. It seems like you could use it
> > >>> dynamically if there was to be a future other provider of "mmode_resv"
> > >>> regions, rather than doing something location-specific.
> > >>>
> > >>> We should probably document these opensbi reserved memory nodes though
> > >>> in a dt-binding or w/e if we are going to be relying on them to not
> > >>> crash!
> > > Depending on a particular node name is fragile. If we really need
> > > information from DT then I suggest adding "no-save-restore" DT
> > > property in reserved memory nodes.
> >
> >
> > I understand your point, the node name is the only thing I found that
> > would work with current opensbi: any other idea what we could use instead?
> >
> >
> > >> Yes, you're right, let's see what Atish and Anup think!
> > > I think we have two possible approaches:
> > >
> > > 1) Update OpenSBI to set "no-map" DT property for firmware
> > >      reserved regions. We were doing this previously but removed
> > >      it later for performance reasons mentioned by Alex. It is also
> > >      worth mentioning that ARM Trusted Firmware also sets "no-map"
> > >      DT property for firmware reserved regions.
> > >
> > > 2) Add a new "no-save-restore" DT property in the reserved
> > >      memory DT bindings. The hibernate support of Linux arch/riscv
> > >      will use this DT property to exclude memory regions from
> > >      save-restore. The EFI implementation of EDK2 and U-Boot
> > >      should do the following:
> > >      1) Treat all memory having "no-map" DT property as EFI
> > >          reserved memory
> > >      2) Treat all memory not having "no-map" DT property and
> > >          not having "no-save-restore" DT property as EfiBootServicesData
> > >      3) Treat all memory not having "no-map" DT property and
> > >           having "no-save-restore" DT property as EfiRuntimeServiceData
> > >           (Refer,
> > > https://devicetree-specification.readthedocs.io/en/latest/chapter3-devicenodes.html#reserved-memory-and-uefi)
> > >
> > > Personally, I am leaning towards approach#1 since approach#2
> > > will require changing DeviceTree specification as well.
> >
> >
> > If needed, indeed #1 is the simplest, but I insist, to me it is not
> > needed (and we don't have it in the current opensbi), if you have
> > another opinion, I'm open to discuss it!
> 
> I agree with you, backward compatibility with older firmwares
> is important.
> 
> Let's go with your proposed change to treat reserved DT nodes
> with "mmode_resv*" name as M-mode firmware memory (it could
> be any M-mode firmware). We will certainly need to document it
> somewhere as an expectation of Linux RISC-V kernel.

Actually, you two both probably know the answer to this, but was there a
release done of OpenSBI where the reserved memory region was not
specified to be no-map?

> 
> @Sunil How about treating "mmode_resv*" as
> EfiRuntimeServiceData in EDK2 ? Other reserved memory
> nodes can follow the device tree specification.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230524/68fb6ceb/attachment.sig>


More information about the linux-riscv mailing list