[PATCH v4 1/7] dt-bindings: clock: Add StarFive JH7110 PLL clock generator

Xingyu Wu xingyu.wu at starfivetech.com
Mon May 22 19:40:07 PDT 2023


On 2023/5/19 22:16, Conor Dooley wrote:
> On Fri, May 19, 2023 at 03:57:33PM +0200, Torsten Duwe wrote:
>> On Fri, May 12, 2023 at 10:20:30AM +0800, Xingyu Wu wrote:
>> [...]
>> >  #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>> >  #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>> >  
>> > +/* PLL clocks */
>> > +#define JH7110_CLK_PLL0_OUT			0
>> > +#define JH7110_CLK_PLL1_OUT			1
>> > +#define JH7110_CLK_PLL2_OUT			2
>> 
>> In U-Boot commit 58c9c60b Yanhong Wang added:
>> 
>> +
>> +#define JH7110_SYSCLK_PLL0_OUT                       190
>> +#define JH7110_SYSCLK_PLL1_OUT                       191
>> +#define JH7110_SYSCLK_PLL2_OUT                       192
>> +
>> +#define JH7110_SYSCLK_END                    193
>> 
>> in that respective file.
>> 
>> > +#define JH7110_PLLCLK_END			3
>> > +
>> >  /* SYSCRG clocks */
>> >  #define JH7110_SYSCLK_CPU_ROOT			0
>> 
>> If the symbolic names referred to the same items, would it be possible
>> to keep the two files in sync somehow?
> 
> Ohh, that's not good.. If you pass the U-Boot dtb to Linux it won't
> understand the numbering. The headers are part of the dt-binding :/

Because in Linux, the PLL driver is separate from SYSCRG driver and the
numbering starts from 0. But in Uboot, the PLL driver is included in
the SYSCRG driver and the numbering follows the SYSCRG.

Best regards,
Xingyu Wu



More information about the linux-riscv mailing list