[PATCH V6 16/21] irqchip/riscv-intc: Add ACPI support

Sunil V L sunilvl at ventanamicro.com
Sun May 14 22:49:23 PDT 2023


Add support for initializing the RISC-V INTC driver on ACPI
platforms.

Signed-off-by: Sunil V L <sunilvl at ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
Reviewed-by: Andrew Jones <ajones at ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
---
 drivers/irqchip/irq-riscv-intc.c | 70 +++++++++++++++++++++++++-------
 1 file changed, 55 insertions(+), 15 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index f229e3e66387..4adeee1bc391 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -6,6 +6,7 @@
  */
 
 #define pr_fmt(fmt) "riscv-intc: " fmt
+#include <linux/acpi.h>
 #include <linux/atomic.h>
 #include <linux/bits.h>
 #include <linux/cpu.h>
@@ -112,6 +113,30 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
 	return intc_domain->fwnode;
 }
 
+static int __init riscv_intc_init_common(struct fwnode_handle *fn)
+{
+	int rc;
+
+	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
+					       &riscv_intc_domain_ops, NULL);
+	if (!intc_domain) {
+		pr_err("unable to add IRQ domain\n");
+		return -ENXIO;
+	}
+
+	rc = set_handle_irq(&riscv_intc_irq);
+	if (rc) {
+		pr_err("failed to set irq handler\n");
+		return rc;
+	}
+
+	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
+
+	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+
+	return 0;
+}
+
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
@@ -133,24 +158,39 @@ static int __init riscv_intc_init(struct device_node *node,
 	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
 		return 0;
 
-	intc_domain = irq_domain_add_linear(node, BITS_PER_LONG,
-					    &riscv_intc_domain_ops, NULL);
-	if (!intc_domain) {
-		pr_err("unable to add IRQ domain\n");
-		return -ENXIO;
-	}
+	return riscv_intc_init_common(of_node_to_fwnode(node));
+}
 
-	rc = set_handle_irq(&riscv_intc_irq);
-	if (rc) {
-		pr_err("failed to set irq handler\n");
-		return rc;
-	}
+IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
 
-	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
+#ifdef CONFIG_ACPI
 
-	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
+				       const unsigned long end)
+{
+	struct fwnode_handle *fn;
+	struct acpi_madt_rintc *rintc;
 
-	return 0;
+	rintc = (struct acpi_madt_rintc *)header;
+
+	/*
+	 * The ACPI MADT will have one INTC for each CPU (or HART)
+	 * so riscv_intc_acpi_init() function will be called once
+	 * for each INTC. We only do INTC initialization
+	 * for the INTC belonging to the boot CPU (or boot HART).
+	 */
+	if (riscv_hartid_to_cpuid(rintc->hart_id) != smp_processor_id())
+		return 0;
+
+	fn = irq_domain_alloc_named_fwnode("RISCV-INTC");
+	if (!fn) {
+		pr_err("unable to allocate INTC FW node\n");
+		return -ENOMEM;
+	}
+
+	return riscv_intc_init_common(fn);
 }
 
-IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
+IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC, NULL,
+		     ACPI_MADT_RINTC_VERSION_V1, riscv_intc_acpi_init);
+#endif
-- 
2.34.1




More information about the linux-riscv mailing list