[PATCH v7 19/22] riscv: dts: starfive: Add initial StarFive JH7110 device tree
Shengyu Qu
wiagn233 at outlook.com
Sun May 7 03:03:19 PDT 2023
Hi Hal,
> From: Emil Renner Berthing <kernel at esmil.dk>
>
> Add initial device tree for the JH7110 RISC-V SoC by StarFive
> Technology Ltd.
>
> Tested-by: Tommaso Merciai <tomm.merciai at gmail.com>
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
> Co-developed-by: Jianlong Huang <jianlong.huang at starfivetech.com>
> Signed-off-by: Jianlong Huang <jianlong.huang at starfivetech.com>
> Co-developed-by: Hal Feng <hal.feng at starfivetech.com>
> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> ---
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 509 +++++++++++++++++++++++
> 1 file changed, 509 insertions(+)
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> new file mode 100644
> index 000000000000..d484ecdf93f7
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -0,0 +1,509 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel at esmil.dk>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/starfive,jh7110-crg.h>
> +#include <dt-bindings/reset/starfive,jh7110-crg.h>
> +
> +/ {
> + compatible = "starfive,jh7110";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + S7_0: cpu at 0 {
> + compatible = "sifive,s7", "riscv";
> + reg = <0>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <8192>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <16384>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imac_zba_zbb";
> + tlb-split;
> + status = "disabled";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_1: cpu at 1 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <1>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc_zba_zbb";
> + tlb-split;
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_2: cpu at 2 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <2>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc_zba_zbb";
> + tlb-split;
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_3: cpu at 3 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <3>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc_zba_zbb";
> + tlb-split;
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_4: cpu at 4 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <4>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc_zba_zbb";
> + tlb-split;
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&S7_0>;
> + };
> +
> + core1 {
> + cpu = <&U74_1>;
> + };
> +
> + core2 {
> + cpu = <&U74_2>;
> + };
> +
> + core3 {
> + cpu = <&U74_3>;
> + };
> +
> + core4 {
> + cpu = <&U74_4>;
> + };
> + };
> + };
> + };
> +
> + gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "gmac0_rgmii_rxin";
> + #clock-cells = <0>;
> + };
> +
> + gmac0_rmii_refin: gmac0-rmii-refin-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "gmac0_rmii_refin";
> + #clock-cells = <0>;
> + };
> +
> + gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "gmac1_rgmii_rxin";
> + #clock-cells = <0>;
> + };
> +
> + gmac1_rmii_refin: gmac1-rmii-refin-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "gmac1_rmii_refin";
> + #clock-cells = <0>;
> + };
> +
> + i2srx_bclk_ext: i2srx-bclk-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "i2srx_bclk_ext";
> + #clock-cells = <0>;
> + };
> +
> + i2srx_lrck_ext: i2srx-lrck-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "i2srx_lrck_ext";
> + #clock-cells = <0>;
> + };
> +
> + i2stx_bclk_ext: i2stx-bclk-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "i2stx_bclk_ext";
> + #clock-cells = <0>;
> + };
> +
> + i2stx_lrck_ext: i2stx-lrck-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "i2stx_lrck_ext";
> + #clock-cells = <0>;
> + };
> +
> + mclk_ext: mclk-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "mclk_ext";
> + #clock-cells = <0>;
> + };
> +
> + osc: oscillator {
> + compatible = "fixed-clock";
> + clock-output-names = "osc";
> + #clock-cells = <0>;
> + };
> +
> + rtc_osc: rtc-oscillator {
> + compatible = "fixed-clock";
> + clock-output-names = "rtc_osc";
> + #clock-cells = <0>;
> + };
> +
> + tdm_ext: tdm-ext-clock {
> + compatible = "fixed-clock";
> + clock-output-names = "tdm_ext";
> + #clock-cells = <0>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
Do we really need this interrupt-parent? Seems it is causing a
dependency cycle:
platform soc: Fixed dependency cycle(s) with
/soc/interrupt-controller at c000000
And seems fu740 dts doesn't have this.
Best regards,
Shengyu
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clint: timer at 2000000 {
> + compatible = "starfive,jh7110-clint", "sifive,clint0";
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>;
> + };
> +
> + ccache: cache-controller at 2010000 {
> + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
> + reg = <0x0 0x2010000 0x0 0x4000>;
> + interrupts = <1>, <3>, <4>, <2>;
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <2048>;
> + cache-size = <2097152>;
> + cache-unified;
> + };
> +
> + plic: interrupt-controller at c000000 {
> + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + riscv,ndev = <136>;
> + };
> +
> + uart0: serial at 10000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
> + <&syscrg JH7110_SYSCLK_UART0_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART0_APB>;
> + interrupts = <32>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 10010000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
> + <&syscrg JH7110_SYSCLK_UART1_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART1_APB>;
> + interrupts = <33>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 10020000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
> + <&syscrg JH7110_SYSCLK_UART2_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART2_APB>;
> + interrupts = <34>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c at 10030000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x10030000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C0_APB>;
> + interrupts = <35>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c at 10040000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x10040000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C1_APB>;
> + interrupts = <36>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at 10050000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x10050000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C2_APB>;
> + interrupts = <37>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 12000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
> + <&syscrg JH7110_SYSCLK_UART3_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART3_APB>;
> + interrupts = <45>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart4: serial at 12010000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
> + <&syscrg JH7110_SYSCLK_UART4_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART4_APB>;
> + interrupts = <46>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart5: serial at 12020000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
> + <&syscrg JH7110_SYSCLK_UART5_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART5_APB>;
> + interrupts = <47>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c at 12030000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x12030000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C3_APB>;
> + interrupts = <48>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c at 12040000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x12040000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C4_APB>;
> + interrupts = <49>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c at 12050000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x12050000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C5_APB>;
> + interrupts = <50>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c at 12060000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0x12060000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>;
> + clock-names = "ref";
> + resets = <&syscrg JH7110_SYSRST_I2C6_APB>;
> + interrupts = <51>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + syscrg: clock-controller at 13020000 {
> + compatible = "starfive,jh7110-syscrg";
> + reg = <0x0 0x13020000 0x0 0x10000>;
> + clocks = <&osc>, <&gmac1_rmii_refin>,
> + <&gmac1_rgmii_rxin>,
> + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
> + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
> + <&tdm_ext>, <&mclk_ext>;
> + clock-names = "osc", "gmac1_rmii_refin",
> + "gmac1_rgmii_rxin",
> + "i2stx_bclk_ext", "i2stx_lrck_ext",
> + "i2srx_bclk_ext", "i2srx_lrck_ext",
> + "tdm_ext", "mclk_ext";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + sysgpio: pinctrl at 13040000 {
> + compatible = "starfive,jh7110-sys-pinctrl";
> + reg = <0x0 0x13040000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>;
> + resets = <&syscrg JH7110_SYSRST_IOMUX_APB>;
> + interrupts = <86>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + aoncrg: clock-controller at 17000000 {
> + compatible = "starfive,jh7110-aoncrg";
> + reg = <0x0 0x17000000 0x0 0x10000>;
> + clocks = <&osc>, <&gmac0_rmii_refin>,
> + <&gmac0_rgmii_rxin>,
> + <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
> + <&syscrg JH7110_SYSCLK_APB_BUS>,
> + <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
> + <&rtc_osc>;
> + clock-names = "osc", "gmac0_rmii_refin",
> + "gmac0_rgmii_rxin", "stg_axiahb",
> + "apb_bus", "gmac0_gtxclk",
> + "rtc_osc";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + aongpio: pinctrl at 17020000 {
> + compatible = "starfive,jh7110-aon-pinctrl";
> + reg = <0x0 0x17020000 0x0 0x10000>;
> + resets = <&aoncrg JH7110_AONRST_IOMUX>;
> + interrupts = <85>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +};
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_0xE3520CC91929C8E7.asc
Type: application/pgp-keys
Size: 6868 bytes
Desc: OpenPGP public key
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230507/b044a731/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230507/b044a731/attachment.sig>
More information about the linux-riscv
mailing list