[PATCH v8 2/2] arm64: support batched/deferred tlb shootdown during page reclamation
Yicong Yang
yangyicong at huawei.com
Thu Mar 30 06:45:46 PDT 2023
Hi Punit,
On 2023/3/30 21:15, Punit Agrawal wrote:
> Hi Yicong,
>
> Yicong Yang <yangyicong at huawei.com> writes:
>
>> From: Barry Song <v-songbaohua at oppo.com>
>>
>> on x86, batched and deferred tlb shootdown has lead to 90%
>> performance increase on tlb shootdown. on arm64, HW can do
>> tlb shootdown without software IPI. But sync tlbi is still
>> quite expensive.
>>
>> Even running a simplest program which requires swapout can
>> prove this is true,
>> #include <sys/types.h>
>> #include <unistd.h>
>> #include <sys/mman.h>
>> #include <string.h>
>>
>> int main()
>> {
>> #define SIZE (1 * 1024 * 1024)
>> volatile unsigned char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
>> MAP_SHARED | MAP_ANONYMOUS, -1, 0);
>>
>> memset(p, 0x88, SIZE);
>>
>> for (int k = 0; k < 10000; k++) {
>> /* swap in */
>> for (int i = 0; i < SIZE; i += 4096) {
>> (void)p[i];
>> }
>>
>> /* swap out */
>> madvise(p, SIZE, MADV_PAGEOUT);
>> }
>> }
>>
>> Perf result on snapdragon 888 with 8 cores by using zRAM
>> as the swap block device.
>>
>> ~ # perf record taskset -c 4 ./a.out
>> [ perf record: Woken up 10 times to write data ]
>> [ perf record: Captured and wrote 2.297 MB perf.data (60084 samples) ]
>> ~ # perf report
>> # To display the perf.data header info, please use --header/--header-only options.
>> # To display the perf.data header info, please use --header/--header-only options.
>> #
>> #
>> # Total Lost Samples: 0
>> #
>> # Samples: 60K of event 'cycles'
>> # Event count (approx.): 35706225414
>> #
>> # Overhead Command Shared Object Symbol
>> # ........ ....... ................. .............................................................................
>> #
>> 21.07% a.out [kernel.kallsyms] [k] _raw_spin_unlock_irq
>> 8.23% a.out [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
>> 6.67% a.out [kernel.kallsyms] [k] filemap_map_pages
>> 6.16% a.out [kernel.kallsyms] [k] __zram_bvec_write
>> 5.36% a.out [kernel.kallsyms] [k] ptep_clear_flush
>> 3.71% a.out [kernel.kallsyms] [k] _raw_spin_lock
>> 3.49% a.out [kernel.kallsyms] [k] memset64
>> 1.63% a.out [kernel.kallsyms] [k] clear_page
>> 1.42% a.out [kernel.kallsyms] [k] _raw_spin_unlock
>> 1.26% a.out [kernel.kallsyms] [k] mod_zone_state.llvm.8525150236079521930
>> 1.23% a.out [kernel.kallsyms] [k] xas_load
>> 1.15% a.out [kernel.kallsyms] [k] zram_slot_lock
>>
>> ptep_clear_flush() takes 5.36% CPU in the micro-benchmark
>> swapping in/out a page mapped by only one process. If the
>> page is mapped by multiple processes, typically, like more
>> than 100 on a phone, the overhead would be much higher as
>> we have to run tlb flush 100 times for one single page.
>> Plus, tlb flush overhead will increase with the number
>> of CPU cores due to the bad scalability of tlb shootdown
>> in HW, so those ARM64 servers should expect much higher
>> overhead.
>>
>> Further perf annonate shows 95% cpu time of ptep_clear_flush
>> is actually used by the final dsb() to wait for the completion
>> of tlb flush. This provides us a very good chance to leverage
>> the existing batched tlb in kernel. The minimum modification
>> is that we only send async tlbi in the first stage and we send
>> dsb while we have to sync in the second stage.
>>
>> With the above simplest micro benchmark, collapsed time to
>> finish the program decreases around 5%.
>>
>> Typical collapsed time w/o patch:
>> ~ # time taskset -c 4 ./a.out
>> 0.21user 14.34system 0:14.69elapsed
>> w/ patch:
>> ~ # time taskset -c 4 ./a.out
>> 0.22user 13.45system 0:13.80elapsed
>>
>> Also, Yicong Yang added the following observation.
>> Tested with benchmark in the commit on Kunpeng920 arm64 server,
>> observed an improvement around 12.5% with command
>> `time ./swap_bench`.
>> w/o w/
>> real 0m13.460s 0m11.771s
>> user 0m0.248s 0m0.279s
>> sys 0m12.039s 0m11.458s
>>
>> Originally it's noticed a 16.99% overhead of ptep_clear_flush()
>> which has been eliminated by this patch:
>>
>> [root at localhost yang]# perf record -- ./swap_bench && perf report
>> [...]
>> 16.99% swap_bench [kernel.kallsyms] [k] ptep_clear_flush
>>
>> It is tested on 4,8,128 CPU platforms and shows to be beneficial on
>> large systems but may not have improvement on small systems like on
>> a 4 CPU platform. So make ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH depends
>> on CONFIG_EXPERT for this stage and make this disabled on systems
>> with less than 8 CPUs. User can modify this threshold according to
>> their own platforms by CONFIG_NR_CPUS_FOR_BATCHED_TLB.
>
> The commit log and the patch disagree on the name of the config option
> (CONFIG_NR_CPUS_FOR_BATCHED_TLB vs CONFIG_ARM64_NR_CPUS_FOR_BATCHED_TLB).
>
ah yes, it's a typo and I'll fix it.
> But more importantly, I was wondering why this posting doesn't address
> Catalin's feedback [a] about using a runtime tunable. Maybe I missed the
> follow-up discussion.
>
I must have missed that, terribly sorry for it... Thanks for pointing it out!
Let me try to implement a version using a runtime tunable and get back with
some test results.
Thanks,
Yicong
> Thanks,
> Punit
>
> [a] https://lore.kernel.org/linux-mm/Y7xMhPTAwcUT4O6b@arm.com/
>
>> Also this patch improve the performance of page migration. Using pmbench
>> and tries to migrate the pages of pmbench between node 0 and node 1 for
>> 20 times, this patch decrease the time used more than 50% and saved the
>> time used by ptep_clear_flush().
>>
>> This patch extends arch_tlbbatch_add_mm() to take an address of the
>> target page to support the feature on arm64. Also rename it to
>> arch_tlbbatch_add_pending() to better match its function since we
>> don't need to handle the mm on arm64 and add_mm is not proper.
>> add_pending will make sense to both as on x86 we're pending the
>> TLB flush operations while on arm64 we're pending the synchronize
>> operations.
>>
>> Cc: Anshuman Khandual <anshuman.khandual at arm.com>
>> Cc: Jonathan Corbet <corbet at lwn.net>
>> Cc: Nadav Amit <namit at vmware.com>
>> Cc: Mel Gorman <mgorman at suse.de>
>> Tested-by: Yicong Yang <yangyicong at hisilicon.com>
>> Tested-by: Xin Hao <xhao at linux.alibaba.com>
>> Tested-by: Punit Agrawal <punit.agrawal at bytedance.com>
>> Signed-off-by: Barry Song <v-songbaohua at oppo.com>
>> Signed-off-by: Yicong Yang <yangyicong at hisilicon.com>
>> Reviewed-by: Kefeng Wang <wangkefeng.wang at huawei.com>
>> Reviewed-by: Xin Hao <xhao at linux.alibaba.com>
>> Reviewed-by: Anshuman Khandual <anshuman.khandual at arm.com>
>> ---
>> .../features/vm/TLB/arch-support.txt | 2 +-
>> arch/arm64/Kconfig | 6 +++
>> arch/arm64/include/asm/tlbbatch.h | 12 +++++
>> arch/arm64/include/asm/tlbflush.h | 52 ++++++++++++++++++-
>> arch/x86/include/asm/tlbflush.h | 5 +-
>> include/linux/mm_types_task.h | 4 +-
>> mm/rmap.c | 12 +++--
>> 7 files changed, 81 insertions(+), 12 deletions(-)
>> create mode 100644 arch/arm64/include/asm/tlbbatch.h
>
>
> [...]
>
> .
>
More information about the linux-riscv
mailing list