[PATCH v4 2/4] mmc: starfive: Add sdio/emmc driver support
Shengyu Qu
wiagn233 at outlook.com
Tue Mar 28 09:08:57 PDT 2023
Hello William,
Sorry for making noise about this, but seems deleted voltage swtich function
doesn't help about this. But there's still a problem about eMMC speed.
Currently
only about 20MB/s maximum reading speed could be reached when using eMMC
on VF2, any idea about this?
Best regards,
Shengyu
在 2023/3/28 0:01, Shengyu Qu 写道:
> Hello William,
>
> I'm digging into downstream mmc driver these days and found a problem
>
> that current version mainline driver doesn't has a voltage switch
> function for
>
> it. Downstream older version has one but was deleted in this commit [1].
>
> It was deleted since vf2's SD slot doesn't have 1.8V input but
> commiter forgot
>
> that vf2's eMMC slot has a proper 1.8V input.
>
> So could you add voltage switch function for mainline? I've met a eMMC
> speed
>
> problem possibly due to it.
>
> Best regards,
>
> Shengyu
>
> [1]
> https://github.com/starfive-tech/linux/commit/8037d59091d276e74be38e5fafaaebe36eaa77e1
>
> 在 2023/2/15 19:32, William Qiu 写道:
>> Add sdio/emmc driver support for StarFive JH7110 soc.
>>
>> Tested-by: Conor Dooley <conor.dooley at microchip.com>
>> Signed-off-by: William Qiu <william.qiu at starfivetech.com>
>> ---
>> MAINTAINERS | 6 +
>> drivers/mmc/host/Kconfig | 10 ++
>> drivers/mmc/host/Makefile | 1 +
>> drivers/mmc/host/dw_mmc-starfive.c | 186 +++++++++++++++++++++++++++++
>> 4 files changed, 203 insertions(+)
>> create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 85e8f83161d7..644ac9479a6e 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19640,6 +19640,12 @@ F:
>> Documentation/devicetree/bindings/clock/starfive,jh71*.yaml
>> F: drivers/clk/starfive/clk-starfive-jh71*
>> F: include/dt-bindings/clock/starfive?jh71*.h
>> +STARFIVE JH7110 MMC/SD/SDIO DRIVER
>> +M: William Qiu <william.qiu at starfivetech.com>
>> +S: Supported
>> +F: Documentation/devicetree/bindings/mmc/starfive*
>> +F: drivers/mmc/host/dw_mmc-starfive.c
>> +
>> STARFIVE JH71X0 PINCTRL DRIVERS
>> M: Emil Renner Berthing <kernel at esmil.dk>
>> M: Jianlong Huang <jianlong.huang at starfivetech.com>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>> index fb1062a6394c..b87262503403 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -871,6 +871,16 @@ config MMC_DW_ROCKCHIP
>> Synopsys DesignWare Memory Card Interface driver. Select this
>> option
>> for platforms based on RK3066, RK3188 and RK3288 SoC's.
>> +config MMC_DW_STARFIVE
>> + tristate "StarFive specific extensions for Synopsys DW Memory
>> Card Interface"
>> + depends on SOC_STARFIVE
>> + depends on MMC_DW
>> + select MMC_DW_PLTFM
>> + help
>> + This selects support for StarFive JH7110 SoC specific
>> extensions to the
>> + Synopsys DesignWare Memory Card Interface driver. Select this
>> option
>> + for platforms based on StarFive JH7110 SoC.
>> +
>> config MMC_SH_MMCIF
>> tristate "SuperH Internal MMCIF support"
>> depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
>> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
>> index 4e4ceb32c4b4..32c0e5564b9a 100644
>> --- a/drivers/mmc/host/Makefile
>> +++ b/drivers/mmc/host/Makefile
>> @@ -56,6 +56,7 @@ obj-$(CONFIG_MMC_DW_HI3798CV200) +=
>> dw_mmc-hi3798cv200.o
>> obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o
>> obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
>> obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o
>> +obj-$(CONFIG_MMC_DW_STARFIVE) += dw_mmc-starfive.o
>> obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
>> obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
>> obj-$(CONFIG_MMC_VUB300) += vub300.o
>> diff --git a/drivers/mmc/host/dw_mmc-starfive.c
>> b/drivers/mmc/host/dw_mmc-starfive.c
>> new file mode 100644
>> index 000000000000..40f5969b07a6
>> --- /dev/null
>> +++ b/drivers/mmc/host/dw_mmc-starfive.c
>> @@ -0,0 +1,186 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * StarFive Designware Mobile Storage Host Controller Driver
>> + *
>> + * Copyright (c) 2022 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/mmc/host.h>
>> +#include <linux/module.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#include "dw_mmc.h"
>> +#include "dw_mmc-pltfm.h"
>> +
>> +#define ALL_INT_CLR 0x1ffff
>> +#define MAX_DELAY_CHAIN 32
>> +
>> +struct starfive_priv {
>> + struct device *dev;
>> + struct regmap *reg_syscon;
>> + u32 syscon_offset;
>> + u32 syscon_shift;
>> + u32 syscon_mask;
>> +};
>> +
>> +static void dw_mci_starfive_set_ios(struct dw_mci *host, struct
>> mmc_ios *ios)
>> +{
>> + int ret;
>> + unsigned int clock;
>> +
>> + if (ios->timing == MMC_TIMING_MMC_DDR52 || ios->timing ==
>> MMC_TIMING_UHS_DDR50) {
>> + clock = (ios->clock > 50000000 && ios->clock <= 52000000) ?
>> 100000000 : ios->clock;
>> + ret = clk_set_rate(host->ciu_clk, clock);
>> + if (ret)
>> + dev_dbg(host->dev, "Use an external frequency divider
>> %uHz\n", ios->clock);
>> + host->bus_hz = clk_get_rate(host->ciu_clk);
>> + } else {
>> + dev_dbg(host->dev, "Using the internal divider\n");
>> + }
>> +}
>> +
>> +static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot,
>> + u32 opcode)
>> +{
>> + static const int grade = MAX_DELAY_CHAIN;
>> + struct dw_mci *host = slot->host;
>> + struct starfive_priv *priv = host->priv;
>> + int rise_point = -1, fall_point = -1;
>> + int err, prev_err;
>> + int i;
>> + bool found = 0;
>> + u32 regval;
>> +
>> + /*
>> + * Use grade as the max delay chain, and use the rise_point and
>> + * fall_point to ensure the best sampling point of a data input
>> + * signals.
>> + */
>> + for (i = 0; i < grade; i++) {
>> + regval = i << priv->syscon_shift;
>> + err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
>> + priv->syscon_mask, regval);
>> + if (err)
>> + return err;
>> + mci_writel(host, RINTSTS, ALL_INT_CLR);
>> +
>> + err = mmc_send_tuning(slot->mmc, opcode, NULL);
>> + if (!err)
>> + found = 1;
>> +
>> + if (i > 0) {
>> + if (err && !prev_err)
>> + fall_point = i - 1;
>> + if (!err && prev_err)
>> + rise_point = i;
>> + }
>> +
>> + if (rise_point != -1 && fall_point != -1)
>> + goto tuning_out;
>> +
>> + prev_err = err;
>> + err = 0;
>> + }
>> +
>> +tuning_out:
>> + if (found) {
>> + if (rise_point == -1)
>> + rise_point = 0;
>> + if (fall_point == -1)
>> + fall_point = grade - 1;
>> + if (fall_point < rise_point) {
>> + if ((rise_point + fall_point) >
>> + (grade - 1))
>> + i = fall_point / 2;
>> + else
>> + i = (rise_point + grade - 1) / 2;
>> + } else {
>> + i = (rise_point + fall_point) / 2;
>> + }
>> +
>> + regval = i << priv->syscon_shift;
>> + err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
>> + priv->syscon_mask, regval);
>> + if (err)
>> + return err;
>> + mci_writel(host, RINTSTS, ALL_INT_CLR);
>> +
>> + dev_info(host->dev, "Found valid delay chain! use it
>> [delay=%d]\n", i);
>> + } else {
>> + dev_err(host->dev, "No valid delay chain! use default\n");
>> + err = -EINVAL;
>> + }
>> +
>> + mci_writel(host, RINTSTS, ALL_INT_CLR);
>> + return err;
>> +}
>> +
>> +static int dw_mci_starfive_parse_dt(struct dw_mci *host)
>> +{
>> + struct of_phandle_args args;
>> + struct starfive_priv *priv;
>> + int ret;
>> +
>> + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + ret = of_parse_phandle_with_fixed_args(host->dev->of_node,
>> + "starfive,sysreg", 3, 0, &args);
>> + if (ret) {
>> + dev_err(host->dev, "Failed to parse starfive,sysreg\n");
>> + return -EINVAL;
>> + }
>> +
>> + priv->reg_syscon = syscon_node_to_regmap(args.np);
>> + of_node_put(args.np);
>> + if (IS_ERR(priv->reg_syscon))
>> + return PTR_ERR(priv->reg_syscon);
>> +
>> + priv->syscon_offset = args.args[0];
>> + priv->syscon_shift = args.args[1];
>> + priv->syscon_mask = args.args[2];
>> +
>> + host->priv = priv;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dw_mci_drv_data starfive_data = {
>> + .common_caps = MMC_CAP_CMD23,
>> + .set_ios = dw_mci_starfive_set_ios,
>> + .parse_dt = dw_mci_starfive_parse_dt,
>> + .execute_tuning = dw_mci_starfive_execute_tuning,
>> +};
>> +
>> +static const struct of_device_id dw_mci_starfive_match[] = {
>> + { .compatible = "starfive,jh7110-mmc",
>> + .data = &starfive_data },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, dw_mci_starfive_match);
>> +
>> +static int dw_mci_starfive_probe(struct platform_device *pdev)
>> +{
>> + return dw_mci_pltfm_register(pdev, &starfive_data);
>> +}
>> +
>> +static struct platform_driver dw_mci_starfive_driver = {
>> + .probe = dw_mci_starfive_probe,
>> + .remove = dw_mci_pltfm_remove,
>> + .driver = {
>> + .name = "dwmmc_starfive",
>> + .probe_type = PROBE_PREFER_ASYNCHRONOUS,
>> + .of_match_table = dw_mci_starfive_match,
>> + },
>> +};
>> +module_platform_driver(dw_mci_starfive_driver);
>> +
>> +MODULE_DESCRIPTION("StarFive JH7110 Specific DW-MSHC Driver
>> Extension");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:dwmmc_starfive");
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_0xE3520CC91929C8E7.asc
Type: application/pgp-keys
Size: 6868 bytes
Desc: OpenPGP public key
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230329/939571ec/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230329/939571ec/attachment.sig>
More information about the linux-riscv
mailing list