[PATCH 18/21] ARM: drop SMP support for ARM11MPCore
Arnd Bergmann
arnd at kernel.org
Mon Mar 27 05:13:14 PDT 2023
From: Arnd Bergmann <arnd at arndb.de>
The cache management operations for noncoherent DMA on ARMv6 work
in two different ways:
* When CONFIG_DMA_CACHE_RWFO is set, speculative prefetches on in-flight
DMA buffers lead to data corruption when the prefetched data is written
back on top of data from the device.
* When CONFIG_DMA_CACHE_RWFO is disabled, a cache flush on one CPU
is not seen by the other core(s), leading to inconsistent contents
accross the system.
As a consequence, neither configuration is actually safe to use in a
general-purpose kernel that is used on both MPCore systems and ARM1176
with prefetching enabled.
We could add further workarounds to make the behavior more dynamic based
on the system, but realistically, there are close to zero remaining
users on any ARM11MPCore anyway, and nobody seems too interested in it,
compared to the more popular ARM1176 used in BMC2835 and AST2500.
The Oxnas platform has some minimal support in OpenWRT, but most of the
drivers and dts files never made it into the mainline kernel, while the
Arm Versatile/Realview platform mainly serves as a reference system but
is not necessary to be kept working once all other ARM11MPCore are gone.
Take the easy way out here and drop support for multiprocessing on
ARMv6, along with the CONFIG_DMA_CACHE_RWFO option and the cache
management implementation for it. This also helps with other ARMv6
issues, but for the moment leaves the ability to build a kernel that
can run on both ARMv7 SMP and single-processor ARMv6, which we probably
want to stop supporting as well, but not as part of this series.
Cc: Neil Armstrong <neil.armstrong at linaro.org>
Cc: Daniel Golle <daniel at makrotopia.org>
Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: linux-oxnas at groups.io
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
I could use some help clarifying the above changelog text to describe
the exact problem, and how the CONFIG_DMA_CACHE_RWFO actually works on
MPCore. The TRMs for both 1176 and 11MPCore only describe prefetching
into the instruction cache, not the data cache, but this can end up in
the outercache as a result. The 1176 has some extra control bits to
control prefetching, but I found no reference that explains why an
MPCore does not run into the problem.
---
arch/arm/mach-oxnas/Kconfig | 4 -
arch/arm/mach-oxnas/Makefile | 1 -
arch/arm/mach-oxnas/headsmp.S | 23 ------
arch/arm/mach-oxnas/platsmp.c | 96 ----------------------
arch/arm/mach-versatile/platsmp-realview.c | 4 -
arch/arm/mm/Kconfig | 19 -----
arch/arm/mm/cache-v6.S | 31 -------
7 files changed, 178 deletions(-)
delete mode 100644 arch/arm/mach-oxnas/headsmp.S
delete mode 100644 arch/arm/mach-oxnas/platsmp.c
diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
index a9ded7079268..a054235c3d6c 100644
--- a/arch/arm/mach-oxnas/Kconfig
+++ b/arch/arm/mach-oxnas/Kconfig
@@ -28,10 +28,6 @@ config MACH_OX820
bool "Support OX820 Based Products"
depends on ARCH_MULTI_V6
select ARM_GIC
- select DMA_CACHE_RWFO if SMP
- select HAVE_SMP
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
help
Include Support for the Oxford Semiconductor OX820 SoC Based Products.
diff --git a/arch/arm/mach-oxnas/Makefile b/arch/arm/mach-oxnas/Makefile
index 0e78ecfe6c49..a4e40e534e6a 100644
--- a/arch/arm/mach-oxnas/Makefile
+++ b/arch/arm/mach-oxnas/Makefile
@@ -1,2 +1 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/arch/arm/mach-oxnas/headsmp.S b/arch/arm/mach-oxnas/headsmp.S
deleted file mode 100644
index 9c0f1479f33a..000000000000
--- a/arch/arm/mach-oxnas/headsmp.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2013 Ma Haijun <mahaijuns at gmail.com>
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- __INIT
-
-/*
- * OX820 specific entry point for secondary CPUs.
- */
-ENTRY(ox820_secondary_startup)
- mov r4, #0
- /* invalidate both caches and branch target cache */
- mcr p15, 0, r4, c7, c7, 0
- /*
- * we've been released from the holding pen: secondary_stack
- * should now contain the SVC stack for this core
- */
- b secondary_startup
diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c
deleted file mode 100644
index f0a50b9e61df..000000000000
--- a/arch/arm/mach-oxnas/platsmp.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Neil Armstrong <narmstrong at baylibre.com>
- * Copyright (C) 2013 Ma Haijun <mahaijuns at gmail.com>
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- */
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-
-extern void ox820_secondary_startup(void);
-
-static void __iomem *cpu_ctrl;
-static void __iomem *gic_cpu_ctrl;
-
-#define HOLDINGPEN_CPU_OFFSET 0xc8
-#define HOLDINGPEN_LOCATION_OFFSET 0xc4
-
-#define GIC_NCPU_OFFSET(cpu) (0x100 + (cpu)*0x100)
-#define GIC_CPU_CTRL 0x00
-#define GIC_CPU_CTRL_ENABLE 1
-
-static int __init ox820_boot_secondary(unsigned int cpu,
- struct task_struct *idle)
-{
- /*
- * Write the address of secondary startup into the
- * system-wide flags register. The BootMonitor waits
- * until it receives a soft interrupt, and then the
- * secondary CPU branches to this address.
- */
- writel(virt_to_phys(ox820_secondary_startup),
- cpu_ctrl + HOLDINGPEN_LOCATION_OFFSET);
-
- writel(cpu, cpu_ctrl + HOLDINGPEN_CPU_OFFSET);
-
- /*
- * Enable GIC cpu interface in CPU Interface Control Register
- */
- writel(GIC_CPU_CTRL_ENABLE,
- gic_cpu_ctrl + GIC_NCPU_OFFSET(cpu) + GIC_CPU_CTRL);
-
- /*
- * Send the secondary CPU a soft interrupt, thereby causing
- * the boot monitor to read the system wide flags register,
- * and branch to the address found there.
- */
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
- return 0;
-}
-
-static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
-{
- struct device_node *np;
- void __iomem *scu_base;
-
- np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-scu");
- scu_base = of_iomap(np, 0);
- of_node_put(np);
- if (!scu_base)
- return;
-
- /* Remap CPU Interrupt Interface Registers */
- np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-gic");
- gic_cpu_ctrl = of_iomap(np, 1);
- of_node_put(np);
- if (!gic_cpu_ctrl)
- goto unmap_scu;
-
- np = of_find_compatible_node(NULL, NULL, "oxsemi,ox820-sys-ctrl");
- cpu_ctrl = of_iomap(np, 0);
- of_node_put(np);
- if (!cpu_ctrl)
- goto unmap_scu;
-
- scu_enable(scu_base);
- flush_cache_all();
-
-unmap_scu:
- iounmap(scu_base);
-}
-
-static const struct smp_operations ox820_smp_ops __initconst = {
- .smp_prepare_cpus = ox820_smp_prepare_cpus,
- .smp_boot_secondary = ox820_boot_secondary,
-};
-
-CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops);
diff --git a/arch/arm/mach-versatile/platsmp-realview.c b/arch/arm/mach-versatile/platsmp-realview.c
index 5d363385c801..fa31fd2d211d 100644
--- a/arch/arm/mach-versatile/platsmp-realview.c
+++ b/arch/arm/mach-versatile/platsmp-realview.c
@@ -18,16 +18,12 @@
#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30
static const struct of_device_id realview_scu_match[] = {
- { .compatible = "arm,arm11mp-scu", },
{ .compatible = "arm,cortex-a9-scu", },
{ .compatible = "arm,cortex-a5-scu", },
{ }
};
static const struct of_device_id realview_syscon_match[] = {
- { .compatible = "arm,core-module-integrator", },
- { .compatible = "arm,realview-eb-syscon", },
- { .compatible = "arm,realview-pb11mp-syscon", },
{ .compatible = "arm,realview-pbx-syscon", },
{ },
};
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c5bbae86f725..16b62bc0a970 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -937,25 +937,6 @@ config VDSO
You must have glibc 2.22 or later for programs to seamlessly
take advantage of this.
-config DMA_CACHE_RWFO
- bool "Enable read/write for ownership DMA cache maintenance"
- depends on CPU_V6K && SMP
- default y
- help
- The Snoop Control Unit on ARM11MPCore does not detect the
- cache maintenance operations and the dma_{map,unmap}_area()
- functions may leave stale cache entries on other CPUs. By
- enabling this option, Read or Write For Ownership in the ARMv6
- DMA cache maintenance functions is performed. These LDR/STR
- instructions change the cache line state to shared or modified
- so that the cache operation has the desired effect.
-
- Note that the workaround is only valid on processors that do
- not perform speculative loads into the D-cache. For such
- processors, if cache maintenance operations are not broadcast
- in hardware, other workarounds are needed (e.g. cache
- maintenance broadcasting in software via FIQ).
-
config OUTER_CACHE
bool
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index abae7ff5defc..f6ee53c1de20 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -201,10 +201,6 @@ ENTRY(v6_flush_kern_dcache_area)
* - end - virtual end address of region
*/
ENTRY(v6_dma_inv_range)
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldrb r2, [r0] @ read for ownership
- strb r2, [r0] @ write for ownership
-#endif
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
@@ -213,10 +209,6 @@ ENTRY(v6_dma_inv_range)
mcrne p15, 0, r0, c7, c11, 1 @ clean unified line
#endif
tst r1, #D_CACHE_LINE_SIZE - 1
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldrbne r2, [r1, #-1] @ read for ownership
- strbne r2, [r1, #-1] @ write for ownership
-#endif
bic r1, r1, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line
@@ -231,10 +223,6 @@ ENTRY(v6_dma_inv_range)
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldrlo r2, [r0] @ read for ownership
- strlo r2, [r0] @ write for ownership
-#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
@@ -248,9 +236,6 @@ ENTRY(v6_dma_inv_range)
ENTRY(v6_dma_clean_range)
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
-#endif
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 1 @ clean D line
#else
@@ -269,10 +254,6 @@ ENTRY(v6_dma_clean_range)
* - end - virtual end address of region
*/
ENTRY(v6_dma_flush_range)
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldrb r2, [r0] @ read for ownership
- strb r2, [r0] @ write for ownership
-#endif
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
#ifdef HARVARD_CACHE
@@ -282,10 +263,6 @@ ENTRY(v6_dma_flush_range)
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldrblo r2, [r0] @ read for ownership
- strblo r2, [r0] @ write for ownership
-#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
@@ -301,13 +278,7 @@ ENTRY(v6_dma_map_area)
add r1, r1, r0
teq r2, #DMA_FROM_DEVICE
beq v6_dma_inv_range
-#ifndef CONFIG_DMA_CACHE_RWFO
b v6_dma_clean_range
-#else
- teq r2, #DMA_TO_DEVICE
- beq v6_dma_clean_range
- b v6_dma_flush_range
-#endif
ENDPROC(v6_dma_map_area)
/*
@@ -317,11 +288,9 @@ ENDPROC(v6_dma_map_area)
* - dir - DMA direction
*/
ENTRY(v6_dma_unmap_area)
-#ifndef CONFIG_DMA_CACHE_RWFO
add r1, r1, r0
teq r2, #DMA_TO_DEVICE
bne v6_dma_inv_range
-#endif
ret lr
ENDPROC(v6_dma_unmap_area)
--
2.39.2
More information about the linux-riscv
mailing list