[PATCH 15/21] ARM: dma-mapping: always invalidate WT caches before DMA
Arnd Bergmann
arnd at kernel.org
Mon Mar 27 05:13:11 PDT 2023
From: Arnd Bergmann <arnd at arndb.de>
Most ARM CPUs can have write-back caches and that require
cache management to be done in the dma_sync_*_for_device()
operation. This is typically done in both writeback and
writethrough mode.
The cache-v4.S (arm720/740/7tdmi/9tdmi) and cache-v4wt.S
(arm920t, arm940t) implementations are the exception here,
and only do the cache management after the DMA is complete,
in the dma_sync_*_for_cpu() operation.
Change this for consistency with the other platforms. This
should have no user visible effect.
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
arch/arm/mm/cache-v4.S | 8 ++++----
arch/arm/mm/cache-v4wt.S | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 7787057e4990..e2b104876340 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -117,23 +117,23 @@ ENTRY(v4_dma_flush_range)
ret lr
/*
- * dma_unmap_area(start, size, dir)
+ * dma_map_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
-ENTRY(v4_dma_unmap_area)
+ENTRY(v4_dma_map_area)
teq r2, #DMA_TO_DEVICE
bne v4_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_map_area(start, size, dir)
+ * dma_unmap_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
-ENTRY(v4_dma_map_area)
+ENTRY(v4_dma_unmap_area)
ret lr
ENDPROC(v4_dma_unmap_area)
ENDPROC(v4_dma_map_area)
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 0b290c25a99d..652218752f88 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -172,24 +172,24 @@ v4wt_dma_inv_range:
.equ v4wt_dma_flush_range, v4wt_dma_inv_range
/*
- * dma_unmap_area(start, size, dir)
+ * dma_map_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
-ENTRY(v4wt_dma_unmap_area)
+ENTRY(v4wt_dma_map_area)
add r1, r1, r0
teq r2, #DMA_TO_DEVICE
bne v4wt_dma_inv_range
/* FALLTHROUGH */
/*
- * dma_map_area(start, size, dir)
+ * dma_unmap_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
-ENTRY(v4wt_dma_map_area)
+ENTRY(v4wt_dma_unmap_area)
ret lr
ENDPROC(v4wt_dma_unmap_area)
ENDPROC(v4wt_dma_map_area)
--
2.39.2
More information about the linux-riscv
mailing list