[PATCH v6 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC
Conor Dooley
conor at kernel.org
Tue Mar 21 16:03:54 PDT 2023
Emil,
I tried messaging you on IRC yesterday, but message probably got lost in
the ether :(
On Mon, Mar 20, 2023 at 06:37:29PM +0800, Hal Feng wrote:
> This patch series adds basic clock, reset & DT support for StarFive
> JH7110 SoC.
Are you happy with how the series looks now and if so, how do you want
to go about getting it applied?
To me, what'd seem ideal, is a branch that starts w/ the two binding
changes for clock and reset so that that bit can be shared between
clock/reset drivers and dts bits.
Since, I, at least, am happy with the dts since of things, I've gone and
created such a branch with the dt-bindings at the start, followed by the
dts bits, and pushed it here:
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/log/?h=riscv-jh7110_initial_dts
If you're happy on the driver side of things, do you want to pick those
patches up on top of the bindings and send a PR to Stephen?
No rush if you're not, still got a fair bit of time til the merge window
yada-yada & I won't merge this branch into the riscv-dt for-next one
until the bindings are in the clock tree.
Thanks,
Conor.
(I did end up re-creating the first patch on that branch, b4/git am
didn't like the maintainers change, so hopefully I've not made a hames
of it.)
>
> You can simply review or test the patches at the link [1].
>
> [1]: https://github.com/hal-feng/linux/commits/visionfive2-minimal
>
> Changes since v5:
> - Rebased on v6.3-rc3.
> Patch 1:
> - Set obj-y for starfive/ in drivers/clk/Makefile.
> Patch 2:
> - Sorted the StarFive entries alphabetically in MAINTAINERS.
> Patch 3:
> - Fixed the build error which caused by renaming the header without
> changing the users of the header.
> Patch 4:
> - Fixed the errors reported by checkpatch.pl.
> Patch 6:
> - Set obj-y for starfive/ in drivers/reset/Makefile.
> Patch 13:
> - Set the timer clock flags as 0.
>
> v5: https://lore.kernel.org/all/20230311090733.56918-1-hal.feng@starfivetech.com/
>
> Changes since v4:
> - Rebased on v6.3-rc1.
> - Added two patches to replace SOC_STARFIVE with ARCH_STARFIVE.
> - Added Tested-by tag for Tommaso.
> Patch 9:
> - Set GMAC1 related clocks as optional inputs.
> - Dropped PLL clock definitions.
> Patch 10:
> - Set GMAC0 related clocks and RTC oscillator as optional inputs.
> - Sorted the clocks.
> Patch 11:
> - Replaced SOC_STARFIVE with ARCH_STARFIVE.
> - Added macros for PLL clocks and adjusted the code properly to
> make it easier to add the PLL clock driver later.
> - Updated the clock flags.
> Patch 12:
> - Built as a module by default.
> - Sorted the clocks.
> - Updated the clock flags.
> Patch 13:
> - Replaced "default CLK_STARFIVE_JH7110_SYS" with "default ARCH_STARFIVE".
> - Renamed "reset_info" struct to "jh7110_reset_info" and moved its
> definition into the driver.
> - Put jh7110_sys_info and jh7110_sys_info before the probe().
> Patch 17:
> - Dropped "_zicsr" in ISA.
> - Sorted the external clocks alphabetically.
> - Put the ccache node before the plic node according to their addresses.
> - Sorted the clock inputs of the aoncrg node.
> Patch 19:
> - Replaced SOC_STARFIVE with ARCH_STARFIVE.
> - Sorted the nodes alphabetically.
>
> v4: https://lore.kernel.org/all/20230221024645.127922-1-hal.feng@starfivetech.com/
>
> Changes since v3:
> - Suggested by Conor, Merged clock & reset series and DT series together
> so that they could go via the same tree as the dt-binding headers are
> required by both driver & devicetree.
> - Rebased on tag v6.2.
>
> [Clock & reset]
> Patch 2:
> - Split patch 2 into two. One for renaming file and one for renaming
> variables. (by Conor)
> Patch 4:
> - Split patch 4 into two. One for code movement and one for
> extraction. (by Conor)
> Patch 5 & 9 & 10 & 11:
> - Fixed the issues reported by kernel test robot.
> Patch 9:
> - Set (&priv->base) as driver data instead of (priv->base).
> - Set the frequency of clock PLL0 as 1000MHz for Synchronizing with the
> lastest u-boot setting from StarFive. (by Emil)
> - Used devm_kzalloc() instead of kzalloc() when registering aux device.
> Patch 10:
> - Set (&priv->base) as driver data instead of (priv->base).
> Patch 11:
> - Used (*base) to get the register base address instead of (base).
>
> [Device tree]
> - Dropped patch 1, 4, 5 because they were accepted.
> - Added a new patch to add SiFive S7 compatible. (by Conor)
> - Added a new patch to add JH7110 pin function definitions.
> Patch 6:
> - Changed the label "S76_0" to "S7_0" and used compatible "sifive,s7"
> for core 0.
> - Updated ISA of each cores. (by Conor)
> - Made the node names generic. (by Krzysztof)
> - Added clock-output-names for all external clocks.
> - Added i2c0~6 nodes.
> - Changed the node name "gpio" to "pinctrl". Changed the label "gpio"
> and "gpioa" to "sysgpio" and "aongpio". (by Conor)
> Patch 7:
> - Separated the long lines into more lines in Makefile. (by Conor)
> - Renamed jh7110-starfive-visionfive-2-va.dts and
> jh7110-starfive-visionfive-2-vb.dts to
> jh7110-starfive-visionfive-2-v1.2a.dts and
> jh7110-starfive-visionfive-2-v1.3b.dts.
> Changed the model and compatible to match v1.2A and v1.3B which
> are printed on the silkscreen of VisionFive 2 board. (by Emil)
> - Configured pins for i2c0/2/5/6 and enabled them.
>
> clock & reset v3: https://lore.kernel.org/all/20221220005054.34518-1-hal.feng@starfivetech.com/
> DT v3: https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@starfivetech.com/
>
> Changes since v2:
> [Clock & reset]
> - Rebased on tag v6.1.
> - Added "JH71X0" to the StarFive driver headers in MAINTAINERS.
> - Removed Co-developed-by tag of Hal in patch 1 and patch 4.
> - Changed the commit author from Hal to Emil in patch 2 and patch 5.
> Removed Co-developed-by tag of Emil in patch 2 and patch 5. (by Emil)
> - Improved the coding style of patch 11, 12 and 13.
> - Dropped patch 14. (by Emil)
> Patch 4:
> - Passed the "owner" member of reset_controller_dev structure
> directly in reset_starfive_jh7100_register(). (by Emil)
> - Added MAINTAINERS changes.
> Patch 7:
> - Split patch 7 into sys part and aon part. Merged them into patch 9 and
> patch 10 respectively. (by Krzysztof)
> - Renamed include/dt-bindings/clock/starfive-jh7110.h to
> include/dt-bindings/clock/starfive,jh7110-crg.h. (by Krzysztof)
> - Synchronized the definitions with the latest changes from Emil.
> Patch 8:
> - Split patch 8 into sys part and aon part. Merged them into patch 9 and
> patch 10 respectively. (by Krzysztof)
> - Renamed include/dt-bindings/reset/starfive-jh7110.h to
> include/dt-bindings/reset/starfive,jh7110-crg.h. (by Krzysztof)
> - Fixed the date of Copyright. (by Emil)
> - Dropped weird indentations. (by Krzysztof)
> - Synchronized the definitions with the latest changes from Emil.
> Patch 9:
> - Improved the description of clocks. (by Emil and Krzysztof)
> - Added MAINTAINERS changes.
> Patch 10:
> - Improved the description of clocks. (by Emil and Krzysztof)
> - Changed the clock-name "clk_rtc" to "rtc_osc" and "apb_bus_func" to
> "apb_bus".
> Patch 11:
> - Removed the flags of trace/debug clocks and set the flags of core clocks
> as CLK_IS_CRITICAL. (by Emil)
> - Deleted the extra 1-1 clocks and synchronized the clock tree with the
> latest changes from Emil. (by Emil)
> - Selected RESET_STARFIVE_JH7110 in Kconfig option CLK_STARFIVE_JH7110_SYS.
> Patch 12:
> - Changed the macro JH7110_AONCLK_RTC to JH7110_AONCLK_RTC_OSC and
> JH7110_AONCLK_APB_BUS_FUNC to JH7110_AONCLK_APB_BUS.
> - Synchronized the clock tree with the latest changes from Emil.
> - Set the MODULE_LICENSE as "GPL" according to commit bf7fbeeae6db.
> Patch 13:
> - Removed the "asserted" member in reset_info structure and always pass
> NULL when calling reset_starfive_jh71x0_register(). (by Emil)
>
> [Device tree]
> - Rebased on tag v6.1.
> - Dropped patch 8 because it was merged.
> Patch 1:
> - Made the links into "Link:" tags. (by Conor)
> - Corrected the board name to "VisionFive 2" instead of
> "VisionFive V2" and added compatibles for version A and
> version B of VisionFive 2. (by Emil)
> Patch 4:
> - Used "sifive,ccache0" compatible string to match. (by Conor)
> Patch 5:
> - Dropped "select SIFIVE_CCACHE" in config SOC_STARFIVE. (by Conor)
> - Dropped "starfive,jh7110-ccache" compatible in
> drivers/soc/sifive/sifive_ccache.c.
> Patch 6:
> - Removed all "clock-frequency = <0>". (by Conor)
> - Sorted the nodes after their addresses. (by Emil)
> - Renamed "clk_rtc" to "rtc_osc".
> - Added "sifive,ccache0" compatible in the cache-controller node.
> - Renamed "JH7110_SYSCLK_APB_BUS_FUNC" to "JH7110_SYSCLK_APB_BUS" and
> renamed "apb_bus_func" to "apb_bus".
> Renamed "JH7110_SYSCLK_IOMUX" to "JH7110_SYSCLK_IOMUX_APB".
> Renamed "JH7110_SYSRST_IOMUX" to "JH7110_SYSRST_IOMUX_APB".
> Renamed "JH7110_AONRST_AON_IOMUX" to "JH7110_AONRST_IOMUX".
> - Removed "reg-names" in gpio nodes.
> Patch 7:
> - Corrected the board name to "VisionFive 2" instead of "VisionFive V2".
> - Renamed jh7110-starfive-visionfive-v2.dts to
> jh7110-starfive-visionfive-2.dtsi.
> - Added dts for VisionFive 2 version A and version B boards.
> - In the chosen node, deleted "linux,initrd-start" and "linux,initrd-end"
> and changed the value of "stdout-path" to "serial0:115200n8".
> - Changed the bias of uart0 "rx-pins" to
> "bias-disable; /* external pull-up */".
> - Renamed "clk_rtc" to "rtc_osc".
> - Moved the gpio node behind the uart0 node.
>
> clock & reset v2: https://lore.kernel.org/all/20221118010627.70576-1-hal.feng@starfivetech.com/
> DT v2: https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@starfivetech.com/
>
> Changes since v1:
> [Clock & reset]
> - Rebased on tag v6.1-rc5.
> - Rewrote the clock and reset drivers using auxiliary bus framework, so
> patch 8, 9, 15 were dropped and all patches changed a lot. (by Stephen)
> - Split Patch 14 into two patches. One is for factoring out the common
> JH71X0 code, the another one is for renaming. (by Stephen)
> - Created a subdirectory for StarFive reset drivers.
> - Factored out common JH71X0 reset code.
> - Renamed the common clock and reset code from "*starfive*" or
> "*STARFIVE*" to "*jh71x0*" or "*JH71X0*".
> - Combined JH7110 system and always-on clock DT binding headers in one
> file named "include/dt-bindings/clock/starfive-jh7110.h".
> - Renamed clock definitions "JH7110_SYSCLK_PCLK2_MUX_FUNC_PCLK" and
> "JH7110_SYSCLK_U2_PCLK_MUX_PCLK" to "JH7110_SYSCLK_PCLK2_MUX_FUNC" and
> "JH7110_SYSCLK_PCLK2_MUX".
> - Rewrote the DT bindings of clock and reset for using auxiliary bus.
> - Registered an auxiliary device for reset controller in clock drivers.
> - Changed clock names "CODAJ*" and "WAVE*" to "codaj*" and "wave*".
> Changed clock names "u2_pclk_mux_func_pclk" and "u2_pclk_mux_pclk" to
> "pclk2_mux_func" and "pclk2_mux".
> - Changed the flags of clock apb0 and noc_bus_isp_axi to CLK_IS_CRITICAL
> as suggested by StarFive SDK group.
> - Registered clock gmac0_gtxc as a gate clock instead of a div clock
> as suggested by StarFive SDK group.
> - Changed the frequency of clock pll2_out to 1188MHz as suggested by
> StarFive SDK group.
> - Fixed the bug that the clock JH7110_AONCLK_GMAC0_GTXCLK was not handled
> in JH7110 always-on clock driver.
> - Registered the reset driver as an auxiliary driver.
> - Reworded the commit messages.
>
> [Device tree]
> - Rebased on tag v6.1-rc5.
> - Added blank line in patch 1. (by Krzysztof)
> - Rebased patch 4 and 6 on the newest code. (by Conor)
> - Dropped patch 5. (by Conor)
> - Removed the quirk of JH7100 in patch 6, considering this patch series
> should only add support for JH7110.
> - For patch 27, added Co-developed-by tag for Jianlong and me. Renamed
> cpu labels to "S76_0", "U74_*" instead of "cpu*" following the style
> of jh7100.dtsi. Moved all "clock-frequency" properties to the board dts.
> Rewrote clock-controller nodes and deleted reset-controller nodes for
> using auxiliary bus. Rewrote gpio nodes following generic pinctrl
> bindings. Removed the redundant second reset entry of uart nodes.
> - For patch 28, added Co-developed-by tag for Jianlong and me. Added a
> chosen node. Removed reserved-memory node. Added fixed frequency clock
> nodes for overriding the "clock-frequency" properties. Rewrote the gpio
> nodes following generic pinctrl bindings.
> - Dropped patch 30. (by Conor)
> - Reworded the commit messages.
>
> v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/
>
> Emil Renner Berthing (16):
> clk: starfive: Factor out common JH7100 and JH7110 code
> clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
> clk: starfive: Rename "jh7100" to "jh71x0" for the common code
> reset: Create subdirectory for StarFive drivers
> reset: starfive: Factor out common JH71X0 reset code
> reset: starfive: Extract the common JH71X0 reset code
> reset: starfive: Rename "jh7100" to "jh71x0" for the common code
> reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
> dt-bindings: clock: Add StarFive JH7110 system clock and reset
> generator
> dt-bindings: clock: Add StarFive JH7110 always-on clock and reset
> generator
> clk: starfive: Add StarFive JH7110 system clock driver
> clk: starfive: Add StarFive JH7110 always-on clock driver
> dt-bindings: timer: Add StarFive JH7110 clint
> dt-bindings: interrupt-controller: Add StarFive JH7110 plic
> riscv: dts: starfive: Add initial StarFive JH7110 device tree
> riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device
> tree
>
> Hal Feng (4):
> clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
> reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
> reset: starfive: Add StarFive JH7110 reset driver
> dt-bindings: riscv: Add SiFive S7 compatible
>
> Jianlong Huang (1):
> riscv: dts: starfive: Add StarFive JH7110 pin function definitions
>
> .../clock/starfive,jh7110-aoncrg.yaml | 107 +++
> .../clock/starfive,jh7110-syscrg.yaml | 104 +++
> .../sifive,plic-1.0.0.yaml | 1 +
> .../devicetree/bindings/riscv/cpus.yaml | 1 +
> .../bindings/timer/sifive,clint.yaml | 1 +
> MAINTAINERS | 22 +-
> arch/riscv/boot/dts/starfive/Makefile | 6 +-
> arch/riscv/boot/dts/starfive/jh7110-pinfunc.h | 308 ++++++++
> .../jh7110-starfive-visionfive-2-v1.2a.dts | 13 +
> .../jh7110-starfive-visionfive-2-v1.3b.dts | 13 +
> .../jh7110-starfive-visionfive-2.dtsi | 215 ++++++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 509 +++++++++++++
> drivers/clk/Makefile | 2 +-
> drivers/clk/starfive/Kconfig | 33 +-
> drivers/clk/starfive/Makefile | 6 +-
> .../clk/starfive/clk-starfive-jh7100-audio.c | 74 +-
> drivers/clk/starfive/clk-starfive-jh7100.c | 716 +++++-------------
> drivers/clk/starfive/clk-starfive-jh7100.h | 112 ---
> .../clk/starfive/clk-starfive-jh7110-aon.c | 156 ++++
> .../clk/starfive/clk-starfive-jh7110-sys.c | 450 +++++++++++
> drivers/clk/starfive/clk-starfive-jh71x0.c | 383 ++++++++++
> drivers/clk/starfive/clk-starfive-jh71x0.h | 131 ++++
> drivers/reset/Kconfig | 8 +-
> drivers/reset/Makefile | 2 +-
> drivers/reset/reset-starfive-jh7100.c | 173 -----
> drivers/reset/starfive/Kconfig | 20 +
> drivers/reset/starfive/Makefile | 5 +
> .../reset/starfive/reset-starfive-jh7100.c | 74 ++
> .../reset/starfive/reset-starfive-jh7110.c | 70 ++
> .../reset/starfive/reset-starfive-jh71x0.c | 131 ++++
> .../reset/starfive/reset-starfive-jh71x0.h | 14 +
> .../dt-bindings/clock/starfive,jh7110-crg.h | 221 ++++++
> .../dt-bindings/reset/starfive,jh7110-crg.h | 154 ++++
> 33 files changed, 3370 insertions(+), 865 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
> delete mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h
> create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
> create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c
> create mode 100644 drivers/clk/starfive/clk-starfive-jh71x0.c
> create mode 100644 drivers/clk/starfive/clk-starfive-jh71x0.h
> delete mode 100644 drivers/reset/reset-starfive-jh7100.c
> create mode 100644 drivers/reset/starfive/Kconfig
> create mode 100644 drivers/reset/starfive/Makefile
> create mode 100644 drivers/reset/starfive/reset-starfive-jh7100.c
> create mode 100644 drivers/reset/starfive/reset-starfive-jh7110.c
> create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.c
> create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.h
> create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
> create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
>
>
> base-commit: e8d018dd0257f744ca50a729e3d042cf2ec9da65
> --
> 2.38.1
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230321/29741560/attachment.sig>
More information about the linux-riscv
mailing list