[PATCH v6 19/21] riscv: dts: starfive: Add initial StarFive JH7110 device tree
Hal Feng
hal.feng at starfivetech.com
Mon Mar 20 03:37:48 PDT 2023
From: Emil Renner Berthing <kernel at esmil.dk>
Add initial device tree for the JH7110 RISC-V SoC by StarFive
Technology Ltd.
Tested-by: Tommaso Merciai <tomm.merciai at gmail.com>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
Co-developed-by: Jianlong Huang <jianlong.huang at starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang at starfivetech.com>
Co-developed-by: Hal Feng <hal.feng at starfivetech.com>
Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 509 +++++++++++++++++++++++
1 file changed, 509 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..d484ecdf93f7
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel at esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+/ {
+ compatible = "starfive,jh7110";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ S7_0: cpu at 0 {
+ compatible = "sifive,s7", "riscv";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <8192>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <16384>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imac_zba_zbb";
+ tlb-split;
+ status = "disabled";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_1: cpu at 1 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <1>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_2: cpu at 2 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <2>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_3: cpu at 3 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <3>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ U74_4: cpu at 4 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <4>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc_zba_zbb";
+ tlb-split;
+
+ cpu4_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&S7_0>;
+ };
+
+ core1 {
+ cpu = <&U74_1>;
+ };
+
+ core2 {
+ cpu = <&U74_2>;
+ };
+
+ core3 {
+ cpu = <&U74_3>;
+ };
+
+ core4 {
+ cpu = <&U74_4>;
+ };
+ };
+ };
+ };
+
+ gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac0_rgmii_rxin";
+ #clock-cells = <0>;
+ };
+
+ gmac0_rmii_refin: gmac0-rmii-refin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac0_rmii_refin";
+ #clock-cells = <0>;
+ };
+
+ gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac1_rgmii_rxin";
+ #clock-cells = <0>;
+ };
+
+ gmac1_rmii_refin: gmac1-rmii-refin-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "gmac1_rmii_refin";
+ #clock-cells = <0>;
+ };
+
+ i2srx_bclk_ext: i2srx-bclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2srx_bclk_ext";
+ #clock-cells = <0>;
+ };
+
+ i2srx_lrck_ext: i2srx-lrck-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2srx_lrck_ext";
+ #clock-cells = <0>;
+ };
+
+ i2stx_bclk_ext: i2stx-bclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2stx_bclk_ext";
+ #clock-cells = <0>;
+ };
+
+ i2stx_lrck_ext: i2stx-lrck-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "i2stx_lrck_ext";
+ #clock-cells = <0>;
+ };
+
+ mclk_ext: mclk-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "mclk_ext";
+ #clock-cells = <0>;
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc";
+ #clock-cells = <0>;
+ };
+
+ rtc_osc: rtc-oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "rtc_osc";
+ #clock-cells = <0>;
+ };
+
+ tdm_ext: tdm-ext-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "tdm_ext";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clint: timer at 2000000 {
+ compatible = "starfive,jh7110-clint", "sifive,clint0";
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>;
+ };
+
+ ccache: cache-controller at 2010000 {
+ compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
+ reg = <0x0 0x2010000 0x0 0x4000>;
+ interrupts = <1>, <3>, <4>, <2>;
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <2097152>;
+ cache-unified;
+ };
+
+ plic: interrupt-controller at c000000 {
+ compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ riscv,ndev = <136>;
+ };
+
+ uart0: serial at 10000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10000000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
+ <&syscrg JH7110_SYSCLK_UART0_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+ interrupts = <32>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart1: serial at 10010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10010000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
+ <&syscrg JH7110_SYSCLK_UART1_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+ interrupts = <33>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial at 10020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10020000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
+ <&syscrg JH7110_SYSCLK_UART2_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+ interrupts = <34>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c at 10030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10030000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C0_APB>;
+ interrupts = <35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 10040000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C1_APB>;
+ interrupts = <36>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 10050000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x10050000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C2_APB>;
+ interrupts = <37>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart3: serial at 12000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12000000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
+ <&syscrg JH7110_SYSCLK_UART3_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+ interrupts = <45>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial at 12010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12010000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
+ <&syscrg JH7110_SYSCLK_UART4_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+ interrupts = <46>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial at 12020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12020000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
+ <&syscrg JH7110_SYSCLK_UART5_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+ interrupts = <47>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at 12030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12030000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C3_APB>;
+ interrupts = <48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at 12040000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C4_APB>;
+ interrupts = <49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at 12050000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12050000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C5_APB>;
+ interrupts = <50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c at 12060000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x12060000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>;
+ clock-names = "ref";
+ resets = <&syscrg JH7110_SYSRST_I2C6_APB>;
+ interrupts = <51>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ syscrg: clock-controller at 13020000 {
+ compatible = "starfive,jh7110-syscrg";
+ reg = <0x0 0x13020000 0x0 0x10000>;
+ clocks = <&osc>, <&gmac1_rmii_refin>,
+ <&gmac1_rgmii_rxin>,
+ <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+ <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+ <&tdm_ext>, <&mclk_ext>;
+ clock-names = "osc", "gmac1_rmii_refin",
+ "gmac1_rgmii_rxin",
+ "i2stx_bclk_ext", "i2stx_lrck_ext",
+ "i2srx_bclk_ext", "i2srx_lrck_ext",
+ "tdm_ext", "mclk_ext";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ sysgpio: pinctrl at 13040000 {
+ compatible = "starfive,jh7110-sys-pinctrl";
+ reg = <0x0 0x13040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>;
+ resets = <&syscrg JH7110_SYSRST_IOMUX_APB>;
+ interrupts = <86>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ aoncrg: clock-controller at 17000000 {
+ compatible = "starfive,jh7110-aoncrg";
+ reg = <0x0 0x17000000 0x0 0x10000>;
+ clocks = <&osc>, <&gmac0_rmii_refin>,
+ <&gmac0_rgmii_rxin>,
+ <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+ <&syscrg JH7110_SYSCLK_APB_BUS>,
+ <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+ <&rtc_osc>;
+ clock-names = "osc", "gmac0_rmii_refin",
+ "gmac0_rgmii_rxin", "stg_axiahb",
+ "apb_bus", "gmac0_gtxclk",
+ "rtc_osc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ aongpio: pinctrl at 17020000 {
+ compatible = "starfive,jh7110-aon-pinctrl";
+ reg = <0x0 0x17020000 0x0 0x10000>;
+ resets = <&aoncrg JH7110_AONRST_IOMUX>;
+ interrupts = <85>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+};
--
2.38.1
More information about the linux-riscv
mailing list