[PATCH v6 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE

[Hal Feng]

Using ARCH_FOO symbol is preferred than SOC_FOO.
Set obj-y for starfive/ in Makefile, so the StarFive drivers
can be compiled with COMPILE_TEST=y but ARCH_STARFIVE=n.

Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
---
 drivers/clk/Makefile         | 2 +-
 drivers/clk/starfive/Kconfig | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e3ca0d058a25..3bed88d67a3a 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -117,7 +117,7 @@ obj-$(CONFIG_PLAT_SPEAR)		+= spear/
 obj-y					+= sprd/
 obj-$(CONFIG_ARCH_STI)			+= st/
 obj-$(CONFIG_ARCH_STM32)		+= stm32/
-obj-$(CONFIG_SOC_STARFIVE)		+= starfive/
+obj-y					+= starfive/
 obj-$(CONFIG_ARCH_SUNXI)		+= sunxi/
 obj-y					+= sunxi-ng/
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 003bd2d56ce7..ef3517f4a276 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -2,8 +2,8 @@
 
 config CLK_STARFIVE_JH7100
 	bool "StarFive JH7100 clock support"
-	depends on SOC_STARFIVE || COMPILE_TEST
-	default SOC_STARFIVE
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	default ARCH_STARFIVE
 	help
 	  Say yes here to support the clock controller on the StarFive JH7100
 	  SoC.
@@ -11,7 +11,7 @@ config CLK_STARFIVE_JH7100
 config CLK_STARFIVE_JH7100_AUDIO
 	tristate "StarFive JH7100 audio clock support"
 	depends on CLK_STARFIVE_JH7100
-	default m if SOC_STARFIVE
+	default m if ARCH_STARFIVE
 	help
 	  Say Y or M here to support the audio clocks on the StarFive JH7100
 	  SoC.
-- 
2.38.1