[PATCH v3 4/5] usb: cdns3: add StarFive JH7110 USB driver.

Peter Chen peter.chen at kernel.org
Wed Mar 15 19:46:52 PDT 2023


On 23-03-15 18:44:10, Minda Chen wrote:
> There is a Cadence USB3 core for JH7110 SoCs, the cdns
> core is the child of this USB wrapper module device.
> 
> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> ---
>  MAINTAINERS                        |   7 +
>  drivers/usb/cdns3/Kconfig          |  11 ++
>  drivers/usb/cdns3/Makefile         |   1 +
>  drivers/usb/cdns3/cdns3-starfive.c | 305 +++++++++++++++++++++++++++++
>  4 files changed, 324 insertions(+)
>  create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4263c005e45c..c530c966ab26 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19985,6 +19985,13 @@ F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb-pcie-phy.yaml
>  F:	drivers/phy/starfive/phy-jh7110-pcie.c
>  F:	drivers/phy/starfive/phy-jh7110-usb.c
>  
> +STARFIVE JH71X0 USB DRIVERS
> +M:	Emil Renner Berthing <kernel at esmil.dk>
> +M:	Minda Chen <minda.chen at starfivetech.com>
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
> +F:	drivers/usb/cdns3/cdns3-starfive.c
> +
>  STATIC BRANCH/CALL
>  M:	Peter Zijlstra <peterz at infradead.org>
>  M:	Josh Poimboeuf <jpoimboe at kernel.org>
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> index b98ca0a1352a..0a514b591527 100644
> --- a/drivers/usb/cdns3/Kconfig
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -78,6 +78,17 @@ config USB_CDNS3_IMX
>  
>  	  For example, imx8qm and imx8qxp.
>  
> +config USB_CDNS3_STARFIVE
> +	tristate "Cadence USB3 support on StarFive SoC platforms"
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	help
> +	  Say 'Y' or 'M' here if you are building for StarFive SoCs
> +	  platforms that contain Cadence USB3 controller core.
> +
> +	  e.g. JH7110.
> +
> +	  If you choose to build this driver as module it will
> +	  be dynamically linked and module will be called cdns3-starfive.ko
>  endif
>  
>  if USB_CDNS_SUPPORT
> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
> index 61edb2f89276..48dfae75b5aa 100644
> --- a/drivers/usb/cdns3/Makefile
> +++ b/drivers/usb/cdns3/Makefile
> @@ -24,6 +24,7 @@ endif
>  obj-$(CONFIG_USB_CDNS3_PCI_WRAP)		+= cdns3-pci-wrap.o
>  obj-$(CONFIG_USB_CDNS3_TI)			+= cdns3-ti.o
>  obj-$(CONFIG_USB_CDNS3_IMX)			+= cdns3-imx.o
> +obj-$(CONFIG_USB_CDNS3_STARFIVE)		+= cdns3-starfive.o
>  
>  cdnsp-udc-pci-y					:= cdnsp-pci.o
>  
> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
> new file mode 100644
> index 000000000000..a99f98f85235
> --- /dev/null
> +++ b/drivers/usb/cdns3/cdns3-starfive.c
> @@ -0,0 +1,305 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
> + *
> + * Copyright (C) 2022 Starfive, Inc.
> + * Author:	Yanhong Wang <yanhong.wang at starfivetech.com>
> + * Author:	Mason Huo <mason.huo at starfivetech.com>
> + * Author:	Minda Chen <minda.chen at starfivetech.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <linux/usb/otg.h>
> +#include "core.h"
> +
> +#define USB_STRAP_HOST			BIT(17)
> +#define USB_STRAP_DEVICE		BIT(18)
> +#define USB_STRAP_MASK			GENMASK(18, 16)
> +
> +#define USB_SUSPENDM_HOST		BIT(19)
> +#define USB_SUSPENDM_MASK		BIT(19)
> +
> +#define USB_SUSPENDM_BYPS		BIT(20)
> +#define USB_REFCLK_MODE			BIT(23)
> +#define USB_PLL_EN			BIT(22)
> +#define USB_PDRSTN_SPLIT		BIT(17)
> +
> +#define PCIE_CKREF_SRC_MASK		GENMASK(19, 18)
> +#define PCIE_CLK_SEL_MASK		GENMASK(21, 20)
> +#define PCIE_PHY_MODE			BIT(20)
> +#define PCIE_PHY_MODE_MASK		GENMASK(21, 20)
> +#define PCIE_USB3_BUS_WIDTH_MASK	GENMASK(3, 2)
> +#define PCIE_USB3_RATE_MASK		GENMASK(6, 5)
> +#define PCIE_USB3_RX_STANDBY_MASK	BIT(7)
> +#define PCIE_USB3_PHY_ENABLE		BIT(4)
> +
> +struct cdns_starfive {
> +	struct device *dev;
> +	struct regmap *stg_syscon;
> +	struct regmap *sys_syscon;
> +	struct reset_control *resets;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	u32 sys_offset;
> +	u32 stg_offset_4;
> +	u32 stg_offset_196;
> +	u32 stg_offset_328;
> +	u32 stg_offset_500;
> +	bool usb2_only;
> +};
> +
> +static int cdns_mode_init(struct platform_device *pdev,
> +				struct cdns_starfive *data, const char **out_mode)
> +{
> +	struct device_node *child;
> +	const char *dr_mode = NULL;
> +
> +	child = of_get_compatible_child(pdev->dev.of_node, "cdns,usb3");
> +	if (!child) {
> +		return dev_err_probe(&pdev->dev, -ENODEV,
> +			"Failed to find child node\n");
> +	}
> +
> +	/* Init usb 2.0 utmi phy */
> +	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> +		USB_SUSPENDM_BYPS, USB_SUSPENDM_BYPS);
> +	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> +		USB_PLL_EN, USB_PLL_EN);
> +	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> +		USB_REFCLK_MODE, USB_REFCLK_MODE);
> +
> +	if (!of_find_property(child, "cdns3,usb3-phy", NULL)) {
> +		/* Disconnect usb 3.0 phy mode */
> +		regmap_update_bits(data->sys_syscon, data->sys_offset,
> +			USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
> +		data->usb2_only = 1;
> +	} else {
> +		/* Config usb 3.0 pipe phy */
> +		regmap_update_bits(data->stg_syscon, data->stg_offset_196,
> +			PCIE_CKREF_SRC_MASK, 0);
> +		regmap_update_bits(data->stg_syscon, data->stg_offset_196,
> +			PCIE_CLK_SEL_MASK, 0);
> +		regmap_update_bits(data->stg_syscon, data->stg_offset_328,
> +			PCIE_PHY_MODE_MASK, PCIE_PHY_MODE);
> +		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
> +			PCIE_USB3_BUS_WIDTH_MASK, 0);
> +		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
> +			PCIE_USB3_RATE_MASK, 0);
> +		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
> +			PCIE_USB3_RX_STANDBY_MASK, 0);
> +		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
> +			PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE);
> +
> +		/* Connect usb 3.0 phy mode */
> +		regmap_update_bits(data->sys_syscon, data->sys_offset,
> +			USB_PDRSTN_SPLIT, 0);
> +	}
> +
> +	if (!of_property_read_string(child, "dr_mode", &dr_mode)) {
> +		if (!strcmp(dr_mode, "host")) {
> +			regmap_update_bits(data->stg_syscon,
> +				data->stg_offset_4,
> +				USB_STRAP_MASK,
> +				USB_STRAP_HOST);
> +			regmap_update_bits(data->stg_syscon,
> +				data->stg_offset_4,
> +				USB_SUSPENDM_MASK,
> +				USB_SUSPENDM_HOST);
> +		} else if (!strcmp(dr_mode, "peripheral")) {
> +			regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> +				USB_STRAP_MASK, USB_STRAP_DEVICE);
> +			regmap_update_bits(data->stg_syscon, data->stg_offset_4,
> +				USB_SUSPENDM_MASK, 0);
> +		}
> +	}
> +
> +	if (out_mode)
> +		*out_mode = dr_mode;
> +
> +	return 0;
> +}
> +
> +static int cdns_clk_rst_init(struct cdns_starfive *data)
> +{
> +	int ret;
> +
> +	data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
> +	if (data->num_clks < 0)
> +		return dev_err_probe(data->dev, -ENODEV,
> +			"Failed to get clocks\n");
> +
> +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
> +	if (ret)
> +		return dev_err_probe(data->dev, ret,
> +			"failed to enable clocks\n");
> +
> +	data->resets = devm_reset_control_array_get_exclusive(data->dev);
> +	if (IS_ERR(data->resets)) {
> +		ret = dev_err_probe(data->dev, PTR_ERR(data->resets),
> +			"Failed to get resets");
> +		goto err_clk_init;
> +	}
> +
> +	ret = reset_control_deassert(data->resets);
> +	if (ret) {
> +		ret = dev_err_probe(data->dev, ret,
> +			"failed to reset clocks\n");
> +		goto err_clk_init;
> +	}
> +
> +	return ret;
> +
> +err_clk_init:
> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
> +	return ret;
> +}
> +
> +static int cdns_starfive_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *node = pdev->dev.of_node;
> +	struct cdns_starfive *data;
> +	unsigned int args[4];
> +	const char *dr_mode;
> +	int ret;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, data);
> +
> +	data->dev = dev;
> +
> +	data->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
> +		"starfive,stg-syscon", 4, args);
> +
> +	if (IS_ERR(data->stg_syscon))
> +		return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
> +			"Failed to parse starfive,stg-syscon\n");
> +
> +	data->stg_offset_4 = args[0];
> +	data->stg_offset_196 = args[1];
> +	data->stg_offset_328 = args[2];
> +	data->stg_offset_500 = args[3];
> +
> +	data->sys_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
> +		"starfive,sys-syscon", 1, args);
> +	if (IS_ERR(data->sys_syscon))
> +		return dev_err_probe(dev, PTR_ERR(data->sys_syscon),
> +			"Failed to parse starfive,sys-syscon\n");
> +
> +	data->sys_offset = args[0];
> +
> +	ret = cdns_mode_init(pdev, data, &dr_mode);
> +	if (ret)
> +		return ret;
> +
> +	ret = cdns_clk_rst_init(data);
> +	if (ret)
> +		return ret;
> +
> +	ret = of_platform_populate(node, NULL, NULL, dev);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to create children\n");
> +
> +	device_set_wakeup_capable(dev, true);
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> +
> +	dev_info(dev, "usb mode %s %s probe success\n",
> +		dr_mode ? dr_mode : "unknown", data->usb2_only ? "2.0" : "3.0");
> +
> +	return 0;
> +}
> +
> +static int cdns_starfive_remove_core(struct device *dev, void *c)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +
> +	platform_device_unregister(pdev);
> +
> +	return 0;
> +}
> +
> +static int cdns_starfive_remove(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct cdns_starfive *data = dev_get_drvdata(dev);
> +
> +	pm_runtime_get_sync(dev);
> +	device_for_each_child(dev, NULL, cdns_starfive_remove_core);
> +
> +	reset_control_assert(data->resets);
> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
> +	pm_runtime_disable(dev);
> +	pm_runtime_put_noidle(dev);
> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int cdns_starfive_resume(struct device *dev)
> +{
> +	struct cdns_starfive *data = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
> +	if (ret)
> +		return ret;
> +
> +	ret = reset_control_deassert(data->resets);
> +	if (ret)
> +		return ret;
> +

So, you clk enable and reset has no sequence requirements? I see the
sequence is not the same between resume and suspend routine.

Peter
> +	return 0;
> +}
> +
> +static int cdns_starfive_suspend(struct device *dev)
> +{
> +	struct cdns_starfive *data = dev_get_drvdata(dev);
> +
> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
> +	reset_control_assert(data->resets);
> +
> +	return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops cdns_starfive_pm_ops = {
> +	SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
> +};
> +
> +static const struct of_device_id cdns_starfive_of_match[] = {
> +	{ .compatible = "starfive,jh7110-usb", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
> +
> +static struct platform_driver cdns_starfive_driver = {
> +	.probe		= cdns_starfive_probe,
> +	.remove		= cdns_starfive_remove,
> +	.driver		= {
> +		.name	= "cdns3-starfive",
> +		.of_match_table	= cdns_starfive_of_match,
> +		.pm	= &cdns_starfive_pm_ops,
> +	},
> +};
> +module_platform_driver(cdns_starfive_driver);
> +
> +MODULE_ALIAS("platform:cdns3-starfive");
> +MODULE_AUTHOR("YanHong Wang <yanhong.wang at starfivetech.com>");
> +MODULE_AUTHOR("Mason Huo <mason.huo at starfivetech.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
> -- 
> 2.17.1
> 

-- 

Thanks,
Peter Chen



More information about the linux-riscv mailing list