[PATCH RFC 2/2] RISC-V: add T-Head vector errata handling
Conor Dooley
conor at kernel.org
Wed Mar 15 11:56:57 PDT 2023
On Tue, Feb 28, 2023 at 10:54:35PM +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at vrull.eu>
>
> T-Head C9xx cores implement an older version (0.7.1) of the vector
> specification.
>
> Relevant changes concerning the kernel are:
> - different placement of the SR_VS bit for the vector unit status
> - different encoding of the vsetvli instruction
> - different instructions for loads and stores
>
> And a fixed VLEN of 128.
>
> The in-kernel access to vector instances is limited to the save and
> restore of process states so the above mentioned areas can simply be
> handled via the alternatives framework, similar to other T-Head specific
> issues.
>
Apart from the "simple" form of the alternatives throwing me for a
second (too used to the _2 variant), this looks grand.
I think this needs a rebase as things stand based on what Andy's already
submitted, plus I know he's working on another revision - so I suppose I
shall withold leaving an R-b until this is closer to a final form!
Cheers,
Conor.
> Signed-off-by: Heiko Stuebner <heiko.stuebner at vrull.eu>
> ---
> arch/riscv/Kconfig.erratas | 13 +++
> arch/riscv/errata/thead/errata.c | 32 ++++++
> arch/riscv/include/asm/csr.h | 26 ++++-
> arch/riscv/include/asm/errata_list.h | 62 +++++++++++-
> arch/riscv/include/asm/vector.h | 139 +++++++++++++++++++++++++--
> 5 files changed, 256 insertions(+), 16 deletions(-)
>
> diff --git a/arch/riscv/Kconfig.erratas b/arch/riscv/Kconfig.erratas
> index 69621ae6d647..624cefc9fcd7 100644
> --- a/arch/riscv/Kconfig.erratas
> +++ b/arch/riscv/Kconfig.erratas
> @@ -79,4 +79,17 @@ config ERRATA_THEAD_PMU
>
> If you don't know what to do here, say "Y".
>
> +config ERRATA_THEAD_VECTOR
> + bool "Apply T-Head Vector errata"
> + depends on ERRATA_THEAD && RISCV_ISA_V
> + default y
> + help
> + The T-Head C9xx cores implement an earlier version 0.7.1
> + of the vector extensions.
> +
> + This will apply the necessary errata to handle the non-standard
> + behaviour via when switch to and from vector mode for processes.
> +
> + If you don't know what to do here, say "Y".
> +
> endmenu # "CPU errata selection"
> diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c
> index fac5742d1c1e..55b3aaa2468a 100644
> --- a/arch/riscv/errata/thead/errata.c
> +++ b/arch/riscv/errata/thead/errata.c
> @@ -12,6 +12,7 @@
> #include <asm/cacheflush.h>
> #include <asm/errata_list.h>
> #include <asm/patch.h>
> +#include <asm/vector.h>
> #include <asm/vendorid_list.h>
>
> static bool errata_probe_pbmt(unsigned int stage,
> @@ -63,6 +64,34 @@ static bool errata_probe_pmu(unsigned int stage,
> return true;
> }
>
> +static bool errata_probe_vector(unsigned int stage,
> + unsigned long arch_id, unsigned long impid)
> +{
> + if (!IS_ENABLED(CONFIG_ERRATA_THEAD_VECTOR))
> + return false;
> +
> + /* target-c9xx cores report arch_id and impid as 0 */
> + if (arch_id != 0 || impid != 0)
> + return false;
> +
> + if (stage == RISCV_ALTERNATIVES_EARLY_BOOT) {
> + /*
> + * Disable VECTOR to detect illegal usage of vector in kernel.
> + * This is normally done in _start_kernel but with the
> + * vector-1.0 SR_VS bits. VS is using [24:23] on T-Head's
> + * vector-0.7.1 and the vector-1.0-bits are unused there.
> + */
> + csr_clear(CSR_STATUS, SR_VS_THEAD);
> + return false;
> + }
> +
> + /* let has_vector() return true and set the static vlen */
> + static_branch_enable(&riscv_isa_ext_keys[RISCV_ISA_EXT_KEY_VECTOR]);
> + riscv_vsize = 128 / 8 * 32;
> +
> + return true;
> +}
> +
> static u32 thead_errata_probe(unsigned int stage,
> unsigned long archid, unsigned long impid)
> {
> @@ -77,6 +106,9 @@ static u32 thead_errata_probe(unsigned int stage,
> if (errata_probe_pmu(stage, archid, impid))
> cpu_req_errata |= BIT(ERRATA_THEAD_PMU);
>
> + if (errata_probe_vector(stage, archid, impid))
> + cpu_req_errata |= BIT(ERRATA_THEAD_VECTOR);
> +
> return cpu_req_errata;
> }
>
> diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
> index 8b06f2472915..8d16c11487aa 100644
> --- a/arch/riscv/include/asm/csr.h
> +++ b/arch/riscv/include/asm/csr.h
> @@ -24,11 +24,27 @@
> #define SR_FS_CLEAN _AC(0x00004000, UL)
> #define SR_FS_DIRTY _AC(0x00006000, UL)
>
> -#define SR_VS _AC(0x00000600, UL) /* Vector Status */
> -#define SR_VS_OFF _AC(0x00000000, UL)
> -#define SR_VS_INITIAL _AC(0x00000200, UL)
> -#define SR_VS_CLEAN _AC(0x00000400, UL)
> -#define SR_VS_DIRTY _AC(0x00000600, UL)
> +#define SR_VS_OFF _AC(0x00000000, UL)
> +
> +#define SR_VS_1_0 _AC(0x00000600, UL) /* Vector Status */
> +#define SR_VS_INITIAL_1_0 _AC(0x00000200, UL)
> +#define SR_VS_CLEAN_1_0 _AC(0x00000400, UL)
> +#define SR_VS_DIRTY_1_0 _AC(0x00000600, UL)
> +
> +#define SR_VS_THEAD _AC(0x01800000, UL) /* Vector Status */
> +#define SR_VS_INITIAL_THEAD _AC(0x00800000, UL)
> +#define SR_VS_CLEAN_THEAD _AC(0x01000000, UL)
> +#define SR_VS_DIRTY_THEAD _AC(0x01800000, UL)
> +
> +/*
> + * Always default to vector-1.0 handling in assembly and let the broken
> + * implementations handle their case separately.
> + */
> +#ifdef __ASSEMBLY__
> +#define SR_VS SR_VS_1_0
> +#else
> +
> +#endif
>
> #define SR_XS _AC(0x00018000, UL) /* Extension Status */
> #define SR_XS_OFF _AC(0x00000000, UL)
> diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
> index 95e626b7281e..3f93cdd1599f 100644
> --- a/arch/riscv/include/asm/errata_list.h
> +++ b/arch/riscv/include/asm/errata_list.h
> @@ -19,7 +19,8 @@
> #define ERRATA_THEAD_PBMT 0
> #define ERRATA_THEAD_CMO 1
> #define ERRATA_THEAD_PMU 2
> -#define ERRATA_THEAD_NUMBER 3
> +#define ERRATA_THEAD_VECTOR 3
> +#define ERRATA_THEAD_NUMBER 4
> #endif
>
> #define CPUFEATURE_SVPBMT 0
> @@ -157,6 +158,65 @@ asm volatile(ALTERNATIVE( \
> : "=r" (__ovl) : \
> : "memory")
>
> +#ifdef CONFIG_ERRATA_THEAD_PBMT
> +
> +#define ALT_VS_SHIFT 61
> +#define ALT_THEAD_VS_SHIFT 59
> +#define ALT_THEAD_SR_VS(_val, _vs) \
> +asm(ALTERNATIVE( "li %0, %1\t\nslli %0,%0,%3", \
> + "li %0, %2\t\nslli %0,%0,%4", THEAD_VENDOR_ID, \
> + ERRATA_THEAD_PBMT, CONFIG_ERRATA_THEAD_PBMT) \
> + : "=r"(_val) \
> + : "I"(prot##_MAIN >> ALT_SVPBMT_SHIFT), \
> + "I"(prot##_THEAD >> ALT_THEAD_PBMT_SHIFT), \
> + "I"(ALT_SVPBMT_SHIFT), \
> + "I"(ALT_THEAD_PBMT_SHIFT))
> +#else
> +#define ALT_THEAD_SR_VS(_val ## _MAIN)
> +#endif
> +
> +#ifdef CONFIG_ERRATA_THEAD_VECTOR
> +
> +#define THEAD_C9XX_CSR_VXSAT 0x9
> +#define THEAD_C9XX_CSR_VXRM 0xa
> +
> +/*
> + * Vector 0.7.1 as used for example on T-Head Xuantie cores, uses an older
> + * encoding for vsetvli (ta, ma vs. d1), so provide an instruction for
> + * vsetvli t4, x0, e8, m8, d1
> + */
> +#define THEAD_VSETVLI_T4X0E8M8D1 ".long 0x00307ed7\n\t"
> +
> +/*
> + * While in theory, the vector-0.7.1 vsb.v and vlb.v result in the same
> + * encoding as the standard vse8.v and vle8.v, compilers seem to optimize
> + * the call resulting in a different encoding and then using a value for
> + * the "mop" field that is not part of vector-0.7.1
> + * So encode specific variants for vstate_save and _restore.
> + */
> +#define THEAD_VSB_V_V0T0 ".long 0x02028027\n\t"
> +#define THEAD_VSB_V_V8T0 ".long 0x02028427\n\t"
> +#define THEAD_VSB_V_V16T0 ".long 0x02028827\n\t"
> +#define THEAD_VSB_V_V24T0 ".long 0x02028c27\n\t"
> +#define THEAD_VLB_V_V0T0 ".long 0x012028007\n\t"
> +#define THEAD_VLB_V_V8T0 ".long 0x012028407\n\t"
> +#define THEAD_VLB_V_V16T0 ".long 0x012028807\n\t"
> +#define THEAD_VLB_V_V24T0 ".long 0x012028c07\n\t"
> +
> +#define ALT_SR_VS_VECTOR_1_0_SHIFT 9
> +#define ALT_SR_VS_THEAD_SHIFT 23
> +
> +#define ALT_SR_VS(_val, prot) \
> +asm(ALTERNATIVE("li %0, %1\t\nslli %0,%0,%3", \
> + "li %0, %2\t\nslli %0,%0,%4", THEAD_VENDOR_ID, \
> + ERRATA_THEAD_VECTOR, CONFIG_ERRATA_THEAD_VECTOR) \
> + : "=r"(_val) \
> + : "I"(prot##_1_0 >> ALT_SR_VS_VECTOR_1_0_SHIFT), \
> + "I"(prot##_THEAD >> ALT_SR_VS_THEAD_SHIFT), \
> + "I"(ALT_SR_VS_VECTOR_1_0_SHIFT), \
> + "I"(ALT_SR_VS_THEAD_SHIFT))
> +#endif /* CONFIG_ERRATA_THEAD_VECTOR */
> +
> #endif /* __ASSEMBLY__ */
>
> #endif
> diff --git a/arch/riscv/include/asm/vector.h b/arch/riscv/include/asm/vector.h
> index ad9e6161dd89..ad91f783316e 100644
> --- a/arch/riscv/include/asm/vector.h
> +++ b/arch/riscv/include/asm/vector.h
> @@ -15,6 +15,55 @@
> #include <asm/hwcap.h>
> #include <asm/csr.h>
> #include <asm/asm.h>
> +#include <asm/errata_list.h>
> +
> +#ifdef CONFIG_ERRATA_THEAD_VECTOR
> +
> +static inline u32 riscv_sr_vs(void)
> +{
> + u32 val;
> +
> + ALT_SR_VS(val, SR_VS);
> + return val;
> +}
> +
> +static inline u32 riscv_sr_vs_initial(void)
> +{
> + u32 val;
> +
> + ALT_SR_VS(val, SR_VS_INITIAL);
> + return val;
> +}
> +
> +static inline u32 riscv_sr_vs_clean(void)
> +{
> + u32 val;
> +
> + ALT_SR_VS(val, SR_VS_CLEAN);
> + return val;
> +}
> +
> +static inline u32 riscv_sr_vs_dirty(void)
> +{
> + u32 val;
> +
> + ALT_SR_VS(val, SR_VS_DIRTY);
> + return val;
> +}
> +
> +#define SR_VS riscv_sr_vs()
> +#define SR_VS_INITIAL riscv_sr_vs_initial()
> +#define SR_VS_CLEAN riscv_sr_vs_clean()
> +#define SR_VS_DIRTY riscv_sr_vs_dirty()
> +
> +#else /* CONFIG_ERRATA_THEAD_VECTOR */
> +
> +#define SR_VS SR_VS_1_0
> +#define SR_VS_INITIAL SR_VS_INITIAL_1_0
> +#define SR_VS_CLEAN SR_VS_CLEAN_1_0
> +#define SR_VS_DIRTY SR_VS_DIRTY_1_0
> +
> +#endif /* CONFIG_ERRATA_THEAD_VECTOR */
>
> #define CSR_STR(x) __ASM_STR(x)
>
> @@ -29,6 +78,7 @@ static __always_inline bool has_vector(void)
> static inline void __vstate_clean(struct pt_regs *regs)
> {
> regs->status = (regs->status & ~(SR_VS)) | SR_VS_CLEAN;
> +
> }
>
> static inline void vstate_off(struct pt_regs *regs)
> @@ -58,30 +108,75 @@ static __always_inline void rvv_disable(void)
>
> static __always_inline void __vstate_csr_save(struct __riscv_v_state *dest)
> {
> - asm volatile (
> + register u32 t1 asm("t1") = (SR_FS);
> +
> + /*
> + * CSR_VCSR is defined as
> + * [2:1] - vxrm[1:0]
> + * [0] - vxsat
> + * The earlier vector spec implemented by T-Head uses separate
> + * registers for the same bit-elements, so just combine those
> + * into the existing output field.
> + *
> + * Additionally T-Head cores need FS to be enabled when accessing
> + * the VXRM and VXSAT CSRs, otherwise ending in illegal instructions.
> + */
> + asm volatile (ALTERNATIVE(
> "csrr %0, " CSR_STR(CSR_VSTART) "\n\t"
> "csrr %1, " CSR_STR(CSR_VTYPE) "\n\t"
> "csrr %2, " CSR_STR(CSR_VL) "\n\t"
> "csrr %3, " CSR_STR(CSR_VCSR) "\n\t"
> + __nops(5),
> + "csrs sstatus, t1\n\t"
> + "csrr %0, " CSR_STR(CSR_VSTART) "\n\t"
> + "csrr %1, " CSR_STR(CSR_VTYPE) "\n\t"
> + "csrr %2, " CSR_STR(CSR_VL) "\n\t"
> + "csrr %3, " CSR_STR(THEAD_C9XX_CSR_VXRM) "\n\t"
> + "slliw %3, %3, " CSR_STR(VCSR_VXRM_SHIFT) "\n\t"
> + "csrr t4, " CSR_STR(THEAD_C9XX_CSR_VXSAT) "\n\t"
> + "or %3, %3, t4\n\t"
> + "csrc sstatus, t1\n\t",
> + THEAD_VENDOR_ID,
> + ERRATA_THEAD_VECTOR, CONFIG_ERRATA_THEAD_VECTOR)
> : "=r" (dest->vstart), "=r" (dest->vtype), "=r" (dest->vl),
> - "=r" (dest->vcsr) : :);
> + "=r" (dest->vcsr) : "r"(t1) : "t4");
> }
>
> static __always_inline void __vstate_csr_restore(struct __riscv_v_state *src)
> {
> - asm volatile (
> + register u32 t1 asm("t1") = (SR_FS);
> +
> + /*
> + * Similar to __vstate_csr_save above, restore values for the
> + * separate VXRM and VXSAT CSRs from the vcsr variable.
> + */
> + asm volatile (ALTERNATIVE(
> "vsetvl x0, %2, %1\n\t"
> "csrw " CSR_STR(CSR_VSTART) ", %0\n\t"
> "csrw " CSR_STR(CSR_VCSR) ", %3\n\t"
> + __nops(6),
> + "csrs sstatus, t1\n\t"
> + "vsetvl x0, %2, %1\n\t"
> + "csrw " CSR_STR(CSR_VSTART) ", %0\n\t"
> + "srliw t4, %3, " CSR_STR(VCSR_VXRM_SHIFT) "\n\t"
> + "andi t4, t4, " CSR_STR(VCSR_VXRM_MASK) "\n\t"
> + "csrw " CSR_STR(THEAD_C9XX_CSR_VXRM) ", t4\n\t"
> + "andi %3, %3, " CSR_STR(VCSR_VXSAT_MASK) "\n\t"
> + "csrw " CSR_STR(THEAD_C9XX_CSR_VXSAT) ", %3\n\t"
> + "csrc sstatus, t1\n\t",
> + THEAD_VENDOR_ID,
> + ERRATA_THEAD_VECTOR, CONFIG_ERRATA_THEAD_VECTOR)
> : : "r" (src->vstart), "r" (src->vtype), "r" (src->vl),
> - "r" (src->vcsr) :);
> + "r" (src->vcsr), "r"(t1): "t4");
> }
>
> static inline void __vstate_save(struct __riscv_v_state *save_to, void *datap)
> {
> rvv_enable();
> __vstate_csr_save(save_to);
> - asm volatile (
> +
> + asm volatile (ALTERNATIVE(
> + "nop\n\t"
> "vsetvli t4, x0, e8, m8, ta, ma\n\t"
> "vse8.v v0, (%0)\n\t"
> "add %0, %0, t4\n\t"
> @@ -89,8 +184,18 @@ static inline void __vstate_save(struct __riscv_v_state *save_to, void *datap)
> "add %0, %0, t4\n\t"
> "vse8.v v16, (%0)\n\t"
> "add %0, %0, t4\n\t"
> - "vse8.v v24, (%0)\n\t"
> - : : "r" (datap) : "t4", "memory");
> + "vse8.v v24, (%0)\n\t",
> + "mv t0, %0\n\t"
> + THEAD_VSETVLI_T4X0E8M8D1
> + THEAD_VSB_V_V0T0
> + "addi t0, t0, 128\n\t"
> + THEAD_VSB_V_V8T0
> + "addi t0, t0, 128\n\t"
> + THEAD_VSB_V_V16T0
> + "addi t0, t0, 128\n\t"
> + THEAD_VSB_V_V24T0, THEAD_VENDOR_ID,
> + ERRATA_THEAD_VECTOR, CONFIG_ERRATA_THEAD_VECTOR)
> + : : "r" (datap) : "t0", "t4", "memory");
> rvv_disable();
> }
>
> @@ -98,7 +203,9 @@ static inline void __vstate_restore(struct __riscv_v_state *restore_from,
> void *datap)
> {
> rvv_enable();
> - asm volatile (
> +
> + asm volatile (ALTERNATIVE(
> + "nop\n\t"
> "vsetvli t4, x0, e8, m8, ta, ma\n\t"
> "vle8.v v0, (%0)\n\t"
> "add %0, %0, t4\n\t"
> @@ -106,8 +213,20 @@ static inline void __vstate_restore(struct __riscv_v_state *restore_from,
> "add %0, %0, t4\n\t"
> "vle8.v v16, (%0)\n\t"
> "add %0, %0, t4\n\t"
> - "vle8.v v24, (%0)\n\t"
> - : : "r" (datap) : "t4");
> + "vle8.v v24, (%0)\n\t",
> +
> + "mv t0, %0\n\t"
> + THEAD_VSETVLI_T4X0E8M8D1
> + THEAD_VLB_V_V0T0
> + "addi t0, t0, 128\n\t"
> + THEAD_VLB_V_V8T0
> + "addi %0, %0, 128\n\t"
> + THEAD_VLB_V_V16T0
> + "addi %0, %0, 128\n\t"
> + THEAD_VLB_V_V24T0, THEAD_VENDOR_ID,
> + ERRATA_THEAD_VECTOR, CONFIG_ERRATA_THEAD_VECTOR)
> + : : "r" (datap) : "t0", "t4");
> +
> __vstate_csr_restore(restore_from);
> rvv_disable();
> }
> --
> 2.39.0
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230315/77c7b3d3/attachment.sig>
More information about the linux-riscv
mailing list