[PATCH v3 0/4] crypto: starfive - Add drivers for crypto engine

Jia Jie Ho jiajie.ho at starfivetech.com
Mon Mar 13 06:56:42 PDT 2023


This patch series adds kernel driver support for StarFive JH7110 crypto
engine. The first patch adds Documentations for the device and Patch 2
adds device probe and DMA init for the module. Patch 3 adds crypto and
DMA dts node for VisionFive 2 board. Patch 4 adds hash/hmac support to
the module.

Patch 3 needs to be applied on top of:
https://patchwork.kernel.org/project/linux-riscv/patch/20230221024645.127922-18-hal.feng@starfivetech.com/
https://patchwork.kernel.org/project/linux-riscv/cover/20230120024445.244345-1-xingyu.wu@starfivetech.com/

Changes v2->v3:
- Only implement digest and use fallback for other ops (Herbert)
- Use interrupt instead of polling for hash complete (Herbert)
- Remove manual data copy from out-of-bound memory location as it will
  be handled by DMA API. (Christoph & Herbert)

Changes v1->v2:
- Fixed yaml filename and format (Krzysztof)
- Removed unnecessary property names in yaml (Krzysztof)
- Moved of_device_id table close to usage (Krzysztof)
- Use dev_err_probe for error returns (Krzysztof)
- Dropped redundant readl and writel wrappers (Krzysztof)
- Updated commit signed offs (Conor)
- Dropped redundant node in dts, module set to on in dtsi (Conor)

Jia Jie Ho (4):
  dt-bindings: crypto: Add StarFive crypto module
  crypto: starfive - Add crypto engine support
  riscv: dts: starfive: Add crypto and DMA node for VisionFive 2
  crypto: starfive - Add hash and HMAC support

 .../crypto/starfive,jh7110-crypto.yaml        |   70 ++
 MAINTAINERS                                   |    7 +
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |   28 +
 drivers/crypto/Kconfig                        |    1 +
 drivers/crypto/Makefile                       |    1 +
 drivers/crypto/starfive/Kconfig               |   21 +
 drivers/crypto/starfive/Makefile              |    4 +
 drivers/crypto/starfive/jh7110-cryp.c         |  239 ++++
 drivers/crypto/starfive/jh7110-cryp.h         |  134 +++
 drivers/crypto/starfive/jh7110-hash.c         | 1041 +++++++++++++++++
 10 files changed, 1546 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
 create mode 100644 drivers/crypto/starfive/Kconfig
 create mode 100644 drivers/crypto/starfive/Makefile
 create mode 100644 drivers/crypto/starfive/jh7110-cryp.c
 create mode 100644 drivers/crypto/starfive/jh7110-cryp.h
 create mode 100644 drivers/crypto/starfive/jh7110-hash.c

-- 
2.25.1




More information about the linux-riscv mailing list