[PATCH v6 6/8] net: stmmac: starfive_dmac: Add phy interface settings

Samin Guo samin.guo at starfivetech.com
Sun Mar 12 20:46:43 PDT 2023


dwmac supports multiple modess. When working under rmii and rgmii,
you need to set different phy interfaces.

According to the dwmac document, when working in rmii, it needs to be
set to 0x4, and rgmii needs to be set to 0x1.

The phy interface needs to be set in syscon, the format is as follows:
starfive,syscon: <&syscon, offset, shift>

Signed-off-by: Samin Guo <samin.guo at starfivetech.com>
Tested-by: Tommaso Merciai <tomm.merciai at gmail.com>
---
 .../ethernet/stmicro/stmmac/dwmac-starfive.c  | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
index ef5a769b1c75..84690c8f0250 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
@@ -13,6 +13,10 @@
 
 #include "stmmac_platform.h"
 
+#define STARFIVE_DWMAC_PHY_INFT_RGMII	0x1
+#define STARFIVE_DWMAC_PHY_INFT_RMII	0x4
+#define STARFIVE_DWMAC_PHY_INFT_FIELD	0x7U
+
 struct starfive_dwmac {
 	struct device *dev;
 	struct clk *clk_tx;
@@ -44,6 +48,43 @@ static void starfive_dwmac_fix_mac_speed(void *priv, unsigned int speed)
 		dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
 }
 
+static int starfive_dwmac_set_mode(struct plat_stmmacenet_data *plat_dat)
+{
+	struct starfive_dwmac *dwmac = plat_dat->bsp_priv;
+	struct regmap *regmap;
+	unsigned int args[2];
+	unsigned int mode;
+
+	switch (plat_dat->interface) {
+	case PHY_INTERFACE_MODE_RMII:
+		mode = STARFIVE_DWMAC_PHY_INFT_RMII;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		mode = STARFIVE_DWMAC_PHY_INFT_RGMII;
+		break;
+
+	default:
+		dev_err(dwmac->dev, "unsupported interface %d\n",
+			plat_dat->interface);
+		return -EINVAL;
+	}
+
+	regmap = syscon_regmap_lookup_by_phandle_args(dwmac->dev->of_node,
+						      "starfive,syscon",
+						      2, args);
+	if (IS_ERR(regmap)) {
+		dev_err(dwmac->dev, "syscon regmap failed.\n");
+		return -ENXIO;
+	}
+
+	/* args[0]:offset  args[1]: shift */
+	return regmap_update_bits(regmap, args[0],
+				  STARFIVE_DWMAC_PHY_INFT_FIELD << args[1],
+				  mode << args[1]);
+}
+
 static int starfive_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -89,6 +130,12 @@ static int starfive_dwmac_probe(struct platform_device *pdev)
 	plat_dat->bsp_priv = dwmac;
 	plat_dat->dma_cfg->dche = true;
 
+	err = starfive_dwmac_set_mode(plat_dat);
+	if (err) {
+		dev_err(&pdev->dev, "dwmac set mode failed.\n");
+		return err;
+	}
+
 	err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (err) {
 		stmmac_remove_config_dt(pdev, plat_dat);
-- 
2.17.1




More information about the linux-riscv mailing list