[PATCH v4 1/3] dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110
Xingyu Wu
xingyu.wu at starfivetech.com
Tue Mar 7 19:40:34 PST 2023
Add bindings to describe the watchdog for the StarFive JH7100/JH7110 SoC.
And Use JH7100 as first StarFive SoC with watchdog.
Signed-off-by: Xingyu Wu <xingyu.wu at starfivetech.com>
---
.../watchdog/starfive,jh7100-wdt.yaml | 71 +++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
diff --git a/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
new file mode 100644
index 000000000000..68f3f6fd08a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/starfive,jh7100-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Watchdog for JH7100 and JH7110 SoC
+
+maintainers:
+ - Xingyu Wu <xingyu.wu at starfivetech.com>
+ - Samin Guo <samin.guo at starfivetech.com>
+
+description:
+ The JH7100 and JH7110 watchdog both are 32 bit counters. JH7100 watchdog
+ has only one timeout phase and reboots. And JH7110 watchdog has two
+ timeout phases. At the first phase, the signal of watchdog interrupt
+ output(WDOGINT) will rise when counter is 0. The counter will reload
+ the timeout value. And then, if counter decreases to 0 again and WDOGINT
+ isn't cleared, the watchdog will reset the system unless the watchdog
+ reset is disabled.
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ enum:
+ - starfive,jh7100-wdt
+ - starfive,jh7110-wdt
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: APB clock
+ - description: Core clock
+
+ clock-names:
+ items:
+ - const: apb
+ - const: core
+
+ resets:
+ items:
+ - description: APB reset
+ - description: Core reset
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog at 12480000 {
+ compatible = "starfive,jh7100-wdt";
+ reg = <0x12480000 0x10000>;
+ clocks = <&clk 171>,
+ <&clk 172>;
+ clock-names = "apb", "core";
+ resets = <&rst 99>,
+ <&rst 100>;
+ };
--
2.25.1
More information about the linux-riscv
mailing list