[RFC PATCH 2/4] pinctrl: renesas: pinctrl-rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>

Validate the GPIO pin request in rzg2l_gpio_request() callback using
rzg2l_validate_gpio_pin() function.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index a0c2e585e765..2fc1b880db0c 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -780,12 +780,18 @@ static const struct pinconf_ops rzg2l_pinctrl_confops = {
 static int rzg2l_gpio_request(struct gpio_chip *chip, unsigned int offset)
 {
 	struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
+	const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[offset];
+	u64 *pin_data = pin->drv_data;
 	u32 port = RZG2L_PIN_ID_TO_PORT(offset);
 	u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
 	unsigned long flags;
 	u8 reg8;
 	int ret;
 
+	ret = rzg2l_validate_gpio_pin(pctrl, *pin_data, port, bit);
+	if (ret)
+		return ret;
+
 	ret = pinctrl_gpio_request(chip->base + offset);
 	if (ret)
 		return ret;
-- 
2.34.1