[PATCH v3 0/3] Add timer driver for StarFive JH7110 RISC-V SoC

Xingyu Wu xingyu.wu at starfivetech.com
Mon Jun 26 22:53:10 PDT 2023


This patch serises are to add timer driver for the StarFive JH7110
RISC-V SoC. The first patch adds documentation to describe device
tree bindings. The subsequent patch adds timer driver and support
JH7110 SoC. The last patch adds device node about timer in JH7110
dts.

This timer has four free-running 32 bit counters and runs in 24MHz
clock on StarFive JH7110 SoC. And each channel(counter) triggers
an interrupt when timeout. They support one-shot mode and
continuous-run mode.

Changes since v2:
- Rebased on 6.4-rc7.
- Merged the header file into the c file.
- Renamed the functions from 'starfive_' to 'jh7110_'
- Used function 'clocksource_register_hz' instead of
  'clocksource_mmio_init'.

v2: https://lore.kernel.org/all/20230320135433.144832-1-xingyu.wu@starfivetech.com/

Changes since v1: 
- Added description about timer and modified properties' description
  in dt-bindings.
- Dropped the 'interrupt-names' and 'clock-frequency' in dt-bindings.
- Renamed the functions and added 'starfive_'
- Modified that the driver probe by platform bus.

v1: https://lore.kernel.org/all/20221223094801.181315-1-xingyu.wu@starfivetech.com/

Xingyu Wu (3):
  dt-bindings: timer: Add timer for StarFive JH7110 SoC
  clocksource: Add JH7110 timer driver
  riscv: dts: jh7110: starfive: Add timer node

 .../bindings/timer/starfive,jh7110-timer.yaml |  96 ++++
 MAINTAINERS                                   |   7 +
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |  20 +
 drivers/clocksource/Kconfig                   |  11 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-jh7110.c            | 485 ++++++++++++++++++
 6 files changed, 620 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/starfive,jh7110-timer.yaml
 create mode 100644 drivers/clocksource/timer-jh7110.c

-- 
2.17.1




More information about the linux-riscv mailing list