[PATCH v2 3/3] riscv: dts: allwinner: d1: Add pwm node

[Conor Dooley]

On Fri, Jun 23, 2023 at 06:00:01PM +0300, Aleksandr Shubin wrote:
> D1 and T113s contain a pwm controller with 8 channels.
> This controller is supported by the sun20i-pwm driver.
> 
> Add a device tree node for it.
> 
> Signed-off-by: Aleksandr Shubin <privatesub2 at gmail.com>
> ---
>  arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index 922e8e0e2c09..50f0f761527b 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -127,6 +127,18 @@ uart3_pb_pins: uart3-pb-pins {
>  			};
>  		};
>  
> +		pwm: pwm at 2000c00 {
> +			compatible = "allwinner,sun20i-d1-pwm";
> +			reg = <0x02000c00 0x400>;
> +			clocks = <&dcxo>,
> +				 <&ccu CLK_BUS_PWM>;
> +			clock-names = "hosc", "bus";
> +			resets = <&ccu RST_BUS_PWM>;

> +			allwinner,pwm-channels = <8>;

This fails dtbs_check. Please test the dts against the bindings.

Cheers,
Conor.

> +			status = "disabled";
> +			#pwm-cells = <0x3>;
> +		};
> +
>  		ccu: clock-controller at 2001000 {
>  			compatible = "allwinner,sun20i-d1-ccu";
>  			reg = <0x2001000 0x1000>;
> -- 
> 2.25.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230623/8538dc2d/attachment.sig>