[PATCH v3 3/3] riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC

William Qiu william.qiu at starfivetech.com
Mon Jun 19 01:35:17 PDT 2023


Add the quad spi controller node for the StarFive JH7110 SoC.

Co-developed-by: Ziv Xu <ziv.xu at starfivetech.com>
Signed-off-by: Ziv Xu <ziv.xu at starfivetech.com>
Signed-off-by: William Qiu <william.qiu at starfivetech.com>
Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 32 +++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 18 +++++++++++
 2 files changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 2a6d81609284..22212c1150f9 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -126,6 +126,38 @@ &i2c6 {
 	status = "okay";
 };
 
+&qspi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nor_flash: flash at 0 {
+		compatible = "jedec,spi-nor";
+		reg=<0>;
+		cdns,read-delay = <5>;
+		spi-max-frequency = <12000000>;
+		cdns,tshsl-ns = <1>;
+		cdns,tsd2d-ns = <1>;
+		cdns,tchsh-ns = <1>;
+		cdns,tslch-ns = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			spl at 0 {
+				reg = <0x0 0x20000>;
+			};
+			uboot at 100000 {
+				reg = <0x100000 0x300000>;
+			};
+			data at f00000 {
+				reg = <0xf00000 0x100000>;
+			};
+		};
+	};
+};
+
 &sysgpio {
 	i2c0_pins: i2c0-0 {
 		i2c-pins {
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..0b24f9e66e67 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -440,6 +440,24 @@ i2c6: i2c at 12060000 {
 			status = "disabled";
 		};
 
+		qspi: spi at 13010000 {
+			compatible = "starfive,jh7110-qspi", "cdns,qspi-nor";
+			reg = <0x0 0x13010000 0x0 0x10000
+				0x0 0x21000000 0x0 0x400000>;
+			interrupts = <25>;
+			clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>,
+				 <&syscrg JH7110_SYSCLK_QSPI_AHB>,
+				 <&syscrg JH7110_SYSCLK_QSPI_APB>;
+			clock-names = "ref", "ahb", "apb";
+			resets = <&syscrg JH7110_SYSRST_QSPI_APB>,
+				 <&syscrg JH7110_SYSRST_QSPI_AHB>,
+				 <&syscrg JH7110_SYSRST_QSPI_REF>;
+			reset-names = "qspi", "qspi-ocp", "rstc_ref";
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+		};
+
 		syscrg: clock-controller at 13020000 {
 			compatible = "starfive,jh7110-syscrg";
 			reg = <0x0 0x13020000 0x0 0x10000>;
-- 
2.34.1




More information about the linux-riscv mailing list