[PATCH v2 07/23] mips: update_mmu_cache() can replace __update_tlb()
Nathan Chancellor
nathan at kernel.org
Wed Jun 14 16:17:58 PDT 2023
Hi Hugh,
On Thu, Jun 08, 2023 at 12:17:24PM -0700, Hugh Dickins wrote:
> Don't make update_mmu_cache() a wrapper around __update_tlb(): call it
> directly, and use the ptep (or pmdp) provided by the caller, instead of
> re-calling pte_offset_map() - which would raise a question of whether a
> pte_unmap() is needed to balance it.
>
> Check whether the "ptep" provided by the caller is actually the pmdp,
> instead of testing pmd_huge(): or test pmd_huge() too and warn if it
> disagrees? This is "hazardous" territory: needs review and testing.
>
> Signed-off-by: Hugh Dickins <hughd at google.com>
> ---
> arch/mips/include/asm/pgtable.h | 15 +++------------
> arch/mips/mm/tlb-r3k.c | 5 +++--
> arch/mips/mm/tlb-r4k.c | 9 +++------
> 3 files changed, 9 insertions(+), 20 deletions(-)
>
> diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
> index 574fa14ac8b2..9175dfab08d5 100644
> --- a/arch/mips/include/asm/pgtable.h
> +++ b/arch/mips/include/asm/pgtable.h
> @@ -565,15 +565,8 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
> }
> #endif
>
> -extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
> - pte_t pte);
> -
> -static inline void update_mmu_cache(struct vm_area_struct *vma,
> - unsigned long address, pte_t *ptep)
> -{
> - pte_t pte = *ptep;
> - __update_tlb(vma, address, pte);
> -}
> +extern void update_mmu_cache(struct vm_area_struct *vma,
> + unsigned long address, pte_t *ptep);
>
> #define __HAVE_ARCH_UPDATE_MMU_TLB
> #define update_mmu_tlb update_mmu_cache
> @@ -581,9 +574,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
> static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
> unsigned long address, pmd_t *pmdp)
> {
> - pte_t pte = *(pte_t *)pmdp;
> -
> - __update_tlb(vma, address, pte);
> + update_mmu_cache(vma, address, (pte_t *)pmdp);
> }
>
> /*
> diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
> index 53dfa2b9316b..e5722cd8dd6d 100644
> --- a/arch/mips/mm/tlb-r3k.c
> +++ b/arch/mips/mm/tlb-r3k.c
> @@ -176,7 +176,8 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
> }
> }
>
> -void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
> +void update_mmu_cache(struct vm_area_struct *vma,
> + unsigned long address, pte_t *ptep)
> {
> unsigned long asid_mask = cpu_asid_mask(¤t_cpu_data);
> unsigned long flags;
> @@ -203,7 +204,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
> BARRIER;
> tlb_probe();
> idx = read_c0_index();
> - write_c0_entrylo0(pte_val(pte));
> + write_c0_entrylo0(pte_val(*ptep));
> write_c0_entryhi(address | pid);
> if (idx < 0) { /* BARRIER */
> tlb_write_random();
> diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
> index 1b939abbe4ca..c96725d17cab 100644
> --- a/arch/mips/mm/tlb-r4k.c
> +++ b/arch/mips/mm/tlb-r4k.c
> @@ -290,14 +290,14 @@ void local_flush_tlb_one(unsigned long page)
> * updates the TLB with the new pte(s), and another which also checks
> * for the R4k "end of page" hardware bug and does the needy.
> */
> -void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
> +void update_mmu_cache(struct vm_area_struct *vma,
> + unsigned long address, pte_t *ptep)
> {
> unsigned long flags;
> pgd_t *pgdp;
> p4d_t *p4dp;
> pud_t *pudp;
> pmd_t *pmdp;
> - pte_t *ptep;
> int idx, pid;
>
> /*
> @@ -326,10 +326,9 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
> idx = read_c0_index();
> #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
> /* this could be a huge page */
> - if (pmd_huge(*pmdp)) {
> + if (ptep == (pte_t *)pmdp) {
> unsigned long lo;
> write_c0_pagemask(PM_HUGE_MASK);
> - ptep = (pte_t *)pmdp;
> lo = pte_to_entrylo(pte_val(*ptep));
> write_c0_entrylo0(lo);
> write_c0_entrylo1(lo + (HPAGE_SIZE >> 7));
> @@ -344,8 +343,6 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
> } else
> #endif
> {
> - ptep = pte_offset_map(pmdp, address);
> -
> #if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
> #ifdef CONFIG_XPA
> write_c0_entrylo0(pte_to_entrylo(ptep->pte_high));
> --
> 2.35.3
>
I just bisected a crash while powering down a MIPS machine in QEMU to
this change as commit 8044511d3893 ("mips: update_mmu_cache() can
replace __update_tlb()") in linux-next. Unfortunately, I can still
reproduce it with the existing fix you have for this change on the
mailing list, which is present in next-20230614.
I can reproduce it with the GCC 13.1.0 on kernel.org [1].
$ make -skj"$(nproc)" ARCH=mips CROSS_COMPILE=mips-linux- mrproper malta_defconfig vmlinux
$ qemu-system-mipsel \
-display none \
-nodefaults \
-cpu 24Kf \
-machine malta \
-kernel vmlinux \
-initrd rootfs.cpio \
-m 512m \
-serial mon:stdio
...
Linux version 6.4.0-rc6-next-20230614 (nathan at dev-arch.thelio-3990X) (mips-linux-gcc (GCC) 13.1.0, GNU ld (GNU Binutils) 2.40) #1 SMP Wed Jun 14 16:13:02 MST 2023
...
Run /init as init process
process '/bin/busybox' started with executable stack
do_page_fault(): sending SIGSEGV to init for invalid read access from 0000003c
epc = 77b893dc in ld-uClibc-1.0.39.so[77b84000+8000]
ra = 77b8930c in ld-uClibc-1.0.39.so[77b84000+8000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
The rootfs is available at [2] if it is needed. I am more than happy to
provide additional information or test patches if necessary.
[1]: https://mirrors.edge.kernel.org/pub/tools/crosstool/
[2]: https://github.com/ClangBuiltLinux/boot-utils/releases/download/20230609-194440/mipsel-rootfs.cpio.zst
Cheers,
Nathan
More information about the linux-riscv
mailing list